<![CDATA[Stockpiles are accumulations of materials such as coal or ore stored at specific locations. Accurate stockpile volume measurement is crucial in the mining and logistics industries for inventory management and cost efficiency. Conventional methods like Real-Time Kinematic (RTK) GPS rely on surface coordinate measurements but require numerous points, especially for irregular-shaped objects. Newer technologies like Terrestrial Laser Scanners (TLS) offer high-precision alternatives by capturing thousands of points per second, expediting and enhancing the resolution of volume measurements. This study compares TLS and RTK GPS methods in measuring the volume of andesite rock stockpiles at PT Bara Tabang. This research uses a quantitative approach, involving six Ground Control Points (GCPs) measured using the Sokkia GRX2 RTK GPS on October 24, 2024. TLS generated over 8.6 million point cloud data filtered down to 35,197 points, while RTK GPS yielded 2,276 coordinates. Accuracy testing showed very small RMSE values (RMSEr: 0.008 m; RMSEz: 0.007 m), and both LE90 and CE90 demonstrated 90% confidence within a 0.012 m range. Volume calculation using Surpac software with the cut and fill method showed TLS produced a volume of 18,766 bcm (51,982 tons/m³), while RTK GPS resulted in 18,694 bcm (51,782 tons/m³), with a difference of 72 bcm or 0.211%.These results indicate that both methods offer acceptable accuracy; however, TLS provides greater data density, efficiency, and precision, particularly for complex or large-scale stockpile objects. Therefore, TLS is recommended for high-accuracy volume measurement in mining operations that require efficiency and detailed analysis.]]>
Copyrights © 2025
