<![CDATA[This internship report discusses in depth the process of making Bracket Holder Type 51 parts using a stamping press machine carried out at PT. Persada Selaras Indonesia. This bracket holder component has an important function in the automotive system, namely as a support and binder between vehicle parts to remain stable and safe during operation. In the production process through the stages of the planning process including the materials used by SPHC and the creation of working drawings, setting dies with a height of 45 mm upper dies and 40 mm lower dies so a total of 85 mm, shearing process with a force of 46.31 tons, blanking process with a force of 15.04 tons, piercing process with a force of 0.795 tons, bending process with a force of 1.089 tons and conducting quality control to ensure the product meets standards or not. In the operation of the machine, a machine inspection is carried out first to minimize errors such as workplace inspection, dies inspection, die holder inspection, equipment configuration, according to work instructions. After the engine inspection is carried out, the engine is operated with the following steps: raise the handle to the ON position, check the engine headlights, pump grease, place the key on the star power in the ON position, press the green button on the main motor star, activate the emergency button, select the operational mode (foot or hand). This report is expected to be a reference in the development of manufacturing processes in the automotive industry, especially in the use of stamping press technology to produce high-quality components.]]>
Copyrights © 2026
