Article Per Year (5 Year)
p-Index From 2020 - 2025
1.204
P-Index
This Author published in this journals
All Journal Jurnal Manajemen Teknologi dan Teknik Sipil (JURMATEKS)
Muhammad Heri Nastotok
Faculty of Engineering, Kadiri University
Civil Engineering, Building, Construction & Architecture Electrical & Electronics Engineering Engineering Transportation

Published : 8 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 8 Documents
Search

 1 
Peningkatan Daya Dukung Tiang pada Gedung Permata Indah Nganjuk Menggunakan Metode Trofimankove Muchammad Sutikno; Edy Gardjito; Agata Iwan Candra; Fitry Rahmawaty; Muhammad Heri Nastotok
Jurnal Manajemen Teknologi & Teknik Sipil Vol 4, No 1 (2021): JUNE
Publisher : Faculty of Engineering, Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2540.857 KB) | DOI: 10.30737/jurmateks.v4i1.1692

Abstract

The function of the foundation as a substructure that transmits the load received from the upper structure of the building into the foundation makes the foundation have an important role. The strength of the foundation is something that needs to be planned properly. This planning aims to plan the foundation for the Permata Indah Building, Nganjuk Regency, which will later be used as a boarding house building. Planning that is carried out includes selecting the type of foundation, calculation of dimensions, and foundation reinforcement. Based on soil investigation results, the foundation type pile was chosen because the hard soil was located at a depth of 17 m. The method used to calculate the bearing capacity of the pile includes the Meyerhoff, Begemann, and Trofimankove methods. With a diameter of 30 cm and 4 poles, the carrying capacity of group piles (Pg) was obtained using the Meyerhoff method of 224.60 tons, the Begemann Method of 199.59, and the Trophimankove Method of 259.36 tons. From these results, the group pile bearing capacity value is still greater than the value of ƩVu= 146.28 tonnes. Meanwhile, for a single pile settlement Se= 2.13cm <Sijin= 3 cm SAFE and a pile settlement group Sg= 3.98cm.
Penambahan Abu Jerami Dan Abu Sekam pada Beton Fc’ 18,68 Mpa untuk Meningkatkan Kuat Tekan Beton Alvin Hidayat; Agata Iwan Candra; Sigit Winarto; Muhammad Heri Nastotok
Jurnal Manajemen Teknologi & Teknik Sipil Vol 4, No 1 (2021): JUNE
Publisher : Faculty of Engineering, Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (3701.049 KB) | DOI: 10.30737/jurmateks.v4i1.1642

Abstract

Concrete is a material that is widely used in the construction sector. The use of sustainable concrete constituent materials will result in the depletion of these materials. That is a need for innovation in the use of concrete materials. Husk ash and straw ash contain silica contained in cement material. Further research is needed on the use of these materials. This research was conducted to determine the optimum compressive strength, moisture content, and concrete density of a mixture of husk ash and straw ash in concrete k-225 (Fc '18.68 Mpa) with variations of 0%, 5%, 10%, and 15% of weight cement. The specimens used are 15x30cm cylindrical and the test is carried out at 28 days of concrete. The results showed that the optimum compressive strength value was obtained in the addition of 5% with a compressive strength value of fc'22.5 MPa. The least water content value is in the addition of 10% with a value of 0.033kg. The specific gravity test results show that the value of specific gravity has decreased for each variation. So it can be concluded that the addition of husk ash and straw ash to the concrete mixture affects the compressive strength value.
Menentukan Desain Struktur Atas Gedung Fajar Biru Trenggalek Berdasarkan SNI (Standart Nasional Indonesia) Alfin Dino Saputra; Edy Gardjito; Sigit Winarto; Muhammad Heri Nastotok; Faiz Muhammad Azhari
Jurnal Manajemen Teknologi & Teknik Sipil Vol 4, No 2 (2021): OCTOBER
Publisher : Faculty of Engineering, Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2295.483 KB) | DOI: 10.30737/jurmateks.v4i2.2002

Abstract

A multi-storey reinforced concrete building is very prone to collapse. Therefore, proper structural planning is needed in order to qualify the strength and security of the structure. Fajar Biru Building is a building that will be built in Karangsuko village of Trenggalek Regency, East Java. The building functioned as a cost with a building area of 340 m2, and has a total of 4 floors. The method used is the SRPMM (Medium Moment Musician Frame System) method which refers to SNI 1726:2012, and SNI 2847:2013. Planning includes the calculation of beams, floor plates, and columns. From the results of the calculations that have been done. on the floor plate structure with a plate thickness of 120 mm, Ø12 tree bones are used with a distance of 100 mm for pedestals and 150 mm for field areas. On the looping of B1 beams with dimensions of 300x350 mm used 6-D16 tree bones for focus and 4-D16 for field areas with Ø10-70 mm for focus and Ø10-140 mm for field areas. For the repeating of Column K1 with dimensions of 300x600 mm used 10-D16 principal bones with a Ø10-70 mm dimension. So that from these results can be used as a reference in the implementation of the construction of the blue dawn building.
Desain Struktur Atas Gedung Rawat Inap 3 Lantai RSUD Nganjuk Menggunakan Standart Nasional Indonesia (SNI) Ines Indria Wati; Edy Gardjito; Sigit Winarto; Muhammad Heri Nastotok; Imam Mustofa
Jurnal Manajemen Teknologi & Teknik Sipil Vol 4, No 2 (2021): OCTOBER
Publisher : Faculty of Engineering, Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2678.361 KB) | DOI: 10.30737/jurmateks.v4i2.2067

Abstract

The hospital building is one of the building facilities that is developed continuously. The building was built as an effort to fulfill health facilities. In its construction, the hospital building must be properly planned so that it is safe to use. Planning includes the design and calculation of structural details. Several hospitals in the Nganjuk area added building units to meet the needs of the community, one of which was the Nganjuk Hospital which added a building to support services. Planning a multi-storey building is a solution because it will be able to accommodate many patients. This plan aims to plan the structure of the Nganjuk Regional General Hospital Building. The planning carried out includes the calculation of structural dimensions, calculation of loading, and calculation of reinforcement which were analyzed using SAP2000 software. The calculation results show that the dimensions of the columns used are 40/40 and 15/15 for practical columns, the dimensions of the beams are 35/50 and 30/40 and 25/35. Reinforcement on beams obtained diameters of 16 and 10 mm, reinforcement on columns obtained diameters of 19 and 10 mm, while on plates obtained diameters of 10 mm. Thus, these results can be used as a reference in the implementation of the construction of the Nganjuk Regional General Hospital Building.
Penambahan Abu Jerami Dan Abu Sekam pada Beton Fc’ 18,68 Mpa untuk Meningkatkan Kuat Tekan Beton Alvin Hidayat; Agata Iwan Candra; Sigit Winarto; Muhammad Heri Nastotok
Jurnal Manajemen Teknologi & Teknik Sipil Vol. 4 No. 1 (2021): JUNE
Publisher : Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jurmateks.v4i1.1642

Abstract

Concrete is a material that is widely used in the construction sector. The use of sustainable concrete constituent materials will result in the depletion of these materials. That is a need for innovation in the use of concrete materials. Husk ash and straw ash contain silica contained in cement material. Further research is needed on the use of these materials. This research was conducted to determine the optimum compressive strength, moisture content, and concrete density of a mixture of husk ash and straw ash in concrete k-225 (Fc '18.68 Mpa) with variations of 0%, 5%, 10%, and 15% of weight cement. The specimens used are 15x30cm cylindrical and the test is carried out at 28 days of concrete. The results showed that the optimum compressive strength value was obtained in the addition of 5% with a compressive strength value of fc'22.5 MPa. The least water content value is in the addition of 10% with a value of 0.033kg. The specific gravity test results show that the value of specific gravity has decreased for each variation. So it can be concluded that the addition of husk ash and straw ash to the concrete mixture affects the compressive strength value.
Peningkatan Daya Dukung Tiang pada Gedung Permata Indah Nganjuk Menggunakan Metode Trofimankove Muchammad Sutikno; Edy Gardjito; Agata Iwan Candra; Fitry Rahmawaty; Muhammad Heri Nastotok
Jurnal Manajemen Teknologi & Teknik Sipil Vol. 4 No. 1 (2021): JUNE
Publisher : Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jurmateks.v4i1.1692

Abstract

The function of the foundation as a substructure that transmits the load received from the upper structure of the building into the foundation makes the foundation have an important role. The strength of the foundation is something that needs to be planned properly. This planning aims to plan the foundation for the Permata Indah Building, Nganjuk Regency, which will later be used as a boarding house building. Planning that is carried out includes selecting the type of foundation, calculation of dimensions, and foundation reinforcement. Based on soil investigation results, the foundation type pile was chosen because the hard soil was located at a depth of 17 m. The method used to calculate the bearing capacity of the pile includes the Meyerhoff, Begemann, and Trofimankove methods. With a diameter of 30 cm and 4 poles, the carrying capacity of group piles (Pg) was obtained using the Meyerhoff method of 224.60 tons, the Begemann Method of 199.59, and the Trophimankove Method of 259.36 tons. From these results, the group pile bearing capacity value is still greater than the value of Æ©Vu= 146.28 tonnes. Meanwhile, for a single pile settlement Se= 2.13cm <Sijin= 3 cm SAFE and a pile settlement group Sg= 3.98cm.
Menentukan Desain Struktur Atas Gedung Fajar Biru Trenggalek Berdasarkan SNI (Standart Nasional Indonesia) Alfin Dino Saputra; Edy Gardjito; Sigit Winarto; Muhammad Heri Nastotok; Faiz Muhammad Azhari
Jurnal Manajemen Teknologi & Teknik Sipil Vol. 4 No. 2 (2021): OCTOBER
Publisher : Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jurmateks.v4i2.2002

Abstract

A multi-storey reinforced concrete building is very prone to collapse. Therefore, proper structural planning is needed in order to qualify the strength and security of the structure. Fajar Biru Building is a building that will be built in Karangsuko village of Trenggalek Regency, East Java. The building functioned as a cost with a building area of 340 m2, and has a total of 4 floors. The method used is the SRPMM (Medium Moment Musician Frame System) method which refers to SNI 1726:2012, and SNI 2847:2013. Planning includes the calculation of beams, floor plates, and columns. From the results of the calculations that have been done. on the floor plate structure with a plate thickness of 120 mm, Ø12 tree bones are used with a distance of 100 mm for pedestals and 150 mm for field areas. On the looping of B1 beams with dimensions of 300x350 mm used 6-D16 tree bones for focus and 4-D16 for field areas with Ø10-70 mm for focus and Ø10-140 mm for field areas. For the repeating of Column K1 with dimensions of 300x600 mm used 10-D16 principal bones with a Ø10-70 mm dimension. So that from these results can be used as a reference in the implementation of the construction of the blue dawn building.
Desain Struktur Atas Gedung Rawat Inap 3 Lantai RSUD Nganjuk Menggunakan Standart Nasional Indonesia (SNI) Ines Indria Wati; Edy Gardjito; Sigit Winarto; Muhammad Heri Nastotok; Imam Mustofa
Jurnal Manajemen Teknologi & Teknik Sipil Vol. 4 No. 2 (2021): OCTOBER
Publisher : Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jurmateks.v4i2.2067

Abstract

The hospital building is one of the building facilities that is developed continuously. The building was built as an effort to fulfill health facilities. In its construction, the hospital building must be properly planned so that it is safe to use. Planning includes the design and calculation of structural details. Several hospitals in the Nganjuk area added building units to meet the needs of the community, one of which was the Nganjuk Hospital which added a building to support services. Planning a multi-storey building is a solution because it will be able to accommodate many patients. This plan aims to plan the structure of the Nganjuk Regional General Hospital Building. The planning carried out includes the calculation of structural dimensions, calculation of loading, and calculation of reinforcement which were analyzed using SAP2000 software. The calculation results show that the dimensions of the columns used are 40/40 and 15/15 for practical columns, the dimensions of the beams are 35/50 and 30/40 and 25/35. Reinforcement on beams obtained diameters of 16 and 10 mm, reinforcement on columns obtained diameters of 19 and 10 mm, while on plates obtained diameters of 10 mm. Thus, these results can be used as a reference in the implementation of the construction of the Nganjuk Regional General Hospital Building.
Co-Authors Agata Iwan Candra Alfin Dino Saputra Alvin Hidayat Edy Gardjito, Edy Faiz Muhammad Azhari Fitry Rahmawaty Imam Mustofa Imam Mustofa Ines Indria Wati Muchammad Sutikno Sigit Winarto