Claim Missing Document
Check
Articles

Found 13 Documents
Search

Design and Build Low-Cost Power Hammer Machine Based on Throttle Stomp Agus Sifa; Tito Endramawan; Dedi Suwandi; Ibnu Farhan; Rivay Febrio Maulana
invotek Vol 22 No 3 (2022): INVOTEK: Jurnal Inovasi Vokasional dan Teknologi
Publisher : Universitas Negeri Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24036/invotek.v22i3.1065

Abstract

Metal forming uses plastic deformation to change the shape of the workpiece. Deformation or change in shape results from the use of a tool which is usually called a die. The die provides stresses that exceed the yield strength of the material (plastic). The forging process is one of several types of metal forming. A power hammer machine is a machine used for the formation of a product in the manufacturing process, namely with a system of continuous forging/pressure on the specimen so that the deformed specimen becomes denser and stronger according to the desired shape. The forging process is superior to other processes such as casting and machining. The effectiveness of the forging process is characterized by low costs, high productivity, and high product quality. The cold forging process needs to be improved to reduce the occurrence of fine cracks and defects. The main factor is the quality of forging results by planning the design and production of the right die, improving product quality, and reducing the number of defective products to encourage industrial competitiveness. The method in this research is the process of making the design and calculation of the main components and making the power hammer machine. The results of the design and manufacture of the power hammer machine obtained that the impact force from the design was 58.3 Kg, the rotation of the drive shaft to drive the hammer was 206.5 Rpm, the diameter of the driving shaft was 12.36 mm with the one made of 16 mm, the torque on the driving motor was 77.9 Nm, the minimum power designed is 2.2 hp with a rotation of 2800 Rpm, and is selected for the manufacture of 3 Hp, the electrical system is on / off using a throttle stomp.
PENGARUH ARUS DAN WAKTU PADA MICRO RESISTANCE SPOT WELDING TERHADAP BAJA AISI 304 DAN ALUMINIUM PADUAN Agus Sifa; Mohamad Adib Ichwan; Tito Endramawan
Jurnal Rekayasa Mesin Vol. 14 No. 1 (2023)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v14i1.1100

Abstract

Welding is often used in industry as a joining technique, one of which is Micro Resistance Spot Welding (MRSW). MRSW was carried out to know the maximum load and shear stress produced on separate worksheets using AISI 304 and aluminum alloys and then connected using a lap joint. This study uses weld current, weld time, and emphasis on the electrodes. In this, welding is done constantly and does not use cooling. The currents used in welding are 140, 280, and 420 A, then varied with the welding time of 24 ms, 34 ms, and 44 ms and combined with a pressure of 1.3 bar. After welding, the welding results are tested using tensile tests and weldability tests. The results of the study were taken with the highest maximum load on a differentiated worksheet. The highest maximum load is generated at the connection of AISI 304 with AISI 304. In contrast to the connection using aluminum alloys, the resulting load will decrease.
Mechanical performance of SLA-printed BCC, FCC, and hexagon lattice structures under various layer thicknesses and post-curing times Candra Irawan; Agus Sifa; Tito Endramawan; Dedi Suwandi; Muhammad Luthfi; Emin Haris; Ahmad Farhan; Claudha Alba Pradhana
Jurnal Polimesin Vol 24, No 5 (2026): October
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v24i5.9936

Abstract

The mechanical performance of stereolithography (SLA)-printed lattice structures is governed by both unit-cell topology and processing parameters. However, previous studies have largely examined lattice topology and SLA processing parameters separately, with limited systematic investigation of their combined effects on manufacturing quality, mechanical performance, and structural efficiency within a unified experimental framework. This study experimentally evaluated three lattice topologies, namely Body-Centered Cubic (BCC), Face-Centered Cubic (FCC), and Hexagonal, combined with layer thicknesses of 0.05, 0.10, and 0.15 mm and post-curing times of 40, 50, and 60 min. Five specimens were tested for each of the nine Taguchi L9 experimental conditions (n = 5), and the responses were analysed using the Signal-to-Noise (S/N) ratio and Analysis of Variance (ANOVA). Manufacturing quality was evaluated from dimensional accuracy and mass, while mechanical performance was assessed through Shore D hardness and tensile, compressive, and flexural tests. Structural efficiency was evaluated using Mass Reduction (MR), Mechanical Performance Retention (MPR), Specific Mechanical Performance (SMP), and Mechanical Performance per Apparent Volume (MPV). The BCC topology exhibited the highest dimensional accuracy, with a strut diameter deviation of 0.60%, whereas Hexagon showed the largest deviation of 7.60%. Layer thickness was the dominant factor affecting hardness, contributing 97.8% of the variation, while lattice topology dominated tensile, compressive, and flexural strength, with contributions of 89.7%, 91.6%, and 55.8%, respectively. FCC provided the highest MPR, SMP, and MPV values, whereas Hexagon achieved the highest mass reduction of 26.50%. Within the investigated parameter ranges, FCC with a 0.05 mm layer thickness and 40–50 min post-curing provided the most favorable overall performance. These results demonstrate that integrating lattice topology, SLA processing parameters, mechanical performance, and structural efficiency provides a comprehensive basis for selecting lightweight lattice configurations.