Claim Missing Document
Check
Articles

Found 12 Documents
Search

STUDI PENGARUH PERUBAHAN KONDISI LINGKUNGAN TAPAK TERHADAP HARGA LISTRIK DAN AIR PADA SISTEM DESALINASI DENGAN SUMBER ENERGI NUKLIR DAN FOSIL Moch. Djoko Birmano; Suparman Suparman
Jurnal Pengembangan Energi Nuklir Vol 5, No 2 (2003): Desember 2003
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2003.5.2.1923

Abstract

ABSTRAK STUDI PENGARUH PERUBAHAN KONDISI LINGKUNGAN TAPAK TERHADAP HARGA LISTRIK DAN AIR PADA SISTEM DESALINASI DENGAN SUMBER ENERGI NUKLIR DAN FOSIL. Studi ini bertujuan untuk mengetahui pengaruh perubahan kondisi lingkungan tapak; yaitu salinitas, suhu air laut dan suhu udara lingkungan terhadap harga listrik dan air, serta dapat menentukan jenis pembangkit dan teknologi desalinasi yang paling optimal ditinjau dari aspek teknis dan ekonomi sesuai dengan karakteristik tapak yang diinginkan. Sebagai sumber energi adalah PLTU-Batubara, Daur Gabung, Turbin Gas dan PLTN SMART. Untuk jenis teknologi desalinasi dipilih jenis MSF, MED dan RO. Perhitungan harga listrik dan air menggunakan tools dari IAEA yaitu DEEP 2.1. Dari hasil perhitungan menunjukkan bahwa salinitas air laut hanya berpengaruh terhadap harga air dan tidak berpengaruh terhadap harga listrik. Untuk PLTU-Batubara, Daur Gabung dan PLTN SMART yang dikopling dengan MED, MSF dan RO, peningkatan suhu air laut akan meningkatkan harga listrik dan menurunkan harga air. Untuk PLTU-Batubara dan SMART yang dikopling dengan semua jenis desalinasi, harga listrik dan air tidak terpengaruh dengan adanya perubahan suhu udara. Sedangkan pada Daur Gabung dan Turbin Gas, harga listrik dan air meningkat dengan kenaikan suhu udara.   ABSTRACT STUDY ON ANALYSIS OF INFLUENCE OF SITE ENVIRONMENTAL CONDITIONS ALTERATION TO ELECTRICITY AND WATER PRICES IN DESALINATION SYSTEM WITH NUCLEAR AND FOSSIL ENERGY SOURCES. This study have purpose to know the alteration effect of site environmental conditions which are salinity, seawater temperature and ambient temperature towards electricity and water costs, as well as can determine best power plant and desalination technology type viewed from technical and economical aspects with suitable of site characteristic. The energy sources are Coal- Fired Power Plant (CFPP), Combined Cycle (CC), Gas Turbine (GT) and SMART (System-integrated Modular Advanced ReacTor). Type of desalination technologies are choosed MED (Multi-Effect Distillation), MSF (Multi-Stage Flash) dan RO (Reverse Osmosis). The calculation of electricity and water costs are used DEEP 2.1 (Desalination Economic Evaluation Program) from IAEA (International Atomic Energy Agency). Results of calculation show that seawater salinity only influence towards water cost and not influence towards electricity cost. For CFPP, CC and SMART which coupled with MED, MSF and RO, increase of seawater temperature will raise electricity cost and decrease water cost. For CFPP and SMART that coupled with all types of desalination plant, electricity and water cost are not influenced by alteration of ambient temperature. Whereas for CC and GT which coupled with all types of desalination plant, electricity and water costs will increase by increasing the ambient temperature.
PERHITUNGAN ONGKOS BAHAN BAKAR NUKLIR DAUR TERBUKA DAN TERTUTUP MENGGUNAKAN METODE LEGECOST Moch. Djoko Birmano
Jurnal Pengembangan Energi Nuklir Vol 4, No 1 (2002): Juni 2002
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2002.4.1.2039

Abstract

ABSTRAK PERHITUNGAN ONGKOS BAHAN BAKAR NUKLIR DAUR TERBUKA DAN TERTUTUP MENGGUNAKAN METODE LEGECOST. Disajikan hasil perhitungan ongkos bahan bakar nuklir daur terbuka dan tertutup untuk PLTN jenis LWR (Light Water Reactor) dengan daya netto 600 MWe. Perhitungan ini menggunakan metode LEGECOST (LEvelized GEneration COST) yang dikembangkan IAEA yang mempunyai ciri-ciri, yaitu uang dinyatakan dalam nilai tetap (tanpa inflasi), laju diskon (discount rate) disamakan dengan suku bunga pinjaman (interest rate) dan belum memperhitungkan pajak dan depresiasi. Sebagai kesimpulan adalah bahwa ongkos bahan bakar nukiir daur terbuka lebih menguntungkan karena lebih murah jika dibandingkan dengan ongkos bahan bakar nuklir daur tertutup. Hal ini disebabkan proses olah ulang untuk saat ini kurang menguntungkan karena belum ditemukan cara yang lebih efisien dan murah, disamping itu harga uranium segar masih murah. Pada masa mendatang ongkos bahan bakar daur tertutup akan lebih kompetitif terhadap ongkos bahan bakar daur terbuka apabila ditemukan teknologi proses olah-ulang yang semakin maju, efisien dan murah. Peningkatan penggunaan plutonium (Pu) untuk bahan bakar reaktor khususnya jenis MOX akan mampu menaikkan harga Pu yang akhimya akan menurunkan ongkos bahan bakar daur tertutup. ABSTRACT CALCULATION OF RECYCLE AND OPEN CYCLE NUCLEAR FUEL COST USING LEGECOST METHOD. To be presented the calculation of recycle and open cycle nuclear fuel cost for LWR type that have net power of 600 MWe. This calculation using LEGECOST method developed by IAEA which have characteristics, where i.e. money is stated in constant money (no inflation), discount rate is equalized with interest rate and not consider tax and depreciation. As a conclusion is that open cycle nuclear fuel cost more advantage because it is cheaper than recycle nuclear fuel cost. This is caused that at present, reprocessing process disadvantage because it has not found yet more efficient and cheaper method, besides price of fresh uranium is still cheap. In future, the cost of recycle nuclear fuel cycle will be more competitive towards the cost of open nuclear fuel cycle if is found technology of reprocessing process that more advance, efficient and cheap. Increase of Pu use for reactor fuel especially MOX type will rise Pu price that finally will decrease the cost of recycle nuclear fuel cycle.
ASPEK BAHAN BAKAR DALAM RENCANA PEMBANGUNAN PABRIK LISTRIK DAN AIR Dl MADURA Moch. Djoko Birmano
Jurnal Pengembangan Energi Nuklir Vol 4, No 2 (2002): Desember 2002
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2002.4.2.2044

Abstract

ABSTRAK ASPEK BAHAN BAKAR DALAM RENCANA PEMBANGUNAN PABRIK LISTRIK DAN AIR DL MADURA. Studi tentang aspek bahan bakar daiam rencana pembangunan pabrik listrik dan air di Madura telah dilakukan. Dalam bidang kelistrikan ada banyak bahan bakar yang dapat digunakan untuk memproduksi listrik. Jenis bahan bakar yang dinominasikan dalam perencanaan pembangunan pabrik listrik dan air di Madura adalah minyak, gas, batubara dan bahan bakar nuklir (BBN). Banyak parameter yang harus dipertimbangkan untuk membangun sebuah pembangkit listrik, diantaranya ketersediaan bahan bakar dan infrastruktur pendukungnya yang akan menjamin pasokan atau penyediaan bahan bakarnya. Makalah ini bertujuan untuk memberikan informasi dan gambaran tentang aspek ketersediaan bahan bakar beserta infrastruktur yang mendukungnya yang akan dapat dipakai sebagai salah satu bahan pertimbangan untuk memilih jenis bahan bakar yang terbaik dalam studi kelayakan pembangunan pabrik listrik dan air di Pulau Madura. Berdasarkan hasil pengumpulan data dan informasi dari berbagai sumber dapat disimpulkan bahwa minyak, gas, batubara dan BBN mempunyai kelebihan dan kekurangan yang spesifik dan berbeda satu sama lain dalam pengadaanya. Untuk memilih bahan bakar yang terbaik masih memerlukan studi yang lebih luas, menyeluruh dan mendalam dari aspek teknologi, ekonomi dan pendanaan.   ABSTRACT THE FUEL ASPECT IN PLANNING OF CONSTRUCTION OF POWER AND WATER PLANTS IN MADURA ISLAND. Study on fuel aspect in planning of construction of power and water plants in Madura Island has been done. In the electricity sector, there are some fuel types that can be used a power plant to produce electricity. Fuel types that nominated in planning of power and water plants in Madura are oil, gas, coal, and nuclear fuel. Many parameters have to be considered to build a power plant such as fuel availability and supporting infrastructure that will secure the continuity of fuel supply. The objective of this paper is to give information and illustration of fuel availability aspects as well as supporting infrastructure that can be used as one of considerations to select best fuel type in the feasibility study of the power and water plant construction in Madura Island. Based on the results of data and informations that have been collected from some sources can be concluded that oil, gas, coal and nuclear have some advantages and disadvantages that spesific and differ between one another in its supply. To select the best fuel type still need study that more wide, comprehensive and deeper viewed from aspects of technology, economy and financing.
IDENTIFIKASI STRATEGI PENDANAAN PEMBANGUNAN PLTN TIPE OPR-1000 DI SEMENANJUNG MURIA Moch. Djoko Birmano
Jurnal Pengembangan Energi Nuklir Vol 9, No 1 (2007): Juni 2007
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2007.9.1.1947

Abstract

ABSTRAK IDENTIFIKASI STRATEGI PENDANAAN PEMBANGUNAN PLTN TIPE OPR- 1000 DI SEMENANJUNG MURIA. Telah dilakukan studi untuk mengidentifikasi strategi pendanaan pembangunan PLTN OPR-1000 di Semenanjung Muria. Studi ini merupakan lanjutan dari studi sebelumnya yang berjudul “Kelayakan Ekonomi dan Pendanaan Pembangunan Proyek PLTN Jenis PWR Tipe OPR-1000 Di Semenanjung Muria". Pada studi sebelumnya telah diketahui kelayakan ekonomi dan pendanaan pembangunan PLTN OPR-1000. Kelayakan ekonomi diketahui dengan diperolehnya biaya pembangkitan, penjualan (tarif) listrik dan biaya pembangunan. Sementara itu, kelayakan pendanaan diketahui dengan diperolehnya Nilai Bersih Sekarang (NPV), Tingkat Pengembalian Modal (IRR) dan Lama Pengembalian Modal (Payback Period, P) yang menggunakan KEPCO Spread Sheet Dari perhitungan kelayakan ekonomi dan pendanaan pada kasus dasar (base case) diperoleh hasil bahwa besarnya tarif listrik, IRR, NPV dan Payback Period keseluruhan investasi adalah masing-masing sebesar 6,640 cent/kWh (setelah ditambah PPn), 10,37%, US$ 90,52 juta dan 12,11 tahun. Dari hasil kelayakan ekonomi dan pendanaan pada kasus dasar ini dilakukan analisis sensitivitas terhadap parameter teknis (Faktor Kapasitas) dan parameter ekonomi (Tingkat Diskonto). Hasil analisis sensitivitas yang diperoleh digunakan untuk identifikasi strategi pendanaan agar mendapatkan hasil kelayakan ekonomi dan pendanaan yang terbaik dan optimal. Kata Kunci: NPV, IRR, Payback Period, OPR-1000   ABSTRACT THE IDENTIFICATION OF FINANCING STRATEGY FOR THE CONSTRUCTION OF NPP TYPE OPR-1000 AT MURIA PENINSULA. The study for identification of financing strategy for the construction of OPR-1000 at Muria Peninsula have been done. This study is continuation of previous study with title “The Economic and Financing Viability of the OPR-1000 Construction at Muria Peninsula". In the previous study have been the economic and financing viability of OPR-1000 construction. The economic viability was known by obtained the generation cost, electricity tariff and construction cost. The meanwhile, the financing viability was known by obtained Net Present Value (NPV), Internal Rate of Return (IRR) and Payback Period (P) by using KEPCO Spread Sheet. From the calculation of economic and financing viability in base case, have been obtained the result of electricity tariff, IRR, FNPV and Payback Period for total investment is 6.640 cenf/kWh (after Value Added Tax), 10.37%, US$ 90.52 million and 12.11 years, respectively. From this result of economic and financing viability in base case, have been carried out sensitivity analysis to technical parameter (capacity factor) and economic parameter (discount rate). The result of sensitivity analysis to be used for identifying financing strategy in order to obtain the best and optimal economic and financing viability.
PEMETAAN DAN PENYIAPAN SDM TAHAP PENGOPERASIAN DAN PERAWATAN PLTN DI INDONESIA Moch. Djoko Birmano; Yohanes Dwi Anggoro
Jurnal Pengembangan Energi Nuklir Vol 15, No 2 (2013): Desember 2013
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2013.15.2.1495

Abstract

ABSTRAKPEMETAAN DAN PENYIAPAN SDM TAHAP PENGOPERASIAN DAN PERAWATAN PLTN DI INDONESIA. Penyiapan sumber daya manusia (SDM) yang kompeten merupakan salah satu infrastruktur dasar pembangunan PLTN. IAEA merekomendasikan bahwa pada kegiatan awal penyiapan SDM PLTN adalah melakukan Pemetaan Proses Bisnis (Business Process Mapping) dengan mengidentifikasi pengetahuan, keterampilan dan kemampuan SDM yang dibutuhkan untuk melaksanakan operasi dan perawatan PLTN. Tujuan studi adalah memetakan dan menyiapkan SDM di BATAN untuk tahap pengoperasian dan perawatan PLTN di Indonesia. Metode yang digunakan adalah memetakan proses bisnis pada tahap pengoperasian dan perawatan PLTN, melakukan identifikasi jabatan, melakukan survei dengan kuesioner dan perhitungan, dan analisis data. Survei dan pengisian kuesioner untuk mengetahui tingkat kompetensi teknis personil di BATAN pada tahap pengoperasian dan perawatan PLTN. Analisis menggunakan Metode Analisis Kesenjangan (Gap Analysis Methods) dengan Kriteria Standar Kompetensi SDM yang didasarkan pada kualifikasi kompetensi teknis. Studi ini menggunakan asumsi bahwa PLTN yang akan dibangun sebanyak 2 unit (twin) dan mulai beroperasi pada tahun 2027. Hasil penelitian menunjukkan bahwa dari aspek pendidikan, BATAN mampu memenuhi kebutuhan SDM sebesar 53,64 % hingga 73,75 %. Sedangkan dari aspek pelatihan dan pengalaman kerja khusus, tingkat partisipasi SDM BATAN masih sangat rendah dari yang dipersyaratkan oleh IAEA. Hal ini diakibatkan SDM muda di BATAN yang memiliki kualifikasi pendidikan, pengalaman, pelatihan dan sertifikasi teknis di bidang operasi dan perawatan PLTN masih terbatas. Berdasarkan hal ini, perlu adanya penyiapan SDM PLTN dengan menyusun program kegiatan pengembangan SDM PLTN berdasarkan kualifikasi yang dipersyaratkan. Kata Kunci: SDM, PLTN, analisis kesenjangan ABSTRACTTHE MAPPING AND PREPARATION OF HUMAN RESOURCES FOR NPP’S OPERATION AND MAINTENANCE IN INDONESIA. The preparation of the competent human resources (HRs) is one of the basic infrastructure of NPP’s development. IAEA recommends that at the initial activity in preparation of human resources for NPP is doing Business Process Mapping by identifying the knowledge, skills and abilities of required human resources to carry out the operation and maintenance of NPPs. This study aims to mapping and preparing of human resources for NPP’s operation and maintenance in Indonesia. The method used are mapping business processes at operation and maintenance stage of NPP, identifying positions, conducting surveys with questionnaires and calculations, and data analysis. Surveys and questionnaires to determine the level of technical competence of personnel in BATAN at operation and maintenance stage. Analysis using the Method of Gap Analysis with human resources Competency Standards Criteria based on technical competence qualifications. This study uses the assumption that the nuclear power plant will be built 2 units (twin) and start operation in 2027. The results showed that from the aspect of education, BATAN able to meet the needs of human resources at 53.64 to 73.75%. While from the aspect of training and specific work experience, participation level of BATAN’s human resources is still very low of IAEA requirements. This case caused because young human resources in BATAN who have educational qualifications, experience, training and technical certifications in the field of operation and maintenance of nuclear power plants is still limited. Based on this, there should be preparation of NPP’s human resources with establish NPP’s human resources development program based on required qualifications.Keywords: Human resources, NPP, gap analysis
PERHITUNGAN EKONOMI DAN PENDANAAN PLTN DAN PEMBANGKIT KONVENSIONAL MENGGUNAKAN SPREADSHEET INOVASI Moch. Djoko Birmano; Imam Bastori
Jurnal Pengembangan Energi Nuklir Vol 10, No 2 (2008): Desember 2008
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2008.10.2.1421

Abstract

ABSTRAKPERHITUNGAN EKONOMI DAN PENDANAAN PLTN DAN PEMBANGKIT KONVENSIONAL MENGGUNAKAN SPREADSHEET INOVASI. Telah dilakukan studi perhitungan ekonomi dan pendanaan PLTN dan pembangkit konvensional dengan menggunakan Spreadsheet INOVASI. Sebagai studi kasus dipilih PLTN tipe PWR kelas 1050 MW, yaitu OPR1000 (Optimized Power Reactor, 1000MWe) dan pembangkit listrik konvensional klas 600 MW, yaitu PLTU Batubara. Studi ini bertujuan untuk mengetahui tingkat kelayakan ekonomi dan pendanaan OPR1000 dan PLTU Batubara menggunakan Speadsheet INOVASI. Dari hasil studi dapat disimpulkan bahwa secara ekonomi, PLTN OPR-1000 lebih layak dibandingkan dengan PLTU Batubara karena ongkos pembangkitannya lebih murah. Sementara itu secara finansial, PLTN OPR-1000 lebih menguntungkan dibanding PLTU Batubara karena keuntungan di akhir umur ekonomi (Net Present Value, NPV) lebih besar dan perbandingan antara keuntungan dan ongkos (B/C Ratio) lebih tinggi. Untuk PLTN dan PLTU Batubara, semakin tinggi Tingkat Diskonto (Discount Rate) (%) semakin tidak menguntungkan. PLTN lebih peka/sensitif terhadap perubahan nilai Tingkat Diskonto daripada PLTU Batubara. Sementara itu, PLTU batubara lebih peka/sensitif terhadap perubahan nilai Harga Jual Listrik daripada PLTN.Kata kunci: spreadsheet INOVASI, kelayakan, ekonomi dan pendanaan ABSTRACTCALCULATION OF ECONOMIC AND FINANCING OF NPP AND CONVENTIONAL POWER PLANT USING SPREADSHEET INOVASION. The study for calculating the economic and financing of Nuclear Power Plant (NPP) and conventional power plant using spreadsheet INOVATION has been done. As case study, the NPP of PWR type of class 1050 MWe is represented by OPR1000 (Optimized Power Reactor, 1000MWe) and the conventional plant of class 600 MWe, is coal power plant (Coal PP). The purpose of the study is to assess the economic and financial feasibility level of OPR-1000 and Coal PP. The study result concludes that economically, OPR-1000 is more feasible compared to Coal PP because its generation cost is cheaper. Whereas financially, OPR-1000 is more beneficial compared to Coal PP because the higher benefit at the end of economic lifetime (NPV) and the higher ratio of benefit and cost (B/C Ratio). For NPP and Coal PP, the higher Discount Rate (%) is not beneficial. NPP is more sensitive to the change of discount rate compared to coal PP, whereas Coal PP is more sensitive to the change of power purchasing price than NPP.Keywords: spreadsheet INOVASION, feasibility, economic and financial
STUDI SUMBER DAYA MANUSIA TERHADAP INDUTRIALISASI DI MADURA Aziz Jakfar; Mochamad Nasrullah; Sriyana Sriyana; Moch. Djoko Birmano
Jurnal Pengembangan Energi Nuklir Vol 9, No 2 (2007): Desember 2007
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2007.9.2.1961

Abstract

ABSTRAK STUDI SUMBER DAYA MANUSIA TERHADAP INDUTRIALISASI DI MADURA. Tujuan dari penelitian adalah memperoleh gambaran yang komprehensif mengenai kesiapan SDM terhadap industrialisasi di Madura dengan : 1). Menentukan arah pengembangan industrialisasi; 2).Mengidentifikasi faktor pendukung dan kendala; 3).Mengidentifikasi alternatif solusi; 4).Menentukan analisis kapasitas SDM dengan Indeks Pembangunan Manusia (IPM) atau Human Development Index (HDI); 5).Mengidentifikasi strategi pengembangan ketenagakerjaan; 6).Mengidentifikasi peran pendidikan dalam pengembangan SDM; 7).Merumuskan agenda pengembangan SDM. Arah dari pengembangan kawasan industrialisasi di Madura adalah memberikan iklim kondusif bagi investor untuk mengoptimalkan industri berbasis potensi dan perluasan/ekspansi industri dari daerah lain. Faktor pendukung skenario industrialisasi di Madura : Jembatan Suramadu, perluasan Gerbang Kertosusiia menjadi Germa Kertosusila dan tersedianya sarana dan prasarana. Faktor kendalanya : rendahnya persepsi masyarakat terhadap pentingnya industrialisasi dan adanya keterbatasan pasokan energi listrik dan air. Alternatif solusi terhadap faktor kendala : sosialisasi pentingnya industrialisasi bagi kemajuan Madura oleh semua komponen stake holders. Sedangkan, keterbatasan pasokan energi listrik dan air bersih di masa mendatang dapat dipertimbangkan alternatif PLTN Desalinasi. Pembangunan kapasitas SDM di Madura masih belum layak dan jauh di bawah rata-rata di Jawa Timur, ditandai dengan rendahnya nilai rataan di Madura. Namun demikian, secara ekonomi sebenarnya sudah baik ditandai dengan nilai daya beli (IDB) diatas rataan jawa Timur. Strategi kebijakan pengembangan ketenagakerjaan yang dapat dilakukan adalah :1). Meningkatkan aksesibilitas untuk memperlancar aliran investasi dan produksi dan menciptakan keterkaitan ekonomi; 2).Mendorong pemanfaatan potensi SDA yang belum tergali; 3). Meningkatkan kelangsungan usaha yang sudah ada; 4). Meningkatkan kemampuan pemerintah daerah untuk menarik investor berdasar keunggulan komparatif dan kompetitif; 5). Meningkatkan kapasitas SDM daerah yang lebih profesional. Kata kunci: sumberdaya manusia (SDM), industrialisasi, PLTN-Desalinasi, tenaga kerja, pendidikan.   ABSTRACT THE STUDY ON HUMAN RESOURCES TOWARD INDUSTRIALIZATION IN MADURA. This research aims at arriving at rich description about human resources’ readiness toward industrialization by 1) determining the direction of industrialization development, 2) discovering supporting as well as interfering factors, 3) identifying alternative solution to the problems, 3) analyzing human resources capacity in terms of Human Development Index, 5) recognizing labor development strategy, 6) noticing the role of education in developing human resources, 7) formulating human resources development agenda. The goal of industrialization development in Madura region is to create such conducive circumstances for the investors that it is likely to trigger optimal industries with its potency and expansion based. Some supporting factors associated with the industrial development scenario in Madura are Suramadu bridge, the expansion of Gerbang Kertosusila into Germa Kertosusila and the availability of facilities and infrastructure. In addition, there are some interfering factors to be considered such as low perception of the local community on the importance of industrialization as well as the shortage of electricity and water intake. The alternative solutions to the obstacles above are to promote socialization program on the importance of industrialization for the advancement of Madura region by all related stakeholders while considering the use of PLTN desalination over water and electricity problems.mHowever, human resources development capacity of Maduresse, whose average capacity is considered both improper and far below the average capacity of the whole population in East Java. Nevertheless, Maduresse relatively has already attained sufficient purchasing power (nilai daya beli/IDB) which is above the average on East Java population as a whole. Labor development strategy policy can be carried through; 1) improving accessibility to Madura to speed up the flow of outside investment, production as well as business; 2) promoting local labor force; 3) improving the prevailing economics activities; 4) improving local government capacity to attract outside investors based on its comparative and competitive superiority; 5) promoting qualified capacity toward local human resources Keywords: human resources, industrialization, PLTN-Desalination, labor force, education.
RANTAI PASOK INDUSTRI KONSTRUKSI SIPIL UNTUK MENDUKUNG PEMBANGUNAN PLTN DI INDONESIA Dharu Dewi; Sriyana Sriyana; Moch. Djoko Birmano; Sahala Maruli Lumbanraja; Nurlaila Nurlaila
Jurnal Pengembangan Energi Nuklir Vol 15, No 2 (2013): Desember 2013
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2013.15.2.1497

Abstract

ABSTRAKRANTAI PASOK INDUSTRI KONSTRUKSI SIPIL UNTUK MENDUKUNG PEMBANGUNAN PLTN DI INDONESIA. Penggunaan produk dalam negeri untuk pembangunan infrastruktur ketenagalistrikan telah diatur dalam Peraturan Menteri Perindustrian nomor: 54/M-IND/PER/3/2012, tetapi infrastruktur pembangunan pembangkit listrik tenaga nuklir (PLTN) belum tercakup di dalamnya. Oleh karena itu, potensi industri dalam negeri perlu dipetakan khususnya rantai pasok industri konstruksi sipil untuk memperkirakan kemampuan tingkat komponen dalam negeri (TKDN) pada proyek pembangunan PLTN di Indonesia. PLTN merupakan teknologi tinggi sehingga jika PLTN akan dibangun maka perlu melibatkan kemampuan industri nasional sebagai media alih teknologi, terutama untuk jasa EPC (Engineering, Procurement and Construction). Konstruksi sipil (civil part) dalam PLTN memegang peran yang cukup besar, yakni sekitar 21%. Oleh karena itu perlu peran industri nasional khususnya konstruksi sipil untuk meningkatkan kemampuan kandungan lokal. Kesiapan infrastruktur konstruksi sipil sangat bergantung pada rantai pasok bahan baku. Tujuan penelitian adalah memetakan industri konstruksi sipil dan rantai pasok industri konstruksi sipil. Metodologi penelitian ini adalah kajian literatur dan survei data industri nasional. Hasil penelitian diperoleh gambar peta industri konstruksi sipil dengan mata rantai pasok bahan baku.Kata kunci: konstruksi sipil, pembangunan PLTN, rantai pasok ABSTRACTTHE SUPPLY CHAIN OF CIVIL CONSTRUCTION INDUSTRIES FOR SUPPORT THE NUCLEAR POWER PLANT CONSTRUCTION IN INDONESIA. The use of domestic products for electricity infrastructure has been set out in the Ministerial Decree number: 54/M-IND/PER/3/2012, but the infrastructure of nuclear power plants (NPP) construction has not been included. Therefore, the potential of the local industries needs to be mapped it especially supply chain of civil construction industries to estimate the capability of the local component level (DCL) at the nuclear power plant project in Indonesia. NPP is a high-technology so that if NPP will be constructed, it is necessary to involve the national capability as media technology transfer, especially for EPC (Engineering, Procurement and Construction) services. Civil construction (civil part) play role is very large, about 21%. Therefore it is necessary in particular the role of the national civil construction industry to increase the capability of local content. Preparation of Civil construction infrastructure are depend on the supply chain of raw materials. The aim of the research was to map the supply chain of the civil construction industries. Methodology this study is a survey of national industries, literature review, and searching website. The result study is a map of civil construction industries with raw material supply chain.Keywords: civil construction, Nuclear Power Plant, supply chain
KELAYAKAN EKONOMI DAN PENDANAAN PEMBANGUNAN PROYEK PLTN JENIS PWR TIPE OPR-1000 DI SEMENANJUNG MURIA Moch. Djoko Birmano; Mochamad Nasrullah
Jurnal Pengembangan Energi Nuklir Vol 7, No 1 (2005): Juni 2005
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2005.7.1.1935

Abstract

ABSTRAK KELAYAKAN EKONOMI DAN PENDANAAN PEMBANGUNAN PROYEK PLTN JENIS PWR TIPE OPR-1000 DI SEMENANJUNG MURIA. Telah dilakukan studi untuk mengetahui kelayakan ekonomi dan pendanaan pembangunan PLTN OPR-1000 di Semenanjung Muria. Studi ini dilakukan dengan tahapan-tahapan sbb: pemutakhiran data baik teknis maupun ekonomi dari PLTN OPR-1000, survei sumber-sumber pendanaan, mengetahui kelayakan ekonomi (Economic Viability) dengan menghitung biaya pembangkitan listrik (Electricity Generation Cost), menghitung penjualan listrik (Electricity Tariff), biaya pembangunan (Construction Cost) PLTN OPR-1000 dan menghitung kelayakan pendanaan (Financing Viability) pembangunan PLTN OPR-1000 dengan menggunakan kriteria kelayakan yang urnum digunakan (Nilai Bersih Sekarang (NPV), Tingkat Pengembalian Modal (IRR) dan Lama Pengembalian Modal (Payback Period)) dengan menggunakan KEPCO Spread Sheet. Berdasarkan perhitungan didapatkan hasil bahwa ongkos pembangkitan listrik sebesar 4,0866 cent/kWh, sementara harga penjualan (tarif) listrik adalah 6,6399 cent/kWh (setelah dikenai pajak)! Biaya pembangunan PLTN OPR-1000 secara keseluruhan adalah US$ 4.092,09 juta (termasuk interest dan financial fee, tidak termasuk initial nuclear fuel). Dari perhitungari kelayakan pendanaan pada kasus dasar (base case) diperoleh hasil bahwa nilai IRR, NPV dan Payback Period keseluruhan investasi adslah masing-masing sebesar 10,37%, US$ 90,52 juta dan 12,11 tahun. Dari sini dapat disimpulkan bahwa dengan harga jual listrik sebesar 6,640 cent/kWh atau 0,0664 US$/kWh, pada dasarnya proyek pembangunan PLTN OPR-1000 ini sangat layak dan menguntungkan. Dari segi investasi, proyek ini cukup menarik minat investor karena tingkat pengembalian modalnya cukup tinggi, keuntungan pada akhir umur ekonomi cukup besar dan waktu/lama pengembalian modalnya cepat.   ABSTRACT THE ECONOMIC AND FINANCING VIABILITY OF THE OPR-1000 CONSTRUCTION AT MURIA PENINSULA. The study of the economic and financing viability of the OPR-1000 construction at Muria Peninsula have been done. This study is carried out with steps as follows: updating of newest OPR-1000 technical and economic data, survey of financing sources; the calculation of electricity generation cost, electricity tariff, construction cost of OPR-1000; and calculation of OPR-1000 financing viability by using feasibility criteria such as Net Present Value(NPV), Internal Rate of Return (IRR) and capital payback period. The calculation of generation cost, electricity tariff, construction cost and financing viability criteria (IRR, NPV, Payback Period) by using KEPCO Spread Sheet. From the results of calculation show that the electricity generation cost is 4.0866 cent/kWh, while the electricity tariff is 6.6399 cent/kWh (after Value Added Tax) The total construction cost of OPR-1000 is US$ 4,092.09 million (included interest and financial fee, excluded initial nuclear fuel). The calculation of financing viability in base case obtained that value of IRR, NPV and Payback Period for total investment is 10.37%, US$ 90.52 million and 12.11 years respectively. From these results can be concluded that with the electricity tariff of 6.640 cent/kWh or 0.0664 US$/kWh, basically this project of OPR-1000 construction is very feasible and beneficial. From investment side, this project can attract investor because the rate of capital return is high enough, profit in the end of economic life is big enough and payback period is short.
STUDI PRA-KELAYAKAN EKONOMI SISTEM DESALINASI NUKLIR MADURA Moch. Djoko Birmano; Suparman Suparman
Jurnal Pengembangan Energi Nuklir Vol 6, No 1 (2004): Juni 2004
Publisher : Pusat Kajian Sistem Energi Nuklir, Badan Tenaga Nuklir Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17146/jpen.2004.6.1.1926

Abstract

ABSTRAK STUDI PRA-KELAYAKAN EKONOMI SISTEM DESALINASI NUKLIR MADURA. Studi kelayakan perlu dilakukan dalam rencana pembangunan PLTN jenis SMART (System integrated Modular Advanced ReacTor), yang dikopel dengan teknologi desalinasi jenis MED (Multi Effect Distilation) untuk memproduksi air bersih di Puiau Madura. Salah satu bagian penting dari studi kelayakan adalah analisis kelayakan ekonomi dan finansial. Kriteria kelayakan proyek desalinasi nukiir ini dianalisis menggunakan parameter- parameter yang umum digunakan dalam menilai suatu proyek, yaitu Tingkat Pengembalian Modal (FIRR), Niiai Bersih Sekarang (FNPV), dan Waktu/Lama Pengembalian Modal (Payback Period). Dari hasil perhitungan menunjukkan bahwa dengan harga juai listrik sebesar 54,17 mills/kWh, untuk keseluruhan proyek yang didanai oleh pendanaan luar negeri, daiam negeri dan modal sendiri, diperoleh nilai FIRR sebesar 12,73%, nilai FNPV sebesar US$ 75,29 juta dan Payback Period selama 8 tahun. Dengan melihat indikasi keberhasilan proyek maka proyek desalinasi nukiir dapat dikatakan layak dan dari segi investasi menguntungkan karena tingkat pengembaiian modalnya cukup tinggi, keuntungan pada akhir umur ekonomi cukup besar dan waktu pengembalian modalnya cepat.   ABSTRACT THE ECONOMIC PRE-FEASIBILITY STUDY OF MADURA NUCLEAR DESALINATION SYSTEM. The feasibility study is needed in the planning of construction of NPP's SMART type coupled with desalination technology of MED type to produce clean water in Madura Island. One important part of the feasibility study is the economical and financial analysis. The feasibility criteria of nuclear desalination project is analyzed by using the general parameters that is commonly used in evaluating a project, which is Financial Net Present Value (FNPV), Financial Internal Rate of Return (FIRR) and Payback Period. The Calculation result shows that with the electricity selling price of 54.17 mills/KWh, for entirety project funded by the foreign loan, local loan and equity, it could be obtained FIRR 12.73%, FNPV US$ 75.29 million and Payback Period is 8 years. By seeing from the project feasibility criteria, this nuclear desalination project can be feasible and the investation aspect shows that this project is beneficial because the capital return rate is rather high, the benefit in the end of the economic life-time is rather big and the capital payback period is fast.