Claim Missing Document
Check
Articles

Found 8 Documents
Search
Journal : Eksergi: Chemical Engineering Journal

Effect of Bicarbonate, Iron, and Salt, on Lipid Productivity of Chlorella sp. Extracted by Osmotic Shock Method Muhamad Maulana Azimatun Nur
Eksergi Vol 11, No 2
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v11i2.366

Abstract

Fossil energy depletion in Indonesia can not be neglected. It is needed renewable energy that environmental friendly and meets demand consumption. One of promising biofuel in Indonesia is biodiesel. However lack of feedstock is main problem due to increasing of customer needs. Chlorella sp. is kind of microalgae that potential for biodiesel source. This research is purposed to optimize influence of bicarbonate, iron, and salt in growth, biomass, and lipid productivity of Chlorella sp. The research was done in 2^3 factorial design in 6 days. Cultivation was maintained in pH 6,2-7,4 and 6000 lux light intensity. Extraction was done by osmotic shock method using wet biomass. Result indicates that addition of bicarbonate and iron give possitive effect on lipid productivity. Addition of salt give possitive effect on biomass and growth rate.
Evaluation of C/N Ratio in Spirulina platensis Cultivation using Molasses Addition as Organic Carbon Source Tutik Muji Setyoningrum; Viska A.W.; Annisaturraihan A; N Islamy Putra; Muhamad Maulana Azimatun Nur
Eksergi Vol 11, No 2
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v11i2.375

Abstract

Growth of Spirulina platensis requiers nitrogen, phosphate, and carbon. Urea is used as source of nitrogen, TSP as source of phosphate, and sodium bicarbonate (NaHCO3) as source of carbon.  The purpose of this research was to evaluate C:N ratio of medium using different concentration of molase and urea addition as replacement of commercial medium. Spirulina platensis was cultivated  as a control consist of 1500 ppm NaHCO3 as source of carbon, 80 ppm urea as source oh nitrogen, 20 ppm TSP (Triple Super Phosphate) as source of phosphate, 1 ppm FeCl3 and 50 µg/l B12 vitamin as source of micronutrients. Spirulina platensis was cultivated in 2-liter of erlenmeyer flask with variation composition of urea and molasses in growth media by adding 20% (w/w) control medium. Urea was varied between 0; 16; and 80 mg L-1, molasses was varied at the level of 0,1-0,9 g L-1. Cultivation was maintained in pH 9-10, light intensity 6000-7000 lux and 280C. Mini aerator pump is used as a medium stirrer. The best result were obtained at the medium varied of 0,1 g L-1 and 16 ppm of urea with growth rate of  0.230 day-1 , C:N ratio 6.8, and dry biomass of 0.333 g L-1.
Effect of particle sizes and sodium hydroxide concentrations on silica extraction from minerals obtained in Kalirejo village, Kokap, Kulonprogo, Yogyakarta Tutik Muji Setyoningrum; Wibiana Wulan Nandari; Sri Wahyu Murni; Muhamad Maulana Azimatun Nur
Eksergi Vol 18, No 1 (2021)
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v0i0.4576

Abstract

Silica is mainly used in the production of rubber, glass, cement, glass, ceramics, paper, cosmetics, electronics, paintings, healthcare and other industries. Kalirejo village has a potential abundant resource of silica minerals. However, to refine it, high cost of extraction should be done to obtain high purity of silica. Different refining methods influence different purity of the silica. The purpose of this research was to study the refining process of mineral rock silica from Kalirejo village, Kokap, Kulonprogo by emplying simple and cheap solid-liquid extraction. Extraction was done by varying the particle size at 100 - 200 mesh, while NaOH concentration was varied in 0.5 N to 5 N.  Results showed that minerals taken from Kalirejo village was dominated by silica (23%).  The largest extract (4.89 gram) was obtained at 200 mesh and using NaOH 5 N with yield of 15.07%. Higher NaOH and higher particle size enhanced the extraction yield. This finding could help small communities in Kalirejo village to enhance the quality of silica by employing simple and cheap extraction process.
Potency of Microalgae as Source of Functional Food in Indonesia (Overview) Muhamad Maulana Azimatun Nur
Eksergi Vol 11, No 2
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v11i2.363

Abstract

Malnutrition in Indonesia continues to increase. It is needed to develop functional food source that is capable to be produced in rapid, feasible, sustainable, and meets the nutritional needs for the country. Microalgae is a type of single-celled plants, live in water by using photosynthesis to produce biomass. Microalgae such as Spirulina platensis has a high protein content. It also contains vitamins and pigments that is useful to the body. The potential of microalgae production in Indonesia is high considering that Indonesia passed the equator and has a supporting environment. Trends in the future, it is expected Indonesia could produce microalgae at high mass scale, at a cheap price and can be applied in everyday life.
Production of briquettes from Indonesia agricultural biomass waste by using pyrolysis process and comparing the characteristics Sri Wahyu Murni; Tutik Muji Setyoningrum; Muhamad Maulana Azimatun Nur
Eksergi Vol 18, No 1 (2021)
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v0i0.4572

Abstract

Indonesia biomass waste is a potential feedstock as a source of renewable energy since it can be converted into carcoal briquettes. However, the production of the briquettes using pyrolysis process using the agricultural waste was lacking. In this research, briquette was made from palm shells,  corncob and soybean stem wood due to its high availability and have high cellulose content. The purpose of this research was to produce briquettes from three kind of raw materials by employing pyrolysis process and compared the characteristics. The briquette was made from different type of raw materials (palm shells, corncob and soybean stem) and  the concentration of binder : 3-7 %. Pyrolysis was done at  500 °C, and 100 kg / cm2 of pressing pressure. Results showed that, the best charcoal briquette was achieved from palm shells by using 5% binder, which resulted 4,1% moisture content, 3.4% ash content,  15% volatile matter content, 77.5% carbon content,  7075 cal/g calorific value and  1.4 kg/cm2 compresive strength. It is found that the concentration of binder and raw material influenced the quality of the briquettes. In overall, the production of the briquettes by employing pyrolysis method could meet the standard.
Potensi Spirulina platensis sebagai sumber kosmetik dan bioplastik (review) Muhamad Maulana Azimatun Nur; Tutik Muji Setyoningrum; Halim Nur Aziz Suwardi; Bety Alfitamara; Adi Kurniawan; Vinka Azzah Prananda; Dwi Nur Afni; Sheila Alodia; Retno Pamularsih
Eksergi Vol 18, No 2 (2021)
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v18i2.5660

Abstract

Spirulina plantesis is a cyanobacteria that has many purposes such as for cosmetics, and food industry. In addition, Spirulina platensis can accumulate polyhydroxybutyrate (PHB), a type of bioplastic. This review discussed the potency of Spirulina platensis as a source of bioplastics and cosmetics. From the review, Spirulina contained bioactive compound, C-phycocyanin, which can inhibit cell damage and is very potential to be applied for cosmetics. The PHB content in Spirulina tends to be small compared to other microalgae. To reduce the cost of PHB from Spirulina, the biorefinery concept can be applied, by recovery the bioactive components (C-phycocyanin), while the residue can be used as a source of PHB.
Pengaruh Pelarut, Rasio Pelarut, dan Waktu Ekstraksi Terhadap Astaxanthin dari Haematococcus sp. dengan Bantuan Ultrasound Assisted Extraction Putri, Wilda Ayu; Al Maqsidi, Muhammad Ariq; Achmad, Zubaidi; Hadi, Faizah; Nur, Muhamad Maulana Azimatun
Eksergi Vol 20, No 3 (2023)
Publisher : Prodi Teknik Kimia, Fakultas Teknologi Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v20i3.10733

Abstract

Indonesia merupakan negara kepulauan dengan keanekaragaman hayati sehingga memilliki potensi bagi perairan Indonesia untuk mikroalga dapat tumbuh dan berkembang. Mikroalga Haematococcus sp. dikenal mengandung senyawa karotenoid, khususnya senyawa astaxanthin. Astaxanthin berkhasiat sebagai antioksidan yang dapat dimanfaatkan sebagai suplemen kesehatan. Penelitian ini bertujuan untuk mengetahui pengaruh jenis pelarut, volume pelarut, dan lama waktu ekstraksi terhadap kadar astaxanthin. Ekstraksi dilakukan dengan metode Ultrasound Assisted Extraction (UAE). Penelitian ini menggunakan metode percobaan dengan Rancangan Acak Lengkap (RAL) factorial dengan tiga variabel bebas yaitu jenis pelarut, volume pelarut dan waktu ekstraksi pada proses ekstraksi. Pada penelitian ini dilakukan analisis kadar astaxanthin dalam Haematococcus sp.yang diperoleh dari hasil kultivasi sendiri, kemudian dilakukan pengukuran kadar astaxanthin menggunakan spektrofotometri UV-Vis pada panjang gelombang 478 nm. Hasil pengukuran menunjukkan kadar astaxanthin tertinggi pada variasi pelarut aseton dengan volume 10 ml lama waktu 25 menit sebesar 0,0677%. 
Pengaruh Pelarut, Rasio Pelarut, dan Waktu Ekstraksi Terhadap Astaxanthin dari Haematococcus sp. dengan Bantuan Ultrasound Assisted Extraction Putri, Wilda Ayu; Al Maqsidi, Muhammad Ariq; Achmad, Zubaidi; Hadi, Faizah; Nur, Muhamad Maulana Azimatun
Eksergi Vol 20 No 3 (2023)
Publisher : Prodi Teknik Kimia, Fakultas Teknik Industri, UPN "Veteran" Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31315/e.v20i3.10733

Abstract

Indonesia merupakan negara kepulauan dengan keanekaragaman hayati sehingga memilliki potensi bagi perairan Indonesia untuk mikroalga dapat tumbuh dan berkembang. Mikroalga Haematococcus sp. dikenal mengandung senyawa karotenoid, khususnya senyawa astaxanthin. Astaxanthin berkhasiat sebagai antioksidan yang dapat dimanfaatkan sebagai suplemen kesehatan. Penelitian ini bertujuan untuk mengetahui pengaruh jenis pelarut, volume pelarut, dan lama waktu ekstraksi terhadap kadar astaxanthin. Ekstraksi dilakukan dengan metode Ultrasound Assisted Extraction (UAE). Penelitian ini menggunakan metode percobaan dengan Rancangan Acak Lengkap (RAL) factorial dengan tiga variabel bebas yaitu jenis pelarut, volume pelarut dan waktu ekstraksi pada proses ekstraksi. Pada penelitian ini dilakukan analisis kadar astaxanthin dalam Haematococcus sp.yang diperoleh dari hasil kultivasi sendiri, kemudian dilakukan pengukuran kadar astaxanthin menggunakan spektrofotometri UV-Vis pada panjang gelombang 478 nm. Hasil pengukuran menunjukkan kadar astaxanthin tertinggi pada variasi pelarut aseton dengan volume 10 ml lama waktu 25 menit sebesar 0,0677%.