Kasim, Linda Mohd
Unknown Affiliation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Pyramidal microwave absorbers: leveraging ceramic materials for improved electromagnetic interference shielding Rosli, Nur Shafikah; Abdullah, Hasnain; Kasim, Linda Mohd; Abdullah, Samihah; Taib, Mohd Nasir; Kasim, Shafaq Mardhiyana Mohamat; Noor, Norhayati Mohd; Ahmad, Azizah
International Journal of Electrical and Computer Engineering (IJECE) Vol 15, No 1: February 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v15i1.pp435-447

Abstract

This study presents the development and optimization of pyramidal microwave absorbers designed for efficient electromagnetic interference (EMI) reduction in anechoic chambers. Based on prior research, this work transitions from conventional flat cement-carbon absorbers to a novel pyramidal design, incorporating silicon carbide (SiC) as ceramic materials. Introducing ceramic materials into the cement-carbon composite aims to enhance absorption across a broader frequency range while maintaining structural integrity. The study evaluates five sets of pyramidal absorbers with varying SiC content within the 1–12 GHz frequency range. Reflectivity performance was assessed using the naval research laboratory (NRL) Arch free space method at a 0° incidence angle. Among the tested absorbers, the set containing 10% SiC demonstrated superior performance, achieving minimum and maximum reflectivity values of -26.6215 and -55.2752 dB, respectively, particularly in the C-band. The findings highlight the significant impact of material composition and porosity on the absorber's effectiveness, providing valuable insights for the future design of high-performance EMI absorbers.
Investigation of microwave absorption performance of anti-radiation plastic cement brick Kasim, Linda Mohd; Idris, Hasnain Abdullah; Taib, Mohd Nasir; Noor, Norhayati Mohamad; Ahmad, Azizah; Ismail, Noor Azila; Kasim, Nazirah Mohamat; Anuar, Nur Qaisarah
International Journal of Electrical and Computer Engineering (IJECE) Vol 15, No 3: June 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v15i3.pp2900-2910

Abstract

The increasing demand for effective anti-microwave radiation materials motivates the exploration of sustainable and eco-friendly alternatives. This research investigates the microwave absorption properties of various brick compositions, including commercial brick (CB) and solid bricks (SB1, SB2 and SB3) incorporating recycled materials, polyethylene terephthalate (PET) and palm oil fuel ash (POFA). The dimension of the developed brick is 200×100×60 mm (length×width×height). The absorption performance of the bricks was measured in 100 mm and 60 mm thickness across the frequency range of 1 to 12 GHz using the naval research laboratory (NRL) free space arch method. At 100 mm thickness, SB3 shows the highest absorption up to-32.2061 dB at 1.98 GHz. At 60 mm thickness, SB1 achieved the maximum absorption at -57.6511 dB at 2.505 GHz. SB2 shows consistent average absorption performance at 15.2064 dB at 100 mm thickness and -19.5 dB at 60 mm thickness respectively. The compressive strength of the brick was measured, and it was shown that SB2 exhibited the highest average compressive strength of 7.17 MPa. Considering the standard wall thickness and brick strength, SB2 shows the most effective performance due to its enhanced composition and consistent performance across frequencies.