AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment)
Vol. 10 No. 3 (2026)

Synthesis and Characterization of Rigid Polyurethane Foam from Palm Oil-Derived Oleic Acid Polyol via Open Molding Process

Naufal Dzikri Musyaffa (Department of Chemical Engineering, UPN “Veteran” Jawa Timur, Surabaya, Indonesia)
Aldhila Ardalia Nella Angga (Department of Chemical Engineering, UPN “Veteran” Jawa Timur, Surabaya, Indonesia)
Suprihatin Suprihatin (Department of Chemical Engineering, UPN “Veteran” Jawa Timur, Surabaya, Indonesia)
Ketut Sumada (Department of Chemical Engineering, UPN “Veteran” Jawa Timur, Surabaya, Indonesia)
Sani Sani (Department of Chemical Engineering, UPN “Veteran” Jawa Timur, Surabaya, Indonesia)



Article Info

Publish Date
15 Oct 2026

Abstract

Oleic acid derived from palm oil contains a carbon–carbon double bond that can be converted into a polyol through epoxidation and hydroxylation, making it a promising renewable feedstock for rigid polyurethane foam. Polyurethane was synthesized by an open molding process, varying toluene diisocyanate (TDI) and polyethylene glycol (PEG-400) volumes from 10 to 30 mL each. The resulting polyol was a clear, pale-yellow liquid with a density of 0.9363 g/cm³, a viscosity of 14.03 cSt, a pH of 5.22, an acid value of 174.8 mg KOH/g and a hydroxyl value of 180.7 mg KOH/g. Increasing TDI volume decreased foam density due to exothermic CO? generation but increased compressive strength through higher crosslink density, whereas increasing PEG-400 linearly increased density but lowered compressive strength at high TDI levels, as PEG-400 acts as a soft-segment former. The optimum formulation, satisfying ASTM F1839 Grade 5, was Polyol : TDI : PEG-400 = 10 : 30 : 15 mL, giving a density of 0.0743 g/cm³ and a compressive strength of 0.7089 MPa. SEM showed a predominantly closed-cell structure, and FTIR confirmed urethane-bond formation (N–H, C=O, C–O). These results show that palm-oil-derived oleic acid is a feasible renewable feedstock for bio-based rigid polyurethane foam, supporting SDG 9 (Industry, Innovation and Infrastructure), SDG 12 (Responsible Consumption and Production) and SDG 13 (Climate Action). Contribution to Sustainable Development Goals (SDGs):SDG 9  : Industry, Innovation, and InfrastructureSDG 12: Responsible Consumption and ProductionSDG 13: Climate Action

Copyrights © 2026






Journal Info

Abbrev

ajarcde

Publisher

Subject

Agriculture, Biological Sciences & Forestry Earth & Planetary Sciences Education Energy Environmental Science

Description

AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment) publishes papers on innovative applications, development of new technologies, and efficient solutions in agriculture, engineering, computing, economic, social, information technology, food, energy, and scientific ...