Sang Dang Ho
Ton Duc Thang University

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Applying calcium fluoride and silica particles: A solution to improve color homogeneity of pc-WLEDS Huu Phuc Dang; Nguyen Thi Phuong Loan; Thanh Tung Nguyen; Sang Dang Ho
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i5.pp3864-3869

Abstract

This article focuses on enhancing the lighting efficiency of pc-WLEDs, a new and advanced lighting solution that has received lots of attention. To adapt to the demand of modern lighting, the lighting performance of pc-WLEDs must be improved, especially the color homogeneity and luminous flux, two of the most important quality indicators of pc-WLEDs. Through experiments, this article proposes using the scattering enhancement particles (SEPs) such as CaF2 and SiO2 with yellow phosphor Y3Al5O12:Ce3+ in pc-WLEDs configuration. The pc-WLEDs model is created by using the LightTools program and set at 8500 K correlated color temperature, while the experimental results yielded from this simulation will be verified by Mie-scattering theory. The information from this article reveals the scattering coefficients of SEPs at 455 nm and 595 nm wavelengths. Moreover, it is confirmed that the employment of CaF2 is effective in promoting the color but may damage the luminous efficiency if the concentration is too high while the SEP material, SiO2, exhibits high luminous efficiency at all concentration.
An Improved Current-Sensorless Method for Induction Motor Drives Applying Hysteresis Current Controller Cuong Dinh Tran; Pavel Brandstetter; Minh Huu Chau Nguyen; Sang Dang Ho; Phuong Nhat Pham; Bach Hoang Dinh
Indonesian Journal of Electrical Engineering and Informatics (IJEEI) Vol 9, No 1: March 2021
Publisher : IAES Indonesian Section

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52549/ijeei.v9i1.1619

Abstract

A novel strategy based on the feed-forward field-oriented control (FOC) method is proposed for the Hysteresis Current technique to control the induction motor (IM) drive without current sensors (CSs). A control scheme is proposed to estimate stator currents from reference rotor flux, rotor flux angle, and state variables as a replacement for the feedback-signal of CSs used in the hysteresis current controller (HCC). Here the rotor flux angle component is extracted from the feed-forward FOC loop. MATLAB/Simulink is applied to implement the simulations under many different operating conditions. The simulation results demonstrated the feasibility of the proposed method to obtain high performance in controlling the IM drives without the current sensors.