Claim Missing Document
Check
Articles

Found 9 Documents
Search

Fuel Consumption Analysis of Injection System and Carburetor System on Honda Beat Fi 2013 Nyoman Sutarna; I Nengah Ludra Antara; Daud Simon Anakottapary
Logic : Jurnal Rancang Bangun dan Teknologi Vol 20 No 3 (2020): November
Publisher : Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31940/logic.v20i3.2170

Abstract

An injection system is a process of burning fuel on an internal combustion engine by using an electronic system to inject fuel with air into the combustion chamber. The carburetor system uses a nozzle to blur the fuel mixture with the combustor air. The purpose of this study was to determine differences in the value of fuel consumption from the injection system with the carburetor system. This research was conducted by the experimental method. The results of the analysis showed that the average value of fuel consumption even with the injection system was 51.53ml, while the mean value of the carburetor system was 90.40 ml, this meant that the injection system was more efficient compared to the carburetor system of 44.89 ml or 47%. Conclusion injection system at any rotation is more economical than the carburetor system. It is recommended to conduct further research by taking real data that is distance and travel time.
PENGARUH TINGKAT INTELEGENSI DAN LINGKUNGAN KAMPUS TERHADAP PERILAKU DAN PRESTASI AKADEMIK PADA MATA KULIAH GAMBAR TEKNIK MESIN SEMESTER II JURUSAN TEKNIK MESIN POLITEKNIK NEGERI BALI I Nengah Ludra Antara
Logic : Jurnal Rancang Bangun dan Teknologi Vol 14 No 3 (2014): November
Publisher : Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (59.214 KB)

Abstract

Dalam dunia pendidikan perlu mengetahui intelegensi dari para mahasiswa, dan bagaimana kaitan terhadap pretasi akademiknya, pada pola permodelan struktural dengan alat analisis software AMOS 6, penelitian ini menemukan bahwa intelegensi berpengaruh terhadap perilaku maupun prestasi akademik yang signifikan dengan koefisiensi regresi:0.53 dan 0.55, begitu pula lingkungan kampus berpengaruh terhadap perilaku dan prestasi akademik yang signifikan dengan koefisiensi regresi:0.49 dan 0.52, sedangkan intelegensi, lingkungan kampus dan perilaku sama – sama mempengaruhi prestasi akademik yang sangat signifikan dengan koefisiensi regresi:1.05. Sehubungan dengan hal tesebut, penulis harapkan betul-betul memeperhatikan, menjaga dan meningkatkan kesadaran para mahasiswa tentang pentingnya lingkungan kampus yang nyaman, aman, bersih dan lestari begitu pula kedesiplinan yang sangat erat kaitanya dengan perilaku dari para mahasiswa.
ANALISIS GANGGUAN SISTEM REM PADA MOBIL DAIHATSU XENIA SERTA PENANGANANNYA I Nengah Ludra Antara
Logic : Jurnal Rancang Bangun dan Teknologi Vol 18 No 1 (2018): March
Publisher : Pusat Penelitian dan Pengabdian kepada Masyarakat (P3M) Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (281.661 KB) | DOI: 10.31940/logic.v18i1.792

Abstract

Suatu kendaraan dikatakan baik apabila bisa memberikan rasa aman dan nyaman bagi pengendara. Semua jenis kendaraan roda dua, roda empat maupun kendraan berat dilengkapi sistem rem yang berfungsi untuk mengurangi dan menghentikan kecepatan kendaraan atau memungkinkan kendaraan parkir di tempat yang menurun. Sistem rem ini sangat penting karena merupakan sistem keselamatan utama, sehubungan dengan hal tersebut penulis ingin menganalisa gangguan sistem rem pada mobil Daihatsu Xenia khususnya penyebab terjadinya bunyi dan getar pada sistem rem, dalam menganalisa gangguan sistem rem ini penulis memerlukan beberapa peralatan untuk menunjang proses pengambilan data, diantaranya adalah jangka sorong, micrometer, dan dial gauge.Tempat dan lokasi yang penulis lakukan dalam melakukan penelitian ini adalah di bengkel Kharisma Sentosa Daihatsu, ruang lingkup penelitian dalam penelitian ini adalah gangguan sistem rem pada mobil Daihatsu Xenia, penyebab gangguan sistem rem pada mobil Daihatsu Xenia serta penanganan yang harus dilakukan saat terjadinya gangguan pada sistem rem Daihatsu Xenia.Dari hasil penelitian yang berupa pemeriksaan dan pengukuran yang telah dilakukan maka dapat disimpulkan hasil pengukuran pad lining 9 mm sampai 1 mm dapat dikatakan baik, pengukuran disc rotor 18 mm sampai 17 mm masih dikatakan baik, pengukuran shoe lining 4,4 mm sampai 1 mm dan pengukuran drum 203 mm sampai 204 mm.
PENGARUH ALAT KOMUNIKASI TRADISIONAL DAN MODEREN TERHADAP PELAKSANAAN ODALAN DI KAHYANGAN TIGA DESA ADAT REJASA I Nengah Ludra Antara
Matrix : Jurnal Manajemen Teknologi dan Informatika Vol 5 No 2 (2015): MATRIX - Jurnal Manajemen Teknologi dan Informatika
Publisher : Unit Publikasi Ilmiah, P3M Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (79.455 KB)

Abstract

Masyarakat Bali terkenal sebagai masyarakat yang kaya akan warisan budaya. Mereka menerimawarisan budaya secara tradisional, dengan perkembangan zaman dari tradisional beralih kemoderen salah satunya adalah alat komunikasi. Dalam pelaksanaan upacara keagamaan di Bali selalu menggunakan alat komunikasi baik tradisional maupun moderen yaitu kulkul dan corong. Di Bali dikenal adanya Desa Adat dan Kahyangan Tiga sebagai tempat persembahyangan umat Hindu. Salah satu objek penelitian dilakukan di Dasa Adat Rejasa tentang pengaruh alat kumunikasi tradisional (kulkul) dan moderen (corong) terhadap pelaksanaan odalan. Dengan analisis Full Model Standardized Estimates untuk alat komunikasi tradisional yaitu kulkul sebesar 0.73, dan alat komunikasi moderen yaitu corong sebesar 0.28. Jadi, alat komunikasi tradisional yaitu kulkul lebih signifikan memengaruhi daripada alat komunikasi moderen, begitu pula dalam uji Goodness of Fit merupakan suatu perbandingan untuk menentukan nilai kritis (cut of value) yang direkomendasi dari hasil komputerisasi secara stasistik persamaan Full Model Standardized, dari hasil komparasi uji Goodness Of Fit dengan Indeks Cut Off Value yang telah direkomendasi oleh dedudonan odalan (ritual) dan alat komunikasi moderen (corong) sebagai pendukung dalam pelaksanaan odalan.para pakar, dengan indeks Chi.square:69.947 cukup, nilai Sig.Probability (P):0.049 lebih kecil 0.050 signifikan, RMSEA:0.080 dengan hasil komputerisasi 0.076 lebih kecil signifikan, begtu pula pada nilai CDMIN/DF:2.000 dengan nilai hasil komputerisasi1.345 lebih kecil dikatagorikan signifikan, nilai TLI:0.950 lebih kecil dari 0.730dengan nilai yang dipersyaratkan lebihbesar selisih nilainya 0.220 cukup, CFI:0.950 juga lebih kecil dari 0.787 cukup, nilai GFI:0.900 dengan selisih 0.066 dan nilai AGFI:0.900 dengan selisih 0.149 dari komputerisasi 0.751 lebih kecil dari yang dipersyaratkan dikatagorikan cukup. Jadi alat komunikasi tradisional (kulkul) wajib dalam pelaksanaan dudonan upacara odalan, sedangkan alat komunikasi moderen (corong) sebagai pendukung.
The effect of replacing standard carburetor with PE-28 carburetor on performance fuel consumption on 2006 Honda Tiger Revo I Nengah Ludra Antara; I Nyoman Sutarna; Ida Bagus Puspa Indra
Journal of Applied Mechanical Engineering and Green Technology Vol. 2 No. 3 (2021): November 2021
Publisher : Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (359.965 KB) | DOI: 10.31940/jametech.v2i3.97-101

Abstract

Carburetors are one of the important components on motorcycles, through modification of replacing Standard Carburetor with Racing Carburetor is one of the ways to improve engine performance. There are several types and sizes of PE, namely PE 24, PE 28, PE 38. PE 28 carburetor is often used on racing motorbikes, both Drag bikes and Roodrace bikes, where this carburetor is able to produce maximum engine performance. By testing the maximum power using a standard carburetor found at 7000 rpm engine speed, which is 11.3 HP, while the maximum power testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.7 HP. For testing the maximum torque using a standard carburetor found at 6000 rpm engine speed, which is 11.7 N.m, while the maximum torque testing using a PE 28 carburetor is found at 7000 rpm engine speed, which is 11.8 N.m. The use of PE 28 carburetor on a 4 stroke motorcycle greatly affects the amount of fuel consumption, it is because the PE 28 carburetor is a racing carburetor that is very suitable for those who want top speed. In addition, the advantage of the PE 28 carburetor is that it is able to improve engine performance because the type of carburetor is different from the standard and there are changes in the dimensions of the venturi hole and intake manifold, so that it can fog up more air and fuel to be brought into the combustion chamber or into the engine cylinder.
The Effect of Material Conveyances on Workload, Musculoskeletal Disorders, Productivity and Performance in the Process of Plate Cutting I Nyoman Sutarna; I Nengah Ludra Antara; Daud Simon Anakottapary
Logic : Jurnal Rancang Bangun dan Teknologi Vol. 21 No. 3 (2021): November
Publisher : Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1436.565 KB) | DOI: 10.31940/logic.v21i3.197-204

Abstract

The use of material conveyances that are not in accordance with the concept of ergonomics harm the human body. Repair of work brushes by applying ergonomics to material conveyances can reduce the risk category. The purpose of this study was to determine the effect of material conveyance on reducing workload, musculoskeletal disorders, increasing productivity and performance. The study was conducted using the same subject design method with a sample of 16 workers. The data were analyzed by paired t-test with a significant level of p<0.05. The results of the analysis showed that the PO workload data was 104.4 beats per minute, P1 was 93.5 beats per minute there was a decrease of 10.9 beats per minute or 10.4%, PO musculoskeletal complaints were 80.1 scores, P1 was 70.0 the scores were decreased by 10.1 or 12.6%, PO productivity of 0.201, P1 of 0.355, an increase of 0.154 or 43.4%. The conclusion is that the use of material conveyances means a decrease in workload, musculoskeletal disorders, an increase in productivity and performance. It is recommended to workers to use material conveyances equipment in carrying out transport and material transport activities.
SIMULATION DESIGN OF AUTOMATIC SLIDING GATE CONTROL DEVICES I Nengah Ludra Antara; I Nyoman Sutarna; Kadek Agus Mahabojana D.P.; Ida Bagus Puspa Indra
Logic : Jurnal Rancang Bangun dan Teknologi Vol. 22 No. 2 (2022): July
Publisher : Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2625.219 KB) | DOI: 10.31940/logic.v22i2.140-146

Abstract

The gate is a means of dividing the land between the house and the road. The gate also serves for security and comfort as a place to live. As a home security, the gate is made high and equipped with a safety lock. With a gate, you will feel comfortable because other people who come can't enter the house directly, and it's often difficult or overwhelmed when opening or closing the gate. In the case of a gate that has a large size and is also heavy, this will overwhelm us so that a lot of energy and time is needed. The automatic gate control device designed is an electric motor that makes it easier for people to open or close the gate by remote control while at home or at work. Based on the results of the design that has been made, the simulation of the automatic sliding gate control device is expected to solve the problems encountered in the field where the dimensions of the gate are 1500mm x 1000mm x 80mm with a weight of 27kg, the electric motor used is reversible AC which has a speed of 1300 RPM, a power of 60 watts and a 1: 60 gearbox which has become 1 part, the speed of the electric motor is transmitted by a gear with a diameter of 78mm, so that the average gate opening and closing speed is 12.52 and 13.21s with a difference of 0.69s, with the The controller used is the AK-T02 module and the AKJ027 remote can work up to a distance of 10 m. It is hoped that making this control device simulation can be a reference in making automatic gate control devices for homes and other gates.
Simulation Design Of Animal Waste Treatment Installation System Using Water Level Control System I Nyoman Gunung; I Nengah Ludra Antara; I Nyoman Sutarna; Kadek Agus Mahabojana D. P.; Made Dika Nugraha
Logic : Jurnal Rancang Bangun dan Teknologi Vol. 23 No. 1 (2023): March
Publisher : Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31940/logic.v23i1.8-15

Abstract

The simulation design of this animal waste treatment plant is a design that applies the sewage treatment plant system which is made to cope with environmental pollution, especially rivers due to indiscriminate disposal of animal waste. Making this animal waste treatment plant provides information to readers or the public about how to design an animal waste treatment plant system and the performance of the sewage treatment system so that people know how to deal with environmental pollution caused by the livestock themselves. The manufacture of this installation system uses data collection methods from direct farmers and theories obtained from books, journals, and articles related to sewage treatment plant theory, plumbing, electricity, and others. Finally, the data was collected by testing the animal dung waste treatment system where the test data was taken from the pH content of the water used for processing the animal dung waste treatment system. The test results on the sewage treatment plant system concluded that in order to obtain optimal results or water pH content, namely the pH content of 6, it is necessary to deposit animal manure between two to three days, while the maximum processing of this system is the pH content of 6.5. and processing of animal manure, which is on the fourth day to get the maximum pH content.
Cutting Speed Analysis of Organic Waste Chopping Machine Fly Wheel Model Level Control I Putu Darmawa; I Nengah Ludra Antara; I Nyoman Sutarna; Ida Bagus Puspa Indra; I Nyoman Gunung
Logic : Jurnal Rancang Bangun dan Teknologi Vol. 23 No. 2 (2023): July
Publisher : Unit Publikasi Ilmiah, P3M, Politeknik Negeri Bali

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31940/logic.v23i2.121-130

Abstract

This machine is used to chop leaves, twigs and branches into very small pieces, to avoid the bad smell due to the decay of organic waste and can be used as compost. The amount of cutting speed on the organic waste chopping machine with a chopping time of 2.5 kg of ketapang leaves is the average time obtained without fly wheels 2.0 minutes and with fly wheels 1.7 minutes, a time difference of 0.3 minutes. The chopping time of 2.5 kg of ketapang branches with an average time obtained without a fly wheel of 2.2 minutes and with a fly wheel of 2.0 minutes, a time difference of 0.2 minutes. The chopping time of teak branches is 2.5 kg with an average time obtained without a fly wheel of 2.6 minutes and with a fly wheel of 2.0 minutes, so the time difference is 0.6 minutes. So the cutting speed using a fly wheel is better. The results of the productivity obtained on the organic waste chopping machine, for the results of leaf chopping productivity without a fly wheel of 48% and those using a fly wheel of 58%, and the results of leaf chopping with a fly wheel are 10% more productive, for the productivity of chopping twigs without a fly wheel of 44% and those using a fly wheel of 49%, so the results of chopping twigs with a fly wheel are 5% more productive, and the results of chopping branches without a fly wheel of 37% and those using a fly wheel of 49%, so the results of chopping branches with a fly wheel are 12% more productive.