Garuda - Garba Rujukan Digital

Kajian Pustaka Sintesis Nanoselulosa dari Tandan Kosong Kelapa Sawit sebagai Filler Pembuatan Tisu Toilet Irwan Hidayatulloh; Emmanuela Maria Widyanti; Chandra Aztaris; Awalum Melanitria; Lidya Elizabeth
Fluida Vol 15 No 1 (2022): FLUIDA
Publisher : Jurusan Teknik Kimia, Politeknik Negeri Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35313/fluida.v15i1.2711

Tisu merupakan salah satu jenis kertas yang terbuat dari serat kayu. Peningkatan kebutuhan tisu di masyarakat meningkatkan penebangan pohon. Tandan kosong kelapa sawit (TKKS) merupakan limbah dari kelapa sawit yang mengandung selulosa tinggi dan memiliki potensi untuk dimanfaatkan sebagai filler dalam pembuatan tisu. Penelaahan kajian pustaka ini dilakukan untuk mengetahui potensi pemanfaatan nanoselulosa TKKS sebagai filler pembuatan tisu toilet. Sesuai persyaratan, bahan untuk tisu diharapkan mempunyai kandungan selulosa 70 %. Perhitungan kadar selulosa optimum dengan delignifikasi ditentukan dari regresi linear menggunakan software SPSS Statistics 25. Rancangan variabel proses menggunakan software Minitab 19. Metode perancangan yang digunakan dalam percobaan adalah placket burman. Hasil delignifikasi optimum didapatkan pada suhu 150-160°C, NaOH 15-17,5%, dan waktu 20-40 menit. Ukuran diameter nanoselulosa terkecil sebesar 5-10 nm, didapatkan dengan proses hidrolisis asam menggunakan H2SO4 30% pada suhu 60°C selama 120 menit. Nanoselulosa dapat digunakan sebagai filler dalam pembuatan tisu toilet, karena dapat menghasilkan rongga yang dapat menyerap molekul air dan meningkatkan kekuatan lapisan kertas. Tissue is a type of paper, made from wood fibers. The elevation of tissue necessity in the society will rise the trees logging. Oil palm empty fruit bunches (OPEFB) is waste from oil palm mill which contains high cellulose and has a lot of potential to be used, one of that is as a filler in the manufacture of tissue. The literature review was conducted to determine the potential utilization of cellulose in OPEFB as a filler in the manufacture of toilet paper. According to the requirements, the material for tissue is expected to have a cellulose content of 70%. Estimation of optimum cellulose content with delignification was determined by linear regression using SPSS Statistics 25 software. The optimum delignification results were obtained at a temperature of 150-1600C, NaOH 15-17.5%, and 20-40 minutes. The lowest diameter of nanocellulose is 5-10 nm, obtained by acid hydrolysis using 30% H2SO4 at 600C for 120 minutes. The nanocellulose is used as a filler in the manufacture of toilet paper, because it can produce holes that can absorb water molecules and increase the strength of the paper layer.

Nanocellulose Production from Empty Palm Oil Fruit Bunches (EPOFB) Using Hydrolysis Followed by Freeze Drying Irwan Hidayatulloh; Emmanuela Maria Widyanti; Endang Kusumawati; Lidya Elizabeth
ASEAN Journal of Chemical Engineering Vol 21, No 1 (2021)
Publisher : Department of Chemical Engineering, Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/ajche.61093

Empty palm oil fruit bunches (EPOFB) are lignocellulose which is abundantly available in Indonesia. EPOFB has big potential as raw materials to substitute wood in nanocellulose manufacture. The production of nanocellulose from EOPFB consists of various stages, such as preparation by grinding and sizing, α-cellulose isolation, acid hydrolysis, and freeze-drying. α-cellulose isolate from POEFB through delignification using 17.5% NaOH (w / v) at 80oC for 30 minutes and bleaching using 10% H2O2 (v / v) at 70oC for 15 minutes. The bleached cellulose was then hydrolyzed by acid hydrolysis process using 64% H2SO4 for 45 minutes with temperature variations to determine the effect of temperature on the size of nanocellulose. Obtained nanocellulose then dried with the freeze-drying method at a temperature of 50oC for 6 hours. The nanocellulose morphology was characterized using SEM analysis, and FTIR analysis was done to determine the presence of cellulose and lignin. The smallest average diameter obtained at 50oC temperature is 86.8 nm with a 51.5 – 66.5 nm distribution range.

PENGARUH LAJU ALIR DAN WAKTU INJEKSI UDARA TERHADAP PERSEN PEROLEHAN PADA EKSTRAKSI EMAS (Au) DAN PERAK (Ag) Ayu Ratna Permanasari; Emmanuela Maria Widyanti; Dwi Nirwantoro Nur; Khoirin Najiyyah Sably; Novita Deni
Prosiding Industrial Research Workshop and National Seminar Vol 9 (2018): Industrial Research Workshop and National Seminar
Publisher : Politeknik Negeri Bandung

Konsentrasi oksigen terlarut merupakan salah satu faktor yang berperan penting dalam proses sianidasi, selain konsentrasi sianida. Kurangnya pasokan oksigen kedalam slurry dapat menyebabkan rendahnya nilai perolehan emas (Au) dan perak (Ag) karena oksigen terlarut yang dihasilkan rendah. Tujuan penelitian ini yaitu untuk mengetahui pengaruh laju alir udara terhadap nilai oksigen terlarut dan waktu penginjeksian udara terhadap perolehan Au dan Ag. Dilakukan tahapan persiapan dengan mencari laju alir udara terbaik dengan mengalirkan udara pada slurry yaitu 20, 30, 40 lpm, selanjutnya slurry disianidasi dengan variasi waktu injeksi udara 2,3,4 jam, pH 10.5-11, NaCN 500ppm. Masing-masing dilihat dari kadar oksigen terlarut yang paling tinggi. Dari hasil laju alir terbaik dan waktu injeksi terbaik, maka dilakukan sianidasi lagi terhadap slurry dengan kondisi operasi yang sama. Berdasarkan hasil penelitian, laju alir optimum udara yang didapatkan yaitu 20 liter per menit (lpm) dengan rata-rata nilai oksigen terlarut yang dihasilkan sebesar 8,11 ppm, dan waktu penginjeksian udara optimum yang didapatkan untuk ekstraksi emas (Au) selama 4 jam dan perolehan Ag (perak) selama 8 jam proses sianidasi, dengan persen perolehan masing-masing sebesar 72,11% dan 75,54 %.

STUDI LITERATUR PENGARUH KONDISI OPERASI FRAKSIONASI TKKS DENGAN PROSES ORGANOSOLV TERHADAP KADAR SELULOSA DAN LIGNIN Sindy Rizkia Salsabila; Ahya Siti Hasanah; Emmanuela Maria Widyanti; Lidya Elizabeth
Prosiding Industrial Research Workshop and National Seminar Vol 12 (2021): Prosiding 12th Industrial Research Workshop and National Seminar (IRWNS)
Publisher : Politeknik Negeri Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (372.903 KB)

STUDI LITERATUR PENGARUH KONDISI OPERASI FRAKSIONASI TKKS DENGAN PROSES ORGANOSOLV TERHADAP KADAR SELULOSA DAN LIGNIN

Studi Literatur Penentuan Jenis ILs serta Kondisi Operasi Optimum pada Fraksionasi TKKS Fifi Yani; Tasya Shafira Widjaya; Lidya Elizabeth; Emmanuela Maria Widyanti
Prosiding Industrial Research Workshop and National Seminar Vol 12 (2021): Prosiding 12th Industrial Research Workshop and National Seminar (IRWNS)
Publisher : Politeknik Negeri Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (258.627 KB)

Studi Literatur Penentuan Jenis ILs serta Kondisi Operasi Optimum pada Fraksionasi TKKS

Pengaruh Konsentrasi Gliserol dalam Edible Coating Tepung Biji Nangka dengan Penambahan Plasticizer Gliserol Emmanuela Maria Widyanti; Nancy Siti Djenar; Ari Marlina; Endang Widiastuti; Irwan Hidayatulloh; Intan Puspitarini; Dhara Firdausa; Lidya Elizabeth
Fluida Vol 15 No 2 (2022): FLUIDA
Publisher : Department of Chemical Engineering, Politeknik Negeri Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35313/fluida.v15i2.4419

Tomatoes are horticultural plants that are easily damaged, need to be coated with a food grade edible coating. The basic ingredients that can be used are polysaccharides, derived from jackfruit seed flour, then glycerol plasticizer is added to improve the brittle nature of the edible coating. The maximum glycerol added was carried out with the following concentration variations: control (without glycerol), 1.5%, 2.0%, 2.5%. The analysis carried out included testing the respiration rate and weight loss in tomato storage for 6 days. In determining the respiration rate, an experiment was carried out by flowing 1 L/minute of air for 2 minutes which had been passed through a saturated Ca(OH)2 solution flowed into a jar containing tomatoes, passing through a 0.05 N NaOH solution added 0.1% phenophthalein indicator and titrated with HCl 0.05 N until the red color disappears and the weight loss decreases on tomatoes coated with edible coating. The results obtained were the lowest decrease in respiration rate at 2% glycerol concentration of 0.137 mgCO2/kg.hour and the lowest decrease in weight loss at 2.5% glycerol concentration of 1.913%.

Kajian Pustaka Sintesis Nanoselulosa dari Tandan Kosong Kelapa Sawit sebagai Filler Pembuatan Tisu Toilet Irwan Hidayatulloh; Emmanuela Maria Widyanti; Chandra Aztaris; Awalum Melanitria; Lidya Elizabeth
Fluida Vol 15 No 1 (2022): FLUIDA
Publisher : Department of Chemical Engineering, Politeknik Negeri Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35313/fluida.v15i1.2711

Tisu merupakan salah satu jenis kertas yang terbuat dari serat kayu. Peningkatan kebutuhan tisu di masyarakat meningkatkan penebangan pohon. Tandan kosong kelapa sawit (TKKS) merupakan limbah dari kelapa sawit yang mengandung selulosa tinggi dan memiliki potensi untuk dimanfaatkan sebagai filler dalam pembuatan tisu. Penelaahan kajian pustaka ini dilakukan untuk mengetahui potensi pemanfaatan nanoselulosa TKKS sebagai filler pembuatan tisu toilet. Sesuai persyaratan, bahan untuk tisu diharapkan mempunyai kandungan selulosa 70 %. Perhitungan kadar selulosa optimum dengan delignifikasi ditentukan dari regresi linear menggunakan software SPSS Statistics 25. Rancangan variabel proses menggunakan software Minitab 19. Metode perancangan yang digunakan dalam percobaan adalah placket burman. Hasil delignifikasi optimum didapatkan pada suhu 150-160°C, NaOH 15-17,5%, dan waktu 20-40 menit. Ukuran diameter nanoselulosa terkecil sebesar 5-10 nm, didapatkan dengan proses hidrolisis asam menggunakan H2SO4 30% pada suhu 60°C selama 120 menit. Nanoselulosa dapat digunakan sebagai filler dalam pembuatan tisu toilet, karena dapat menghasilkan rongga yang dapat menyerap molekul air dan meningkatkan kekuatan lapisan kertas. Tissue is a type of paper, made from wood fibers. The elevation of tissue necessity in the society will rise the trees logging. Oil palm empty fruit bunches (OPEFB) is waste from oil palm mill which contains high cellulose and has a lot of potential to be used, one of that is as a filler in the manufacture of tissue. The literature review was conducted to determine the potential utilization of cellulose in OPEFB as a filler in the manufacture of toilet paper. According to the requirements, the material for tissue is expected to have a cellulose content of 70%. Estimation of optimum cellulose content with delignification was determined by linear regression using SPSS Statistics 25 software. The optimum delignification results were obtained at a temperature of 150-1600C, NaOH 15-17.5%, and 20-40 minutes. The lowest diameter of nanocellulose is 5-10 nm, obtained by acid hydrolysis using 30% H2SO4 at 600C for 120 minutes. The nanocellulose is used as a filler in the manufacture of toilet paper, because it can produce holes that can absorb water molecules and increase the strength of the paper layer.

Title

Found 7 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 7 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 7 Documents
Search