Lintje Tammu Tangdialla
Universitas Kristen Indonesia Paulus

Published : 4 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 4 Documents
Search

Produktivitas Alat Berat Pengecoran Kolom pada Pembangunan Apartemen 31 Sudirman Suites Makassar Fedelia Randan; Junus Mara; Lintje Tammu Tangdialla
Paulus Civil Engineering Journal Vol 3 No 3 (2021): PCEJ, Vol.3, No.3, 2021
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (568.5 KB) | DOI: 10.52722/pcej.v3i3.280

Abstract

In the world of heavy equipment construction projects it is important to help complete human work. Tower Crane is one of the tools in the implementation of construction projects. In the implementation of the construction of Apartment 31 Sudirman Suites Makassar, there are 2 Tower Crane tools that operate with limited work time due to covid 19. This research was carried out by direct observation in the field and calculating the real value of the specifications to compare productivity. Tower Crane productivity is the result achieved or output, namely the amount of material moved by Tower Crane with all resources or inputs, namely the time required for material transfer. Based on the calculation results that the productivity of the specification is greater than the productivity of observations in the field, this is due to constraints on the weather that occurs and the equipment operator. For productivity, the average obtained on the 4th floor is 71,544 (%) and on the 5th floor it is obtained that is 73,727 (%).
Analisis Peralatan Beton Ready Mix Pada Pekerjaan Pengecoran Balok Dan Lantai Proyek Gedung Education Center FISIP UNHAS Jeri Anditia. S; Junus Mara; Lintje Tammu Tangdialla
Paulus Civil Engineering Journal Vol 4 No 2 (2022): Paulus Civil Engineering Journal Volume 4 No.2
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (394.591 KB) | DOI: 10.52722/pcej.v4i2.457

Abstract

In the casting work of beams and plates on the 8th floor of the unhas FISIP Education Center building construction project using ready mix concrete produced in batching plants with dry mixed type which is then distributed to the project site using Hino Ranger FM 260 JM truck mixer capacity of 7 m3. The casting process uses a concrete pump tool with the IHI IPF100B-6N29 model with a capacity of 10-100 m3. This research was conducted to find out the effectiveness of the equipment used. From the results of the analysis conducted it can be known that the composition of the equipment used experienced a loss of production, especially in the truck mixer so that idle time occurred on the tool, therefore correction was made and from the results of calculations carried out it was proposed to reduce 3 units of truck mixers that previously there were 11 units used. Truck mixer reduction is done to reduce idle time on the equipment so that the tool can work more efficiently. From the results of research that has been done, it can be concluded that the composition of the equipment used has lost production, especially in truck mixers. Once corrected, it is proposed that the composition of the equipment is effective by reducing the use of truck mixers so as to reduce the waiting time (idle time) for pumping so that the performance of the tool can work more optimally.
Pengaruh Penambahan Fiber Pada Tanah Terhadap Nilai CBR Novelia Yuni Pangarungan; Meti; Lintje Tammu Tangdialla
Paulus Civil Engineering Journal Vol 5 No 2 (2023): Paulus Civil Engineering Journal, Volume 5, No.2
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52722/pcej.v5i2.645

Abstract

One alternative to stabilize the soil is mixing fiber with soil. This study aims to determine the effect of adding fiber to the soil on the CBR value. The land was taken from the Tambasa road area, Tamalanrea District, Makassar City. Then, feature testing and compaction testing (standard proctor) were carried out to obtain optimum water content and after that proceed to CBR (Unsoaked design) testing. The results showed that the characteristics of the soil including clay and CBR testing on both samples obtained CBR values ​​increased with the addition of 0.5% fiber and decreased with the addition of 0.75% and 1% fiber. From the research results, it is known that the more fiber added to the soil, the CBR value will decrease.
Pengaruh Penambahan Fiber Pada Tanah Terhadap Nilai CBR Lintje Tammu Tangdialla; Meti; Novelia Yuni Pangarungan
Paulus Civil Engineering Journal Vol 5 No 3 (2023): Paulus Civil Engineering Journal Volume 5, No.3
Publisher : Program Studi Teknik Sipil UKI Paulus-Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52722/pcej.v5i3.707

Abstract

One alternative to stabilize the soil is mixing fiber with soil. This study aims to determine the effect of adding fiber to the soil on the CBR value. The land was taken from the Tambasa road area, Tamalanrea District, Makassar City. Then, feature testing and compaction testing (standard proctor) were carried out to obtain optimum water content and after that proceed to CBR (Unsoaked design) testing. The results showed that the characteristics of the soil including clay and CBR testing on both samples obtained CBR values ​​increased with the addition of 0.5% fiber and decreased with the addition of 0.75% and 1% fiber. From the research results, it is known that the more fiber added to the soil, the CBR value will decrease.