Claim Missing Document
Check
Articles

Found 7 Documents
Search

Potensi Energi Listrik Dari Limbah Cair Pabrik Kelapa Sawit Di Kabupaten Kampar Purnama Irwan; Adi Febrianton
Jurnal Sains dan Ilmu Terapan Vol. 5 No. 2 (2022): Desember : Jurnal Sains dan Ilmu Terapan
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (643.528 KB) | DOI: 10.59061/jsit.v5i2.84

Abstract

Penelitian ini dilakukan untuk mengetahui seberapa besar potensi energi listrik yang dapat dihasilkan oleh limbah cair pabrik kelapa sawit (POME) sebagai energi terbarukan. Fokus penelitian ini dimulai dari pengumpulan data dari berbagai sumber tentang limbah cair yang dihasilkan oleh pabrik-pabrik kelapa sawit di Kabupaten Kampar. Kemudian akan dilakukan analisa terhadap potensi biogas dan energi listrik yang dapat dihasilkan dari limbah cair tersebut. Adapun data yang dibutuhkan diantaranya jumlah pabrik kelapa sawit (PKS) yang beroperasi di Kabupaten Kampar, kapasitas pengolahan tandan buah segar (TBS) dari masing-masing PKS, serta limbah cair yang dihasilkan PKS-PKS tersebut. Metode pengumpulan data tersebut dilakukan dengan melakukan survei ke lokasi PKS dan pencarian informasi di website. Hasil penelitian ini diharapkan dapat menjadi rujukan dalam merancang pembangkit listrik tenaga biogas (PLTBg) di Kabupaten Kampar. Dengan adanya PLTBg ini diharapkan dapat membatu pemerintah dalam menyediakan energi listrik bagi masyarakat, terutama masyarakat yang berada jauh dari akses listrik PLN. Selain itu penelitian ini juga dapat membantu PKS-PKS dalam mengolah limbah cair mereka menjadi lebih bermanfaat serta ramah lingkungan.
Pengaruh Media Pendingin PKO Terhadap Kekuatan Tarik Hasil Pengelasan SMAW Pada Baja S45C Indah Purnama Putri; Adi Febrianton
Jurnal Rekayasa Proses dan Industri Terapan Vol. 1 No. 4 (2023): November: Jurnal Rekayasa Proses dan Industri Terapan ( REPIT )
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59061/repit.v1i4.477

Abstract

The use and utilization of steel in the industrial world is very extensive because steel has unique properties, especially its strength. All tooling equipment cannot be separated from the engineering process and repair in the event of damage, namely by welding. One of the things that must be considered in welding is the cooling process. The purpose of the research was conducted to determine the effect of the cooling process on welding on the tensile strength of medium carbon steel using palm waste as a cooling medium. Tensile test samples were made with 3 variations of cooling media (PKO 100%, PKO75%, PKO 50%) using a HUNG TA HT-8503 machine. The highest tensile strength value was obtained from the 75% PKO variation with a tensile strength value of 345.58 Mpa. While the lowest tensile strength value is obtained from the 50% PKO variation with a tensile strength value of 232.28 Mpa.
Peningkatan Kompetensi CAD Bagi Siswa SMK Melalui Pelatihan Static Simulation Menggunakan Solid Works Widya Sinta Mustika; Romiyadi Romiyadi; Yudi Dwianda; Adi Febrianton; Irwan, Purnama; Indah Purnama Putri
Indonesia Bergerak : Jurnal Hasil Kegiatan Pengabdian Masyarakat Vol. 2 No. 2 (2024): April : Indonesia Bergerak: Jurnal Hasil Kegiatan Pengabdian Masyarakat
Publisher : Asosiasi Riset Ilmu Teknik Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61132/inber.v2i2.219

Abstract

Vocational education in the senior level, namlely Vocational High School (SMK), is designed to prepare graduates with high skills who are ready to compete in the work zone, both with competence and through entrepreneurship in order to face the demographic bonus. SMK Negeri 1 Bangkinang as a partner of the Politeknik Kampar has a major in the Mechanical Engineering. Generally, the major of Mechanical Engineering will be prepared in with competencies of Computer Aided Design (CAD). However, there are limitations to apply Solid Works software, which is currently in great demand in the industry. Therefore, the The major of Maintenance and Repair Engineering Politeknik Kampar participates in improving the competency of students at SMK Negeri 1 Bangkinang Kota through CAD Static Simulation Training activities using Solidworks Software. The training activity material contains an introduction to Solidworks, static simulation theory, namely stress, strain and deformation. At the end of the training activity session, an increase in partner competency was obtained regarding the use of Solid Works software in image creation and static simulation. Evaluation of activities through partner satisfaction questionnaires also found that partners were 100% satisfied with the PkM activities carried out.
Pemasangan Proteksi Kebocoran Arus Listrik pada Gedung Taman Kanak-Kanak (TK) Aisyah di Desa Muarajalai, Kecamatan Kampar Utara, Kabupaten Kampar Adi Febrianton; Romiyadi Romiyadi; Indah Purnama Puilltri; Widya Sinta Mustika; Purnama Irwan; Yudi Dwianda
ABDIMAS TERAPAN : Jurnal Pengabdian Kepada Masyarakat Terapan Vol. 2 No. 1 (2024): Juni :ABDIMAS TERAPAN: Jurnal Pengabdian Kepada Masyarakat Terapan
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59061/abdimasterapan.v2i1.754

Abstract

Electricity is the main requirement for every activity held at the Asiyah Kindergarten school. The Aisyah Kindergarten School building, located in Muarajalai Village, has good electrical installations, but maintenance is rarely carried out. Maintenance of electrical installations is very necessary, because over time the condition of the feasibility of electrical installations really needs to be paid attention to. One effort that can be made to maintain electricity is to install extra security equipment to overcome electric current leaks. In general, homes or schools usually only use MCBs, MCBs only function for protection in the event of an overload or short circuit. However, electric current leakage cannot be protected by MCB. It is necessary to additionally install an ELCB to detect electric current leaks, so that if someone is electrocuted, the ELCB will be able to work in less than 0.1 second to cut off the electric current. Apart from protecting humans, ELCB can also protect equipment that uses electricity from electric current leaks.
Pelatihan Instalasi Listrik Dasar Sebagai Upaya Peningkatan Keselamatan dan Kemandirian Ibu-Ibu PKK Dusun IV Desa Muarajalai Adi Febrianton; Romiyadi Romiyadi; Indah Purnama Putri; Widya Sinta Mustika; Purnama Irwan; Yudi Dwianda
ABDIMAS TERAPAN : Jurnal Pengabdian Kepada Masyarakat Terapan Vol. 3 No. 1 (2025): Juni: ABDIMAS TERAPAN: Jurnal Pengabdian Kepada Masyarakat Terapan
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59061/abdimasterapan.v3i1.947

Abstract

Electrical energy is a primary source of energy in daily life, with various electrical devices supporting human activities. Sometimes, electrical equipment experiences damage, with repair risks ranging from small to large scale. For damage with medium to large-scale risks, specialized experts are usually needed for repairs. However, damage to electrical installations with small-scale risks should be manageable by household members, especially housewives. Many housewives are afraid and do not understand how to handle electrical issues, even though they are active at home every day. Therefore, there is a need for training and counseling on simple electrical installations so that they can handle it confidently and safely. One form of training that can be provided is the creation of an electrical outlet set for PKK mothers in Muarajalai Village, Hamlet IV. This training aims to equip the PKK mothers with the skills and knowledge about tool specifications, tool functions, and safety procedures when using electrical equipment. With this training, it is hoped that they will be able to maintain and repair simple electrical installations at home without relying on experts, while also increasing their confidence and independence in handling everyday electrical problems.
Perancangan Sistem Kendali Untuk Penyiraman dan Pemupukan Lahan Pertanian Berbasis Smartphone Purnama Irwan; Romiyadi Romiyadi; Adi Febrianton; Purnama Putri, Indah; Dwianda, Yudi
Jurnal Sains dan Ilmu Terapan Vol. 8 No. 1 (2025): Jurnal Sains dan Ilmu Terapan
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59061/jsit.v8i1.888

Abstract

ChatGPT said: The processes of irrigation and fertilization in agriculture are time-consuming and physically demanding, as farmers typically irrigate twice daily and fertilize every three to four days. These repetitive tasks can lead to fatigue and reduced efficiency. To address this, we have developed an automated system for irrigation and fertilization that enables farmers to manage these activities remotely via smartphone. The system utilizes a microcontroller programmed based on specific agricultural needs and connected to the internet through Wi-Fi. This connectivity allows farmers to activate irrigation or fertilization with a single tap on their smartphones, anytime and from anywhere. The system aims to increase efficiency, reduce labor, and provide a more cost-effective and precise method of managing agricultural land. By automating routine tasks, farmers can better allocate their time and energy while ensuring optimal crop growth. The final outcome of this research is expected to be applicable directly in the field, allowing for real-world testing and refinement. Furthermore, the findings will be shared through a scientific publication to support knowledge.
Pelatihan Penerapan Standar K3 untuk Meningkatkan Keamanan dan Kesehatan Kerja pada UMKM Pengelasan di Desa Kampar Adi Febrianton; Purnama Irwan; Romiyadi, Romiyadi; Indah Purnama Putri; Yudi Dwianda; Widya Sinta Mustika
ABDIMAS TERAPAN : Jurnal Pengabdian Kepada Masyarakat Terapan Vol. 3 No. 2 (2025): Desember: ABDIMAS TERAPAN: Jurnal Pengabdian Kepada Masyarakat Terapan
Publisher : Politeknik Kampar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59061/abdimasterapan.v3i2.1254

Abstract

Occupational safety and health (K3) is very important to be applied in small and medium industries. In addition to reducing the risk of work accidents, the implementation of K3 can also provide benefits for the industry, such as increasing productivity, maintaining the quality of work results, and creating a safe and comfortable work environment. Kampar Village, Kampa District, has five MSMEs engaged in welding. Based on the survey, almost all of these MSMEs have not implemented the implementation of K3 properly, especially due to the lack of employee awareness in implementing safe work behavior. The lack of employee knowledge about the principles of K3 is also the cause of low concern for occupational safety. In addition, MSMEs have not provided complete personal protective equipment (PPE), so the risk of work accidents is higher. Therefore, training related to the implementation of K3 standards is needed to improve employee welfare while supporting the progress of MSMEs. This training is given to MSME owners in Kampar Village, Kampa District, so that they are able to implement K3 standards consistently and sustainably in welding business activities.