Article Per Year (5 Year)
p-Index From 2021 - 2026
1.404
P-Index
This Author published in this journals
All Journal International Journal of Electrical and Computer Engineering TELKOMNIKA (Telecommunication Computing Electronics and Control) Bulletin of Electrical Engineering and Informatics
Nguyen Thi Phuong Loan
Posts and Telecommunications Institute of Technology
Computer Science & IT Electrical & Electronics Engineering

Published : 32 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 15 Documents
Search
Journal : telkomnika telecommunication computing electronics and control

 1   2 
Na3Ce(PO4)2:Tb3+ and Na(Mg2–xMnX)LiSi4O10F2:Mn phosphors: a suitable selection for enhancing color quality and luminous flux of remote white light-emitting diodes Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 4: August 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i4.13723

Abstract

This study proposed the TRP, a remote phosphor structure that has 3 phosphor layers, to ehance the chromatic quality and lumen output for white light-emitting diodes devices (WLEDs). The arrangment of phosphor layers is yellow YAG:Ce3+ phosphor, green Na3Ce(PO4)2:Tb3+ phosphor, and red Na(Mg2–xMnX)LiSi4O10F2:Mn phosphor from bottom to top. Red Na(Mg2–xMnX)LiSi4O10F2:Mn phosphor is used for the red light component to boost color rendering index (CRI). The green layer Na3Ce(PO4)2:Tb3+ phosphor is utilized for the green light component to produce higher luminous flux (LF). With the addition of red and green phosphor, the yellow YAG:Ce3+ concentration must decrease to maintain the 6000 K color temperature. The research results show that red phosphor Na(Mg2–xMnX)LiSi4O10F2:Mn concentration is beneficial for CRI, while green phosphor Na3Ce(PO4)2:Tb3+ is detrimental to CRI. Morever, CQS reaction with red and green phosphor is also studied, which show notable improvement when Na(Mg2–xMnX)LiSi4O10F2:Mn concentration is from 10%-14%, regardless of Na3Ce(PO4)2:Tb3+. The luminous flux (LF) can also increase for more than 40% with the reduced light loss and added green phosphor. Research results are valuable references for producers to enhance the color quality and the light emission of WLEDs.
Acquiring higher lumen efficacy and color rendering index with green NaYF4:Er3+Yb3+ and red α-SrO·3B2O3:Sm2+ layers for designing remote phosphor LED My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 6: December 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i6.13796

Abstract

Lighting devices that apply diodes to create white light-emitting diodes (WLEDs) can achieve remarkable results in color quality, especially those containing quantum dots (QDs) and phosphor. The technique to create an appropriate package is providing spaces between the QDs and phosphor components which helps decrease the ratio of the reabsorption losses and keeps the QDs surface ligands constant. The research aims to perfect the constructing method of remote phosphor configuration containing quantum dots and phosphor materials that based on lighting properties and temperature feature of WLEDs. The infrared thermography is the tool to measure and analyze total emitted light and emission ranges of the device. This device is also used in temperature simulation and experimental verification. At the given mA of 60, the WLEDs structure with green QDs layer above the phosphor layer results in 996 lm luminous flux (LF), and Ra = 57 in color rendering ability. Meanwhile, luminous flux of WLEDs with red QDs-on-phosphor structure is 632, and Ra = 70. Furthermore, comparing with the green QDs-on-phosphor type, the red QDs-on-phosphor type emitted less LF. However, the red QDs-on-phosphor type can be the most effective package design to achieve color rendering ability.
Comparison of calcium carbonate and titania particles on improving color homogeneity and luminous flux of WLEDs Thinh Cong Tran; Nguyen Doan Quoc Anh; Nguyen Thi Phuong Loan
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 5: October 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i5.13552

Abstract

In this paper, the experiments on phosphor-converted LEDs (pc-LEDs) with a correlated color temperature (CCT) of 8500K has been conducted with the scattering enhancement particles (SEPs) to achieve the higher color uniformity and emitted luminous flux of pc-LEDs. Moreover, this paper also introduced about choosing scattering enhancement particles (SEPs), including calcium carbonate (CaCO3) and titania (TiO2), and compared these particles’ properties by adding them into the yellow Y3Al5O12:Ce3+ phosphor compounding. Afterward, the LightTools program was applied to illustrate the optical simulation, and obtained results was analyzed and verified by applying the Mie-scattering theory. The scattering coefficients, the anisotropic scattering, the reduced scattering, and the scattering amplitudes at 455 nm and 595 nm are included in the scattering computation of SEPs. According to researched results, among the SEPs, TiO2 particles result in the highest value of color uniformity. However, a rise in their concentration is the cause of a sharp decline in luminous flux. Meanwhile, CaCO3 particles show the ability of reducing the deviated level in correlated color temperature by 620K if there is employed 30% of CaCO3 concentration. Hence, CaCO3 particles are the recommendation for achieving higher chromatic homogeneity and lumen output.
Enhancing light sources color homogeneity in high-power phosphor-based white LED using ZnO particles Anh-Minh D. Tran; Nguyen Doan Quoc Anh; Nguyen Thi Phuong Loan
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 5: October 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i5.14198

Abstract

Color uniformity is one of the essentials for the on-going development of WLED. To achieve a high color uniformity index, increasing the scattering events within the phosphor layers was reported to be the most efficient method and in this article, ZnO is the chosen material to apply in this method. After analyzing the scattering properties through the scattering cross-section , scattering coefficient  and scattering phase function , the which outcomes comfirm that ZnO can enhance the scattered light in the phosphor layers. Moreover, the findings from the study of ZnO concentration from 2% to 26% suggest that color uniformity also depends on the fluctuation of ZnO concentration, therefore, to control color uniformity the focus should be implied on both size and concentration of ZnO. The experimental results from this research show that the luminous flux of WLED is at the peak if the concentration of ZnO is at 6%, and when the concentration of ZnO is at 18% and has 100 nm particles size, the ΔCCT reaches the lowest level. The final choice should be based on the desired characteristic of WLEDs, however, if the WLED need to excel in both luminous flux and ΔCCT then 6% ZnO concentration with particles size from 100 nm-300 nm is the optimal choice.
Improving optical properties of remote phosphor LED using green Y2O3:Ho3+ and red Mg4(F)(Ge, Sn)O6:Mn2+ layers My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 6: December 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i6.13797

Abstract

The lighting device that employs diodes to create white light (WLEDs) with quantum dots (QDs) and phosphor layers is a promising lighting method that is increasingly used in many fields on account of the remarkable color expressing ability. The QDs film is usually placed apart from the phosphor layer according to the packaging configuration to prevent light loss due to backscattering as well as preserve the consistency of the ligands on the QDs surface. The article also conducted experiments to compare the lighting properties and thermal output of the two packaging orders of QDs and phosphor. The heat discharing ranges were simulated with thermography technology, moreover, other parameters such as light energy emission and PL spectra are acquired to evaluate the efficiency of the packaging order. The results from the practical experiment show that while under 10% wt., the luminous output (LO) of green QDs-on-phosphor structure reaches 1130 lm, higher than the red QDs-on-phosphor structure with 878 lm, and the color rendering value in the configuration with red QDs on phosphor is Ra = 74 are higher than Ra = 68 index of the green QDs-on-phosphor structure. As a result, the QDs-on-phosphor is determined as the better packaging configuration to choose to achieve an overall improvement in lighting efficiency, color rendering index
The influences of calcium fluoride and silica particles on improving color homogeneity of WLEDs Anh-Minh D. Tran; Nguyen Doan Quoc Anh; Nguyen Thi Phuong Loan
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 5: October 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i5.13571

Abstract

The LEDs lighting device with phosphor ingredient (pcLEDs) is among the most common lighting methods in recent years and evaluated by chromatic uniformity and lighting capacity. Therefore, we introduce the phosphor particles that can improve the scattering efficiency (SEPs) to apply in pcLEDs at 8500 K correlated color temperature (CCT) with the expectation to produce better pcLEDs by enhancing both quantity and quality of emitted light. Combining various materials such as CaF2 and SiO2 with yellow Y3Al5O12:Ce3+ phosphor composition in the pcLEDs simulation created by the LightTools program is the mechanism of this research. The simulated pcLEDs are tested and the results will be verified with Mie-scattering theory. The observation of the simulation leads to the conclusion about the scattering coefficients of SEPs at 455 nm and 595 nm wavelengths. The calculation showed that CaF2 is better for color homogeneity yet suffer from luminous flux deficiency as the concentration gets higher. On the other hand, SiO2 is the scattering enhancement material that can maintain high luminous flux regardless of its concentration. 
Study of red-emitting LaAsO4:Eu3+ phosphor for color rendering index improvement of WLEDs with dual-layer remote phosphor geometry My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 6: December 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i6.13637

Abstract

The remote phosphor structure is often disadvantageous in color quality but in terms of optics it is more convenient when compared to other phosphor structures such as conformal or in-cup ones. From this disadvantage, there are many studies to improve its chromatic output. In this research paper, we propose a dual-layer remote phosphor geometry for the improvement of white light-emitting diodes (WLEDs) in two parameters: color rendering index (CRI) and color quality scale (CQS). The 7700 K WLEDs are used in this study. The idea of the study is to place a red phosphor layer LaAsO4:Eu3+ on the yellow phosphor YAG: Ce3+, and then find the concentration of LaAsO4:Eu3+ in an appropriate way to achieve the highest color quality. The results showed that LaAsO4:Eu3+ bring great benefits for enhancing CRI and CQS. In particular, the greater the concentration of LaAsO4:Eu3+, the greater the CRI and CQS because the portion of red lights in WLEDs increases. However, the decrease in lumen output occurs when the concentration of LaAsO4:Eu3+ increases excessively. This is proved thanks to Mie-scattering theory and Beer-Lambert law. The results of important articles in WLEDs fabrication have greatly contributed to a higher white light quality.
Design of freeform lens for WLEDs on the fishing boat Nguyen Thi Phuong Loan; Thinh Cong Tran
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 3: June 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i3.12085

Abstract

In this article, a free secondary lens is designed for an LED fishing/working lamp (LFWL), which is recommended for the purpose of taking the place of a traditional high-intensity discharge (HID) fishing lamp. To serve the lighting needs of fishing and the on-board activities on fishing boats, the innovative LED lamp is proposed. To make the freeform lens in our optics design process, we depended on Gaussian decomposition. In this way, it is easy to approach the targeted light intensity distribution curve (LIDC) of the LFWL lens. The simulated results show that the performance of the LED fishing/working lamps is much better than that of HID fishing lamps for illumination onboard, on the sea-surface, and underwater. Meanwhile, a lighting efficiency of 91% with the power consumption reduction of more than 50% can be achieved when the proposed LED fishing/working lamps are used instead of the HID fishing lamps.
The application of green YF3:Er3+,Yb3+ and red MgSr3Si2O8:Eu2+,Mn2+ layers to remote phosphor LED My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 6: December 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i6.13827

Abstract

White light-emitting diodes (WLEDs) with quantum dots (QDs) and phosphor have pulled in huge consideration because of their incredible shading rendering capacity. In the bundling procedure, a QDs film and a phosphor silicone layer will in general be isolated for lessening the reabsorption misfortunes and keeping the QDs surface molecules in a good condition. This examination explored the bundling succession of QDs and phosphor layers to the optical and warm exhibitions of WLEDs. The emitted optical power and PL spectra were estimated and dissected, while an infrared warm imager was utilized to reenact and approve tentatively the temperature fields. The results reveal that at 60 mA, WLEDs with green QDs-on-phosphor type accomplished lumen output (LO) of 1578 lm, with shading rendering record (CRI) of Ra = 60, while the red QDs-on-phosphor type WLEDs exhibited lower LO of 1000 lm, with Ra = 82. In addition, the QDs-onphosphor type WLEDs generated less warmth than the other, and as a result, the most noteworthy temperature in this packaged type was lower than the other. Additionally, its temperature contrast can arrive at 12.3°C. Along these lines, regarding bundling arrangement, the QDs-on-phosphor type is an ideal bundling design to better the optical productivity and shading rendering capacity, as well as lower gadget temperature.
The application of green YPO4:Ce3+,Tb3+ and red LiLaO2:Eu3+ layers to remote phosphor LED My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 18, No 6: December 2020
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v18i6.13647

Abstract

Remote phosphor structure is commonly limited in color quality, but has greater luminous flux when comparing to structures with in-cup or conformal coating. From this dilemma, various researches with advance modifications have been proposed to perfect the chromatic performance of remote structure. In this research, we reach higher color quality by obtaining better values in quality indcators such as color rendering index (CRI) and color quality scale (CQS) with the dual-layer phosphor in our remote white light-emitting diodes (WLEDs). The idea is to ultize WLEDs with 7000 K correlated color temperature (CCT) and create dual-layer configuration with yellow phosphor YAG:Ce3+ under green phosphor YPO4:Ce3+,Tb3+ or red phosphor LiLaO2:Eu3+. After that, we search for suitable concentration of LiLaO2:Eu3+ for addition in order to acquire the finest color quality. The result shows that WLED with LiLaO2:Eu3+ has better CRI and CQS as the higher the concentration of LiLaO2:Eu3+, the larger CRI and CQS due to increased light scattered in WLEDs. Meanwhile, the green phosphor layer YPO4:Ce3+,Tb3+ give advantages to luminous flux. However, the reduction in luminous flux and color quality occurs when the concentration of LiLaO2:Eu3+ and YPO4:Ce3+,Tb3+ over increase. Results are verified by Mie theory and Beer’s Law and can be applied to practical manufacturing of high quality WLEDs.
Co-Authors Anh Tuan Le Anh-Minh D. Tran Hai Minh Nguyen Tran Hoang Van Ngoc Huu Phuc Dang Le Van Tho My Hanh Nguyen Thi My Hanh Nguyen Thi Nguyen Doan Quoc Anh Nguyen Doan Quoc Anh Nguyen Doan Quoc Anh Nguyen Thi Kim Chung Phan Xuan Le Phan Xuan Le Phung Ton That Sang Dang Ho Thanh Tung Nguyen Thinh Cong Tran Thinh Cong Tran Thuc Minh Bui Tri-Vien Vu Van Liem Bui Van Liem Bui