Claim Missing Document
Check
Articles

Found 3 Documents
Search

PENGKAJIAN KINERJA HIDRAULIK BANGUNAN PELIMPAH BENDUNGAN SANTAN DI KALIMANTAN TIMUR Kumala, Yiniarti Eka
Jurnal Teknik Sipil ITENAS Vol 5, No 1 (2007): APRIL 2007
Publisher : Jurnal Teknik Sipil ITENAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4036.161 KB)

Abstract

Santan dam is designed to be built in Santan river for supply water of Bontang city in East Kalimantan Province. The contruction of Santan dam is intended to anticipate the development of Bontang city in the next twenty years to be an industrial and mining city. The spillway of the dam is designed using side channel spillway provided by straight chute cannel and USBR II Stilling basin. The objectives of the hydraulic design study for the spillway are to evaluate and to achieve the perfect, safe and optimum hydraulic design of the spillway. The study method is conducted by physical hydraulic model investigation in the laboratory. The model is an undistorted model with geometric same both in horizontal and vertical direction, to be selected as 1 to 40. Based on the study results, it is concluded that the hydraulic performance of the original design in less, because there are some eddies unsptream of the crest, some cross waves in the chute channel and the stilling basin doesnot effectively dissipate the energy. In order to perfect the hydraulic design, it is recommended to modify the upstream guide walls, side channel spillway, chute channel and the stilling basin.
Evaluasi Kapasitas Spillway Bendungan Darma sebagai Salah Satu Dasar dari Aspek Keamanan Bendungan (Hal. 31-38) Putra, Gerry Prima; Kumala, Yiniarti Eka
RekaRacana: Jurnal Teknil Sipil Vol 5, No 1: Maret 2019
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (581.79 KB) | DOI: 10.26760/rekaracana.v5i1.31

Abstract

ABSTRAK Kapasitas spillway Bendungan Darma perlu tinjauan kembali mengenai kemampuannya dalam menjaga agar tidak terjadi limpasan karena pada umumnya bendungan yang dibangun dibawah tahun 1980 tidak didesain untuk debit banjir ( ) Probable Maximum Flood (PMF). Dari analisis hidrologi dengan metode Gama 1 untuk penelusuran banjir reservoir didapatkan pada Q1000 yaitu Qinflow = 879,02 m3/s, Qoutflow = 574,44 m3/s dan  adalah Qinflow = 1546,63 m3/s, Qoutflow = 620,74 m3/s. Berdasarkan hasil perhitungannya didapatkan selisih muka air melimpah dan mercu bendungan pada Q1000 adalah 1,83 m dan pada QPMF adalah 0,54 m. Saat terjadi banjir PMF, bendungan mengalami overtopping karena menurut SNI batas maksimal banjir yang boleh terjadi adalah 0,75 di bawah puncak mercu bendungan.Kata kunci:  debit banjir, bendungan, limpasan, Probable Maximum Flood (PMF). ABSTRACTThe capacity of the spillway Dam Darma requires review regarding his ability to keep the spillway did not overflow because in general the dam built under the year 1980 is not in design for flood discharge ( ) the Probable Maximum Flood (PMF). Hydrological analysis method of Gama 1 for search flood reservoir obtained on the Q1000 are Qinflow = 879.02 m3/s, Qoutflow = 574.44 m3/s  and  are Qinflow = 1546.63 m3/s, Qoutflow = 620.74 m3/s. Based on the results of the calculations are obtained by difference advance water overflow and mercu dam on the 1000 is 1.83 m and on QPMF is 0.54 m. At the time of the flood, the dam suffered a PMF overtopping due to flood, according to the maximum limit of the SNI standartmay happen is 0.75 mercu beneath the dam.Keywords: flood discharge, dam, spillway, Probable Maximum Flood (PMF).
KAJIAN PERENCANAAN BENDUNG TAPAN, KABUPATEN PESISIR SELATAN, PROVINSI SUMATRA BARAT Zulherfina, Melvi; Kumala, Yiniarti Eka; Harlan, Dhemi; Natasaputra, Suardi; Yuenza, Alif Kania Jenti
Jurnal Review Pendidikan dan Pengajaran Vol. 8 No. 3 (2025): Volume 8 No. 3 Tahun 2025
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jrpp.v8i3.47471

Abstract

Kabupaten Pesisir Selatan, khususnya kawasan Kumbung memiliki daerah pertanian yang luas tetapi karena kurang memadainya sistem pengairan dan tidak maksimalnya pasokan air ke lahan pertanian mengakibatkan terjadinya penurunan fungsi sawah irigasi. Direncanakan sebuah bangunan air yaitu bendung pada sungai Tapan untuk mengembangkan potensi sungai dan membantu penyediaan air supaya sawah berfungsi secara optimal. Dalam tulisan ini dibahas mengenai perencanaan sebuah bendung dari tahap pemilihan lokasi hingga kebutuhan stabilitas bendung. Terdapat tiga alternatif lokasi dalam perencanaan bendung Tapan ini, dimana alternatif ke dua yang terletak di Limau Purut mendapatkan poin layak terbanyak dari persyaratan yang ada. Berdasarkan hasil perhitungan didapatkan debit rancangan periode ulang 100 tahun sebesar 884,86 m3/s. Bendung inipun direncanakan menggunakan mercu tipe Bulat Satu Radius dan peredam energi tipe MDO. Setelah melakukan perhitungan gaya-gaya yang bekerja pada bendung dan melakukan pengecekan kebutuhan stabilitas bendung, bendung ini sudah memenuhi kebutuhan stabilitas terhadap Guling dan Geser.