Garuda - Garba Rujukan Digital

SISTEM KEAMANAN BRANKAS BERBASIS KARTU RFID E-KTP Ath Thaareq Mahesa; Hendar Rahmawan; Avan Rinharsah; Samsul Arifin
Jurnal Teknologi dan Manajemen Informatika Vol 5, No 1 (2019): Mei 2019
Publisher : Universitas Merdeka Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26905/jtmi.v5i1.3105

Brankas adalah suatu tempat yang disediakan untuk menyimpan suatu benda yang berharga seperti dokumen penting, perhiasan, uang dan barang berharga lainnya. Pada saat ini keamanan brankas masih menggunakan sistem penguncian semi otomatis yaitu dengan menggunakan kunci kombinasi. Penggunaan kunci kombinasi kurang efisien karena pengguna brankas mudah lupa pin dari kunci kombinasi brankas. Kunci kombinasi juga mudah dibobol oleh pencuri. Saat ini penggunaan teknologi RFID (Radio Frequency Identification) di indonesia mulai berkembang salah satunya kartu e-ktp yang sudah terdapat chip RFID tetapi untuk pemanfaatan masih kurang. Sistem kerja dari alat ini jika ingin membuka pintu brankas harus melakukan tapping menggunakan kartu e-ktp yang sudah terdaftar pada sistem keamanan brankas jika saat tapping sukses maka dari sistem keamanan akan menapilkan informasi di LCD dan mengirim informasi ke database yang sudah dibuat lalu ke aplikasi smartphone sebagai pengaman kedua, memanfaatkan teknologi Internet Of Things jika informasi dari smartphone disetujui maka pintu brankas akan terbuka dan aplikasi pada smartphone sebagai monitoring kondisi brankas jika akan terjadi pembobolan maka dari alat sistem keamanan brankas mengirim informasi ke aplikasi smartphone. Dan jika saat melakukan tapping kartu e-ktp yang tidak terdaftar di sistem keamanan maka pintu tidak akan terbuka. DOI : https://doi.org/10.26905/jtmi.v5i1.3105

Perancangan Hotspot Cerdas Berbasis Mikrotik Router Dan Web Server Mini PC Raspberry PI Pada Laboratorium Prodi sistem Komputer STMIK Asia Malang Tria Trilianto; Samsul Arifin
POSITIF : Jurnal Sistem dan Teknologi Informasi Vol 4 No 2 (2018): POSITIF : Jurnal Sistem dan Teknologi Informasi
Publisher : P3M Politeknik Negeri Banjarmasin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31961/positif.v4i2.568

The aim of this research was to developed a computer network system based on router os and web server authentication embedded in a mini PC, user login authentication process applied to a router hotspot system combined with mini PC so it can produce a good management system or which can be called as smart hotspot. The intelligent hotspot which is built has the ability to perform user management and authentication. User management built into this intelligent hotspot system has the ability to define user authority, bandwidth limitation hierarchy, and limitations to sites and user-accessible content, the system is capable of detecting malware, phishing or pornographic content or sites. This capability is created by implementing and modifying firewall features in mikrotik OS. User authentication is built by incorporating hotspot features in the router OS as well as web server embedded in a Raspberry PI mini PC. User authentication is applied with two login process that is first login process by entering username and password with purpose to determine user permissions, then second login process in the form of question according to given user class. Questions given in the form of problems related to the subjects Prodi Computer Systems. The results obtained from the construction of this intelligent hotspot system is a hotspot system that can provide education for users and provide more convenience services for users and learning media courses Computer Network Administration at STMIK Asia Malang. Based on the test system that has been done some weaknesses to the authentication and limitation that have been made, but from the weakness in general can be concluded that the system can run quite well.

SISTEM PROGRAM SMART GATE BERBASIS INDIKATOR SUHU DAN WASTAFEL OTOMATIS Mufidatul Islamiyah; Samsul Arifin; Rofiul Anam
POSITIF : Jurnal Sistem dan Teknologi Informasi Vol 7 No 2 (2021): Positif : Jurnal Sistem dan Teknologi Informasi
Publisher : P3M Politeknik Negeri Banjarmasin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31961/positif.v7i2.1238

This study discusses the system to overcome the current problems, namely the lack of discipline in washing hands and checking body temperature before entering the building which is one of the important things in implementing health protocols during the covid-19 pandemic. Both of these things are still often violated and are things that are often underestimated by visitors and the lack of firmness by officers in responding to these violations. In this study, a tool is designed to be used to check temperature and wash hands automatically which later will be an indicator to open a gate or automatic portal as a path or entrance to a building/building which is expected to be able to help officers work to be more disciplined. visitors who do not apply the health protocols that have been determined and are also able to minimize direct physical contact that will be caused by the current conventional system so as to minimize the risk of transmission of covid19. This tool uses a temperature sensor gy906/mlx 90614 as a non-contact temperature sensor and uses ultrasonic as a temperature sensor. Object distance detection, and also uses a dc motor actuator as a driver to open or close the gate. In the testing of the tools that have been carried out, the results obtained that the automatic gate system is able to run well by being controlled by both indicators, namely the temperature sensor and automatic sink as the main input in the whole system.

Seminar dan Workshop Pembelajaran Jarak Jauh di Islamic Boarding School Al Hamra Malang Siti Nurul Afiyah; Broto Poernomo; Samsul Arifin; Tria Aprilianto; Sunu Jatmika
Jurnal Pengabdian Masyarakat Vol 1 No 1 (2020): Jurnal Pengabdian Masyarakat
Publisher : LP2M Institut Teknologi dan Bisnis Asia Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32815/jpm.v1i1.228

Pembelajaran jarak jauh (juga disebut juga pendidikan jarak jauh) merupakan pelatihan yang diberikan kepada peserta atau siswa yang tidak berkumpul bersama di satu tempat secara rutin untuk menerima pelajaran secara langsung dari instruktur. Bahan-bahan dan instruksi-instruksi detail yang bersifat khusus dikirimkan atau disediakan untuk para peserta yang selanjutnya melaksanakan tugas-tugas yang akan dievaluasi oleh instruktur. Dalam kenyataannya dapat dimungkinkan instruktur dan peserta tersebut terpisah tidak hanya secara geografis namun juga waktu. Akan tetapi pada masa pandemic Covid-19 ini kita sebagai pengajar dituntut bisa mengajarkan materi melalui online. Banyak sekali aplikasi yang bisa digunakan dalam pembelajaran online, akan tetapi banyak pengajar yang masih minim pengetahuan dalam penggunaan aplikasi ini. Oleh karena itu tim pengabdian institut teknologi dan bisnis asia Malang mengadakan seminar dan workshop pembelajaran jarak jauh di Islamic Boarding School Al Hamra Malang. Seminar ini bertujuan untuk menambah pengetahuan tentang aplikasi pembelajaran online bagi pendidik di Islamic Boarding School Al Hamra Malang

Aplikasi Sistem Keamanan Brankas Menggunakan E-KTP Berbasis Android Tria Aprilianto; Samsul Arifin; Sunu Jatmika
Jurnal Teknika Vol 14, No 1 (2022): Jurnal Teknika
Publisher : Universitas Islam Lamongan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30736/jt.v14i1.767

Combination locks are also easy to break into by thieves. Currently, the use of RFID (Radio Frequency Identification) technology in Indonesia is starting to develop, one of which is an e-Ktp card that already has an RFID chip on it, but its utilization is still lacking. remote safe using Internet Of Things technology which is monitored through a smartphone application. The way this tool works is that the safe is connected to the internet through a tool called Nodemcu Esp8266 to send ID data on the E-KTP, door sensor data and vibration sensor data to the database. Where the author uses the Firebase Realtime Database as an online database, after the ID data is stored in the database, it is then sent to an Android-based smartphone application which is also a second security and can monitor and control the safe door.

Design of a Television Viewer Safe Distance Control Device for Children Ages 5 to 10 Years Using Arduino Uno with Motion Sensor and Proximity Sensor Imam Faizal; Samsul Arifin
Procedia of Engineering and Life Science Vol 1 No 2 (2021): Proceedings of the 2nd Seminar Nasional Sains 2021
Publisher : Universitas Muhammadiyah Sidoarjo

When a child is 5 to 10 years old, it is very vulnerable to experience impaired health. One of them is vision. Vision is the main source that is very useful for life. A mother is worried when her children are constantly watching television. The anxiety will increase when children watch their favorite shows on television is very closely distance. From the description of the problem above, the writer found an idea to make a tool that can remind young children to maintain their visibility while watching television. The tool uses an Arduino Uno microcontroller coupled with a distance sensor and a motion sensor. When the sensor detects humans are closed to the television, then the tool will give a warning through the speaker in the form of sound. From the results of research when the sensor detects the distance between humans and the television is too close, the device will warn by making noise from the speakers. After 20 trials, data was obtained that 17 times the device is successfully detected movement via sensor and could give a warning to television viewers. Hope with the creation of a television viewers safe space can help parents to reduce anxiety when children watch television

Aplikasi Sistem Keamanan Brankas Menggunakan E-KTP Berbasis Android Tria Aprilianto; Samsul Arifin; Sunu Jatmika
Jurnal Teknika Vol 14 No 1 (2022): Jurnal Teknika
Publisher : Universitas Islam Lamongan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30736/jt.v14i1.767

Combination locks are also easy to break into by thieves. Currently, the use of RFID (Radio Frequency Identification) technology in Indonesia is starting to develop, one of which is an e-Ktp card that already has an RFID chip on it, but its utilization is still lacking. remote safe using Internet Of Things technology which is monitored through a smartphone application. The way this tool works is that the safe is connected to the internet through a tool called Nodemcu Esp8266 to send ID data on the E-KTP, door sensor data and vibration sensor data to the database. Where the author uses the Firebase Realtime Database as an online database, after the ID data is stored in the database, it is then sent to an Android-based smartphone application which is also a second security and can monitor and control the safe door.

Pengaruh Catu Daya pada Kecepatan Motor Navigasi Mobile Robot Line Follower Berbasis Arduino Nano Samsul Arifin; Siti Sendari; Ilham Ari Elbaith Zaeni
Jurnal Inovasi Teknologi dan Edukasi Teknik Vol. 1 No. 10 (2021)
Publisher : Universitas Ngeri Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (473.563 KB)

Mobile robot line follower is still a very popular research topic. Line follower robots are the basis for developing robot applications in various fields. The key to a robot's success is being able to read and follow lines precisely and quickly. Many control system methods have been developed to improve the robot's ability to follow the line. Several methods including PID and Fuzzy which have been widely studied. Even though it is supported by the control method there is one problem that affects the robot navigation system, namely the power supply voltage. The robot's power supply is usually sourced from a battery which within a certain usage period will decrease. When the power supply is reduced, the robot's navigation system will also have problems, whether it is getting slower or the robot becomes zig-zag. When the power supply voltage is fully charged, the DC motor will tend to be fast and conversely, when the power supply voltage drops, the DC motor will run slower. The results of testing the effect of the power supply voltage on the speed of robot navigation show that in the power supply range of 8.44V to 6V the best speed is obtained at a voltage of 7.2V. Mobile robot line follower masih menjadi topik penelitian yang sangat populer. Robot line follower menjadi basic untuk mengembangkan aplikasi robot dalam berbagai bidang. Kunci keberhasilan robot adalah dapat membaca dan mengikuti garis dengan tepat dan cepat. Metode sistem kontrol banyak dikembangkan untuk meningkatkan kemampuan robot dalam mengikuti garis. Beberapa metode diantaranya PID dan Fuzzy yang sudah banyak diteliti. Meskipun didukung oleh metode kontrol ada satu masalah yang berpengaruh pada sistem navigasi robot yaitu tegangan catu daya. Catu daya robot biasanya bersumber dari baterai yang dalam jangka waktu pemakaian tertentu akan berkurang. Pada saat catu daya berkurang maka sistem navigasi robot juga akan bermasalah baik itu semakin melambat atau robot menjadi zigzag. Pada saat tegangan catu daya terisi penuh maka motor DC akan cenderung kencang dan sebaliknya ketika turun tegangan catu dayanya maka motor DC akan lebih pelan. Hasil pengujian pengaruh tegangan catu daya pada kecepatan navigasi robot menunjukkan bahwa pada range catu daya 8,44V sampai 6V didapatkan kecepatan terbaik berada pada tegangan 7,2V.

Perancangan Model Pergerakan Mobile Robot dengan Metode Deep Q Learning Samsul Arifin; Siti Sendari; Ilham Ari Elbaith Zaini
JEPIN (Jurnal Edukasi dan Penelitian Informatika) Vol 9, No 3 (2023): Volume 9 No 3
Publisher : Program Studi Informatika

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26418/jp.v9i3.64541

Path Planning merupakan salah satu permasalahan yang sering terjadi pada mobile robot. Tujuan utama dalam path planning adalah untuk mendapatkan path/jalur yang paling optimal sehingga bisa meminimalisir waktu komputasi. Kelemahan yang umum terjadi pada path planning adalah waktu komputasi yang besar pada suatu environment. Dengan adanya permasalahan ini maka akan diterapkan metode deep Q learning untuk meningkatkan kecepatan waktu komputasi. Metode deep q learning menyimpan hasil pembelajaran dalam bentuk neural network. Mobile robot dilatih agar dapat menemukan jalur pada environment yang belum dikenali sama sekali. Melalui beberapa tahapan dalam proses training dan proses running maka mobile robot dapat menemukan jalur dengan cepat. Keseimbangan proses eksplorasi dan eksploitasi akan mempengaruhi proses training. Pada penelitan ini ditentukan nilai untuk proses eksplorasi adalah 80 episode pertama. Pada proses training telah didapatkan nilai parameter gamma yang optimal adalah 0.9. Setelah mendapatkan pengetahuan dari proses training maka mobile robot dapat menemukan path yang paling optimal dengan waktu tempuh ± 1.92s.

CONTROL SISTEM INKUBATOR TELUR AYAM MENGGUNAKAN METODE FUZZY LOGIC Mufidatul islamiyah; Samsul Arifin
POSITIF : Jurnal Sistem dan Teknologi Informasi Vol 9 No 2 (2023): Positif : Jurnal Sistem dan Teknologi Informasi
Publisher : P3M Politeknik Negeri Banjarmasin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31961/positif.v9i2.2037

Technology is currently developing very rapidly, one of which is the technology of hatching eggs in chicken farms. The technology used is a chicken egg incubator why do farmers need an incubator in hatching because many farmers experience hatch failure, so that crop failure does not occur, this incubator is designed to achieve an ideal temperature of 37-40 0C, this ideal temperature is a good temperature in hatching chicken eggs, if it is too hot it will cause the quality of the eggs to decrease and even cause death. Controlling the temperature in this incubator uses the fuzzy mamdani and the DS18B20 sensor. The DS18B20 sensor is used to get the temperature in the incubator as input for fuzzy logic, the output of this system is the fan speed (PWM) and lights to make the temperature warmer. Based on the simulation results using fuzzy logic at a normal temperature of 39.5 0C with a total of 25 eggs the fan speed reaches normal, namely 160 PWM.

Title

Found 12 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 12 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 12 Documents
Search