Garuda - Garba Rujukan Digital

The application of double-layer remote phosphor structures in increasing WLEDs color rendering index and lumen output Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
International Journal of Electrical and Computer Engineering (IJECE) Vol 10, No 5: October 2020
Publisher : Institute of Advanced Engineering and Science

The remote phosphor structure often has inferior color quality but better luminous flux in than conformal or in-cup configurations. Therefore, numerous researches study remote phosphor structure for methods to enhance it chromatic quality. This study introduces the use of dual-layer remote phosphor structure in WLEDs with identical structure but at different color temperature, 6600K and 7700K, to demonstrate their effect on quality indicators. The concept is placing a green phosphor layer (Ce,Tb)MgAl11O19:Ce:Tb or a red phosphor layer MgSr3Si2O8:Eu2+,Mn2+ on the layer of yellow-emitting phosphor YAG:Ce3+ and find the suitable concentration of the additional phosphor to create the best color quality. The results showed that the increase of CRI and CQS are affected by MgSr3Si2O8:Eu2+,Mn2+, in particular, the higher the concentration of red phosphor gets the better CRI and CQS because the emitted red light in enhanced. The green phosphor layer (Ce,Tb)MgAl11O19:Ce:Tb, on the other hand, is beneficial for the luminous flux. The concentration of MgSr3Si2O8:Eu2+,Mn2+ and (Ce,Tb)MgAl11O19:Ce:Tb, however, need to be adjusted properly to avoid decreasing the luminous flux due to overgrowth. The Mie scattering theory and Beer’s law are the verification tools for these conclusions, which gives them the credibility to be applied in producing better quality WLEDs.

The effectiveness of MgCeAl11O19:Tb3+ phosphor in enhancing the luminous efficacy and color quality of multi-chip white LEDs Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
International Journal of Electrical and Computer Engineering (IJECE) Vol 10, No 5: October 2020
Publisher : Institute of Advanced Engineering and Science

In this research paper, we introduced yellow-green MgCeAl11O19:Tb3+ asa new phosphor ingredient to adapt to the quality requirements onthe chromatic homogeneity and emitted luminous flux of modern multi-chip white LED lights (MCW-LEDs). The results from experiments and simulation show that employing MgCeAl11O19:Tb3+ phosphor can lead to much better optical properties and therefore is a perfect supporting material to achieve the goals of the research. When the MgCeAl11O19:Tb3+ phosphor is added into the phosphorus composite which already contains YAG: Ce3+ particles, and the silicone glue, it affects the optical properties significantly. In other words, the concentration of this phosphor can determine the efficiency of lumen output and chromatic homogeneity of WLEDs. In specific, as the concentration of MgCeAl11O19:Tb3+ go up, the luminous yield will increase accordingly, though there is an insignificant decrease in CQS. Moreover, if the MgCeAl11O19:Tb3+ concentration reduce a little bit, it is possible to better the correlated color temperature uniformity and lumen efficacy of LED packages. In addition, the Mie scattering theory, Monte Carlo simulation and LightTools 8.3.2 software are employed to analyze and simulate the LED packages’ structure as well as the phosphor compound.

LaSiO3Cl:Ce3+,Tb3+ and Mg2TiO4:Mn4+: quantum dot phosphors for improving the optical properties of WLEDs Nguyen Thi Phuong Loan; Nguyen Doan Quoc Anh
International Journal of Electrical and Computer Engineering (IJECE) Vol 10, No 5: October 2020
Publisher : Institute of Advanced Engineering and Science

In this research, we focus on the solutions to enhance the lighting properties as well as the heat regulation of the white light-emitting diodes (WLEDs) with conventional phosphor and quantum dots (QDs). Although receiving lots of attention for being an innovative lighting solution with good color rendering index, the potentials of WLEDs conjugated with quantum dots (QDS), especially the QDs-phosphor mixed nanocomposites ones, are restrained due to the lacking performance in the aspects mentioned above. The crucial requirement to produce better WLEDs is finding solutions that improve the lacking aspects, therefore, through observing previous studies and applying advanced technique, this research suggest an effective and unique packaging configuration, in which the nanocomposites QDs-phosphor layer is set horizontally to the WLED. This novel packaging configuration allow WLED performance in terms of lighting and heating to reach it peaks. This is the first time four different types of WLEDs, single-layer phosphor, dual-layer remote phosphor with yellow-red and yellow-green, and triple-layer phosphor, were simulated, utilized and compared in one study to decide the best WLED configuration. The results show that the triple-layer phosphor configurations improve the color rendering ability and lumen output better than the other configurations.

The study of convex-dual-layer remote phosphor geometry in upgrading WLEDs color rendering index Huu Phuc Dang; Nguyen Thi Phuong Loan; Nguyen Thi Kim Chung; Nguyen Doan Quoc Anh
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i5.pp3890-3896

The white-light light-emitting diode (LED) is a semiconductor light source that usually has one chip and one phosphor layer. Because of that simple structure, the color rendering index (CRI) is really poor. Therefore, structure with double layer of phosphor and multiple chips has been studied with the phosphorus proportions and densities in the silicone are constantly changed to find the best option to improve optical properties. In research, we use red phosphor Ca5B2SiO10:Eu3+ layer to place above the yellow phosphor one, and both of them have a convex design. Then, the experiments and measurements are carried out to figure out the effects of this red phosphor as well as the convex-double-layer remote phosphor design on the LED’s performances. The measured results reveal that the light output is enhanced significantly when using convex-dual-layer structure instead of the single-layer design. Additionally, the Ca5B2SiO10:Eu3+ concentration benefits CRI and CQS at around 6600 K and 7700 K correlated color temperature (CCT). Yet, the lumen output shows a slight decline as this red phosphor concentration surpass 26% wt. Through the experiments, it is found that a double layer of chip and double phosphorus is the best structure which could support the quality of CRI and luminous flux.

Dual-layer remote phosphor structure: a novel technique to enhance the color quality scale and luminous flux of WLEDs Phung Ton That; Thuc Minh Bui; Nguyen Thi Phuong Loan; Phan Xuan Le; Nguyen Doan Quoc Anh; Le Van Tho
International Journal of Electrical and Computer Engineering (IJECE) Vol 10, No 4: August 2020
Publisher : Institute of Advanced Engineering and Science

The effects of red light-emitting phosphor CaMgSi2O6:Eu2+,Mn2+ on the optical properties of single-layer remote phosphor structure (SRPS) and dual-layer remote phosphor structure (DRPS) are the focus of this study. The differences in color quality and luminous flux (LF) of white light-emitting diodes (WLEDs) between these two structures are also revealed and demonstrated based on the Mie theory. SRPS consists of one mixed phosphor layer betweenCaMgSi2O6:Eu2+,Mn2+ andYAG:Ce3+particles, while DRPS includes two separated layers: red phosphor layer and yellow phosphor layer. In this work, 5% SiO2 is added into the phosphor layers to increase scattering abilities. Discrepancies in structures greatly affect the optical characteristics of WLEDs. The results showed that the color rendering index (CRI) increased with the concentration in both structures with nearly equal values. Meanwhile, color quality scale (CQS) of DPRS is 74 at ACCTs ranging from 5600K to 8500K, higher than CQS of SRPS which is only 71 at 8500K. In addition, the luminous flux of DRPS is significantly higher than SRPS at 2% -14% of CaMgSi2O6:Eu2+,Mn2+. In summary, DRPS is better for color quality and lumen outputin comparison to SRPS and adding the right amount of red phosphor can enhance CQS and LF.

Using CaCO3-doped package to improve correlated color temperature uniformity of white light-emitting diodes My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Thuc Minh Bui; Hoang Van Ngoc
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 6: December 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i6.pp4817-4824

The white light-emitting diode (WLED) has been the most advance lighting method currently, however, the fabrication process of this configuration still has drawbacks which negatively affect its color quality. This research was conducted to provide a method for WLED’s lighting output enhancement. Since CaCO3 particles are excellent for thermal stability enhancement, especially when being combined with an adhesive substance, we decided to integrate CO3 particles into resin matrix such as melamine formaldehyde (MF) and investigate their influences on the optical properties, including color uniformity and lumen output, of the WLED. The results showed that CaCO3 and MF resin are beneficial to the light scattering efficiency, which results in higher luminous flux and chromatic quality for WLED packages. In addition to that, the appropriate amounts of MF resin and CaCO3 for reaching the best lumen efficiency and color quality are figured out at 1% and 10%, respectively. Moreover, another advantage of using MF resin and CaCO3 for fabricating WLEDs is cost effectiveness. Hence, it has turned out that CaCO3 and MF resins can be potential materials for next high-quality WLED generations.

Applying calcium fluoride and silica particles: A solution to improve color homogeneity of pc-WLEDS Huu Phuc Dang; Nguyen Thi Phuong Loan; Thanh Tung Nguyen; Sang Dang Ho
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i5.pp3864-3869

This article focuses on enhancing the lighting efficiency of pc-WLEDs, a new and advanced lighting solution that has received lots of attention. To adapt to the demand of modern lighting, the lighting performance of pc-WLEDs must be improved, especially the color homogeneity and luminous flux, two of the most important quality indicators of pc-WLEDs. Through experiments, this article proposes using the scattering enhancement particles (SEPs) such as CaF2 and SiO2 with yellow phosphor Y3Al5O12:Ce3+ in pc-WLEDs configuration. The pc-WLEDs model is created by using the LightTools program and set at 8500 K correlated color temperature, while the experimental results yielded from this simulation will be verified by Mie-scattering theory. The information from this article reveals the scattering coefficients of SEPs at 455 nm and 595 nm wavelengths. Moreover, it is confirmed that the employment of CaF2 is effective in promoting the color but may damage the luminous efficiency if the concentration is too high while the SEP material, SiO2, exhibits high luminous efficiency at all concentration.

The effect green YF3:ER3+,YB3+ phosphor on luminous flux and color quality of multi-chip white light-emitting diodes My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Thuc Minh Bui; Anh Tuan Le
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 6: December 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i6.pp4810-4816

The purpose of this paper is to demonstrate the advantages of the green phosphor YF3:Er3+,Yb3+ combined with multi-chip package to the enhancement of lighting efficiency of modern WLEDs. In an effort to improve the quality of WLEDs and create a new generation of lighting device, green phosphor YF3:Er3+,Yb3+ is added into the phosphor compounding of the WLED package to improve the color quality and lighting capacity. Through experiments, WLEDs with YF3:Er3+,Yb3+ green phosphor has shown improved results in lighting performance specifically in color homogeneity and light output of WLEDs in the ACCT range from 5600-7000 K. However, the color quality scale (CQS) declines gradually. Therefore, if the appropriate concentration and size of YF3:Er3+,Yb3+ are determined, the performance of MCW-LEDs will be enhanced and become more stable.

Enhancing light scattering effect of white LEDs with ZnO nanostructures My Hanh Nguyen Thi; Nguyen Thi Phuong Loan; Hoang Van Ngoc
International Journal of Electrical and Computer Engineering (IJECE) Vol 11, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v11i5.pp3838-3843

Pc-LEDs, the lighting method that blends blue LED light with yellow light from phosphor to discharge white radiation, is one of the most advance known for high lumen output. However, pc-LEDs has inferior due to angular CCT deviation, which prevent pc-LEDs from reaching better performance. As a result, this research is conducted to address the need of pc-LEDs development by introducing a configuration doped with ZnO nanoparticles. The finite-difference time-domain (FDTD) method and the phosphor layer containing ZnO were applied in the experiments. The effect of ZnO-filled on the performance of color quality pc-LEDs is confirmed through calculated results. In particular, the uniformity of scattered light is improved with the presence of ZnO. In addition, ZnO particles also minimize the deviation of color temperature and enhance the color quality. Although there is a small decline in lumen output to achieve better color temperature uniformity, however, with suitable concentrations such as 0.25% N-ZnO, 0.25% S-ZnO, and 0. 75% R-ZnO, the decline is acceptable. The research on ZnO pc-LEDs demonstrates that this affordable and simple configuration can improve lighting properties and create other directions to enhance white light

Enhancing the CRI and lumen output for the 6600 K WLED with convex-dual-layer remote phosphor geometry by applying red-emitting MGSR3SI2O8:EU2+,MN2+ phosphor Thuc Minh Bui; Nguyen Thi Phuong Loan; Phan Xuan Le; Nguyen Doan Quoc Anh; Anh Tuan Le; Le Van Tho
International Journal of Electrical and Computer Engineering (IJECE) Vol 10, No 4: August 2020
Publisher : Institute of Advanced Engineering and Science

The traditional white LED product established with a single chip and a single phosphor results in a low color rendering index (CRI). The upgrade of LED package is comprised of two chips and one phosphor material and gives the higher CRI while keeping high luminous efficiency. Based on previous findings, the research paper performs the application of the two chips and two phosphors to enhance the color tunability of LEDs with different amounts and intensities of the two employed phosphors. Additionally, a color design model is built to serve the purpose of bettering the color fine-tuning of the white-light LED module. The maximum value of the difference between the measured CIE 1931 color coordinates and that of the simulated model is approximately 0.0063 around the 6600 K correlated color temperature (CCT). From the results, this study offers a quick approach to achieve the color fine tuning of a white-light LED module with a high CRI and luminous efficiency.

Title

Found 31 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 31 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 31 Documents
Search