Garuda - Garba Rujukan Digital

SAKARIFIKASI SERAT TANDAN KOSONG DAN PELEPAH KELAPA SAWIT SETELAH PRETREATMENT MENGGUNAKAN KULTUR CAMPURAN JAMUR PELAPUK PUTIH Phanerochaete chrysosporium dan Trametes versicolor Hermiati, Euis; Risanto, Lucky; Anita, Sita Heris; Aristiawan, Yosi; Hanafi, Ahmad; Abimanyu, Haznan
Jurnal Penelitian Hasil Hutan Vol 32, No 2 (2014): Jurnal Penelitian Hasil Hutan
Publisher : Pusat Litbang Keteknikan Kehutanan dan Pengolahan Hasil Hutan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Penggunaan kultur campuran jamur pelapuk putih pada proses pretreatment bahan lignoselulosa belum banyak diteliti. Penelitian ini bertujuan untuk mempelajari pengaruh penggunaan kulturÃÂ Phanerochaete chrysosporium dan Trametes versicolor pada proses pretreatment serat tandan kosong dan pelepah kelapa sawit terhadap hasil sakarifikasinya. Inokulum P. ChrysosporiumÃÂ dan T. versicolor dituangkan ke dalam sampel substrat serat tandan kosong dan pelepah kelapa sawit (40-60 mesh) yang telah disterilkan, masing-masing sebanyak 5% (w/v), sehingga total inokulum yang ditambahkan ke dalam kedua macam substrat masing-masing 10% (w/v). Sampel diinkubasikan pada suhu ÃÂ±27ÃÂ°C selama 4 minggu. Sebagian dari contoh diambil dan lalu diperiksa setelah masa inkubasi 1, 2, 3, dan 4 minggu. Sakarifikasi dilakukan menggunakan enzim selulase sebanyak 20 FPU per g biomassa dan ÃÂ²-glukosidase dalam shaking waterbath pada suhu 50ÃÂ°C selama 48 jam. Analisis gula pereduksi, glukosa dan xilosa dilakukan terhadap hasil sakarifikasi. Rendemen gula pereduksi, konsentrasi glukosa dan xilosa tertinggi dari tandan kosong kelapa sawit. diperoleh dari sakarifikasi serat dengan pretreatment selama 4 minggu, yaitu masing-masing 13,08%, 0,86 mg/g dan 0,13 mg/g, sedangkan rendemen gula pereduksi, konsentrasi glukosa dan xilosa tertinggi dari pelepah kelapa sawit didapatkan dari sakarifikasi substrat dengan pretreatment selama 2 minggu, yaitu masing-masing 8,98%, 0,92 mg/g dan 0,23 mg/g.

CENTRAL KALIMANTANâS FAST GROWING SPECIES: SUITABILITY FOR PULP AND PAPER Adi, Danang Sudarwoko; Wahyuni, Ika; Risanto, Lucky; Rulliaty, Sri; Hermiati, Euis; Dwianto, Wahyu; Watanabe, Takashi
Indonesian Journal of Forestry Research Vol 2, No 1 (2015): Indonesian Journal of Forestry Research
Publisher : Secretariat of Forestry Research and Development Agency

Fast growing wood species could be promising to fulfill the gap between wood demand and supply. Due to their low quality, the utilization of fast growing wood species has been limited to pulp and paper. Our previous study on the fiber characteristic and density of the 30 unutilized fast growing wood species from PT Sari Bumi Kusuma, Central Kalimantan, showed that there were five species which could be promising as pulp and paper material. These wood species have fiber lengths of more than 2200 Âµm. This research was conducted to get information another property of the five woods to more discover their potential utilization, especially for pulp and paper material. The wood species investigated were Endospermum diadenum, Dillenia sp., Adinandra dumosa, Adinandra sp., and Nauclea junghuhnii. The results showed that these five species have a long of fiber length, which are classified in Class I, low to medium density, fiber derived value which the total score felt in the class I. The chemical compositions showed that extractive, holocelullose, Î±-cellulose, and lignin contents were 1.74-4.12%, 62.73-73.83%, 37.24-46.97%, 29.68-38.92%, respectively. Based on fiber characteristic, density, and chemical properties, these five species could be used as an alternative raw material for pulp and paper industries.Â

Biological Pretreatment of Oil Palm Frond Fiber Using White-Rot Fungi for Enzymatic Saccharification Hermiati, Euis; Anita, Sita Heris; Risanto, Lucky; Styarini, Dyah; Sudiyani, Yanni; Hanafi, Achmad; Abimanyu, Haznan
Makara Journal of Technology Vol. 17, No. 1
Publisher : UI Scholars Hub

Show Abstract | Download Original | Original Source | Check in Google Scholar

Oil palm frond is one type of lignocellulosic biomass abundantly and daily available in Indonesia. It contains cellulose which can be converted to glucose, and further processed to produce different kinds of value –added products. The aim of this research is to study the effects of biological pretreatment of oil palm frond (OPF) fiber using Phanerochaete chrysosporium and Trametes versicolor on the enzymatic saccharification of the biomass. The OPF fiber (40-60 mesh sizes) was inoculated with cultures of the two fungi and incubated at 27 °C for 4 weeks. The samples were taken after 1, 2, 3, and 4 weeks of incubation. Chemical components of the biomass after pretreatment were analyzed. The saccharification of the pretreated samples using cellulase and β-glucosidase was performed in a water bath shaker at 50 °C for 48 hours. The concentration of reducing sugar increased with increasing of incubation time, either in those pretreated with culture of P. chrysosporium or with T. versicolor. Pretreatment of OPF fiber using single culture of T. versicolor for 4 weeks gave the highest reducing sugar yield (12.61% of dry biomass).

Properties of Lignin from Oil Palm Empty Fruit Bunch and Its Application for Plywood Adhesive Risanto, Lucky; Hermiati, Euis; Sudiyani, Yanni
Makara Journal of Technology Vol. 18, No. 2
Publisher : UI Scholars Hub

Show Abstract | Download Original | Original Source | Check in Google Scholar

Lignin from lignocellulosic biomass is a potential biopolymer for wood adhesive. The aims of this study were to characterize lignin isolated from the black liquor of oil palm empty fruit bunch fiber pretreated with steam explosion in alkaline conditions and to examine the bond quality of aqueous polymer isocyanate (API) adhesive prepared from lignin, natural rubber latex (NRL), and polyvinyl alcohol (PVA) as base polymers with isocyanate crosslinkers. Lignin was precipitated from the black liquor by adding hydrochloric acid; then the precipitate was separated by filtration, thoroughly washed with water up to pH 2 and pH 5, and dried. The isolated lignin was characterized by ultimate analysis, UV spectroscopy, FT-IR spectroscopy, and thermal analysis. Three-layer plywood samples were prepared, and the bond strengths of the plywood samples were determined in dry conditions and after cyclic boiling. The lignin isolates with different pH values did not have significantly different chemical and thermal properties. Both lignin isolates had similar C, H, and O contents, identical functional groups in the FTIR spectra, similar absorption in the UV spectra, and high decomposition temperatures. The base polymers composition that could produce API adhesive for exterior applications was NRL/PVA/lignin (4/4/2). The use of more lignin in the adhesive formulation decreased the bond strength of the plywood.

The Effect of Ultrasonication and Delignification Treatment on the Sugar Released Value of Wood Wahyuni, Ika; Adi, Danang Sudarwoko; Risanto, Lucky; Fitria, Fitria; Dwianto, Wahyu; Hartati, Sri; Kaida, Rumi; Hayashi, Takahisa
Wood Research Journal Vol 5, No 2 (2014): Wood Research Journal
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/wrj.2014.5.2.37-45

The objective of these research was to study the impact of ultrasonication and delignification pretreatments in several wood species on their easiness for enzymatic hydrolysis, having the potential to be developed as the feedstocks for bioethanol production. Four different wood species from three botanical gardens in Indonesia have been selected, i.e., Gymnostoma sumatranum, Firmiana malayana, Pterocarpus indicus, and Alstonia scholaris, due to their higher sugar released values than a fast-grown tree, Sengon (Paraserianthes falcataria), when all were directly enzymatically hydrolyzed without pretreatment. The sugar released values after ultrasonication and enzymatic hydrolysis were between 3 – 5.5 mg/100 mg wood meal. When delignification pretreatment was performed, the sugar released values were higher than those with ultrasonication, ranging between 4 – 10.2 mg/100 mg wood meal. All the sugar released values after pretreatment were higher than those without pretreatment. Gymnostoma sumatranum was selected as the most potential wood species in this study due to its consistency among the species producing highest sugar released across different treatments. The SEM results showed that there was no significant changes in the morphological structure of the untreated fiber before and after enzymatic saccharification since it still had a complex structure due to the high lignin content. However, after the delignification treatment, the surface morphology of the fiber showed a decrease in the number of pits of the fiber, the surface residual of pits were reduced, parallel lines were more clearly visible, and the fiber structure was damaged with more small holes presented. The surface morphology of the fiber from the wood powder having delignification pretreatment supports the sugar released values which shows that the these values were higher than other treatments due to more recalcitrant substances were degraded, making it was easier for enzymes to break down cellulose. After ultrasonication, the SEM result showed less disrupted cell wall compared to after delignification which confirmed the higher sugar released data with delignification.

The Effect of Ultrasonication and Delignification Treatment on the Sugar Released Value of Wood Wahyuni, Ika; Adi, Danang Sudarwoko; Risanto, Lucky; Fitria, Fitria; Dwianto, Wahyu; Hartati, Sri; Kaida, Rumi; Hayashi, Takahisa
Wood Research Journal Vol 5, No 2 (2014): Wood Research Journal
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/wrj.2014.5.2.37-45

The objective of these research was to study the impact of ultrasonication and delignification pretreatments in several wood species on their easiness for enzymatic hydrolysis, having the potential to be developed as the feedstocks for bioethanol production. Four different wood species from three botanical gardens in Indonesia have been selected, i.e., Gymnostoma sumatranum, Firmiana malayana, Pterocarpus indicus, and Alstonia scholaris, due to their higher sugar released values than a fast-grown tree, Sengon (Paraserianthes falcataria), when all were directly enzymatically hydrolyzed without pretreatment. The sugar released values after ultrasonication and enzymatic hydrolysis were between 3 – 5.5 mg/100 mg wood meal. When delignification pretreatment was performed, the sugar released values were higher than those with ultrasonication, ranging between 4 – 10.2 mg/100 mg wood meal. All the sugar released values after pretreatment were higher than those without pretreatment. Gymnostoma sumatranum was selected as the most potential wood species in this study due to its consistency among the species producing highest sugar released across different treatments. The SEM results showed that there was no significant changes in the morphological structure of the untreated fiber before and after enzymatic saccharification since it still had a complex structure due to the high lignin content. However, after the delignification treatment, the surface morphology of the fiber showed a decrease in the number of pits of the fiber, the surface residual of pits were reduced, parallel lines were more clearly visible, and the fiber structure was damaged with more small holes presented. The surface morphology of the fiber from the wood powder having delignification pretreatment supports the sugar released values which shows that the these values were higher than other treatments due to more recalcitrant substances were degraded, making it was easier for enzymes to break down cellulose. After ultrasonication, the SEM result showed less disrupted cell wall compared to after delignification which confirmed the higher sugar released data with delignification.

CENTRAL KALIMANTAN’S FAST GROWING SPECIES: SUITABILITY FOR PULP AND PAPER Adi, Danang Sudarwoko; Wahyuni, Ika; Risanto, Lucky; Rulliaty, Sri; Hermiati, Euis; Dwianto, Wahyu; Watanabe, Takashi
Indonesian Journal of Forestry Research Vol. 2 No. 1 (2015): Indonesian Journal of Forestry Research
Publisher : Association of Indonesian Forestry and Environment Researchers and Technicians

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59465/ijfr.2015.2.1.21-29

Recent studies of fast growing species grown in PT. Sari Bumi Kusuma, Central Kalimantan, show that based on their fiber dimensions there are five species, namely Endospermum diadenum, Dillenia spp., Adinandra dumosa, Adiandra sp., and Nauclea junghuhnii with good potential for pulp and paper production. The fiber length of those five wood species are was more than 2,200 µm on average. This paper studies the physical properties, fiber dimensions and their chemical contents to predict the paper and pulp quality. The result shows that all of the species were classified in the medium to high density category. All species were classified into the first class quality for pulp and paper. Based on chemical contents, Dillenia sp. is the most suitable species due to its high value of holocellulose and a-cellulose, low lignin content, and its fiber length is about 3,119 µm on average. A. dumosa also has good opportunities because it had the longest fiber lengths (3,137 µm on average) and high value of holocellulose, even though it has the highest lignin content. While Nuclea junghuhnii is less suitable due to low values of holocellulose and a-cellulose.

Title

Found 7 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 7 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 7 Documents
Search