Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 11 Documents

1 2

Search results for , issue "Vol 8, No 2 (2007): Agustus" : 11 Documents clear

Analisis Kebutuhan Stake Holder Purwatiningsih, Dyah Retno; Handayani, Dwi Iryaning; Kessy, Annisa; Masudin, Ilyas
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The development of an industry in 2008 is very different with 13 years ago so that, need the reobservation on the curriculum. The graduate of Industrial Engineering of University of Muhammadiyah Malang can compete with the raduate from other university and can get the job. That is why the Industrial Engineering need to know the criteria and the necessity that the stake holder want in the development of industry, and the result of it can be use as the reference in the development of the curriculum in industrial technical. So that the graduate of industrial technical is realy appropirate with the stake holder want and ready to compete with other graduate from other private university. The aim of this research is to get the curriculum attributetha appropriate with the necessity of todays stake holder. Analytical hierarchy process (AHP) is use as the theory in this research. The criteria that the stake holder want in the service sector or manufacture sector are proffesion skill, managerial, interesting appearance, communication skill, computer ability, meanwhile the criteria for the private enterprise are discipline, modal, skill, creative, team work.

PENINGKATAN DAN PENYERAGAMAN KUALITAS BATU KAPUR OLAHAN DENGAN APLIKASI RANCANGAN KOKOH TAGUCHI Leksono, Eko Budi
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The problem of quality is often found in limestone combustion of small and medium central industry in Manyar Regency, Gresik, in which, the quality of limestone is defected and has high variation of CaO. One of many methods to improve it is by applying Robust Design from Taguchi, them, its result is socialized in a central industry as a reference for those who conduct combustion in producing material. This study found four controlled factors that each of them consists of two levels that can influence the quality of limestone: A) raw material (level 1 = yellow limestone; level 2 = white limestone); B) Combustion material (level 1 = wood & rubber; level 2 = wood and gerbage sawmill); C) Combustion length of time (level 1= five days; level 2 = four days); D) Combustion temperature (level 1 = ± 800° C; Level 2: ± 875° C). Meanwhile, the optimal combination factor level to improve the quality of limestone is A2, C1, D1, and B2. If factor of combination level is applied, the number of defected good in each combustion can be predicted as much as 1,41% and the defected variable among combustion is 0.37%.

Evaluasi Supplier dengan Menggunakan Metode Maxâ€“Min Kusuma, Yanti
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Every company have more than one supplier for the supply of required material. This matter function to improve strength drive a bargain had by company as well as to take care of the availibility of product. Various problem related to supplier always emerge. For example, inappropriate quality of specification and delay of delivery. This situation push importantly of him evaluate supplier periodically for the agenda of getting supplier the bestness. This matter also happened in PT SAI Apparel Industries which producing ready made clothes. Intention of this research was to Choose type of supplier with biggest problem for the PT SAI Apparel Industries and measure performansi of suppliers. There are some methods evaluate supplier able to be used for the election of supplier. But the method seldom involving or joining performance variability at making decision processes. This is matter which necessary for buyer to estimate and put into some type of is calculation to more accurate in evaluating performance of supplier and improve effectiveness at making decision processes. This matter can reach by using approach of Max - Min, which can calculate value of efficiency maximum and minimum of supplier at process evaluate supplier. Later; Then result of this tested by statistic non parametric in identifying homogeneous group of supplier. By using 5 attribute selected by PT SAI Apparel Industries in the evaluation of him, got result of that PT Kahatex is best supplier (performer good), is later; then followed by Persh. YKK JKT, PT.Lucky Print Abadi, and Persh. Bintang Surya.

Penentuan Jumlah dan Kombinasi Jenis Kendaraan dengan Saving Heuristik pada Perusahaan Jasa Logistik Pihak Ketiga Rusdiansyah, Ahmad; Aryusamalia, A
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

PT XYZ is company of logistics service of PT CI where this company hold responsible to logistics activity of PT CI that is covering distribution and warehousing. In transportation activity PT XYZ conducted armada outsourcing transport from some transporter every day. A problem faced in this time was truck rent expenses for the delivery of order to store. Hypothesis customer early from this research was if it done consolidation delivery of order customer, hence expected will be yielded to decrease cost rent daily truck which enough significant. At this research, consolidation conducted by developing method of saving heuristic. By using data of customer was same order on February, 10 2006, this research can reduce consumer of truck counted 3 truck and yield cost-saving rent equal to 18.87% from expense of early. This research also design software prototype for daily operational activities in determining used truck.

Lean Production: A Way To Reduce The Internal Inventory And Cycle Time Mas'udin, Ilyas
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The progressive competition among industries and the increase of customer expectation will lead the progressive efforts in reducing the cost of production and logistic activities in the future. The companies (mass production, job shop and service industries) are forced to tighten their production process effectively by cutting the unnecessary activities in logistic flow, delete dummy and redundant elements, specializing the core business, and eliminate the wastes to simple and make their production process is more competitive. The lean concept could be the alternative way to reduce the main wastes: inventories and production cycle time. Eventhough it is very expensive to implement the lean production in the shop floor production, but the waste elimination and continuous improvement as the main key of the lean thinking has promised a significant improvement and profit for companies which implement the concept. The tools that could be used as methods to make the production process leaner such as just in time with kanban card system, kitting principle, collaborative scheduling and production plan, group technology, cell manufacture design and line balancing are well implemented in the worldwide. The efforts in leaning production will continue due to the lean thinking basically try to make the system better and believe that there is no best system but there is always better system.Â

Aplikasi Konsep Understand, State, Evaluate, Plan, Do, Study, Action Handayani, Dwi Iryaning
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Tiang pancang is the main product of PT Hume Sakti Indonesia. There were the error product of it,the company must be found the solution which can be used to increase quality of this product itself. The writer wanted to plain the improvement of product quality with using USE-PDS concept (Understand, State, Evaluate, Plan, Do, Study, Act) and FMEA analysis. After the writer have done this concept and FMEA got the result where the first DPMO for this company was 10853 per billion of chance with total of failure was 5.680.000 rupiahs. Than chose alternative which the writer can be recommended based on the FMEA table, where recommendation to choose this alternative based on the highest value. Based on FMEA table was gotten the highest priority was from the last production.

Penilaian Kualitas Daya Sistem Kelistrikan PT. Sai-Pasuruan Ronilaya, Ferdian
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The reliability services and power quality of power system nowadays become popular in industry because of cost energy reason, not exception for PT SAI. This company utilize control unit process to produce aluminum foil. The purpose of this research is identifying and analyzing the power quality of PT SAI and then to find the correct and economical solution to extinguish the source of bad power quality. After we identified, we conclude that 65% of load are AC motors, 25% of DC motors, 8% of heater and 2% of lightning. For over voltage and under voltage, refers to IEEE 519 â€“ 1995 standard, PT SAI have 99% of nominal voltage. But for voltage imbalanced, refers to NEMA MG-1-1993 standard, PT SAI have 1,22%. For THD of voltage, PT SAI have 1,98%. But for THD of current, PT SAI have 34,47%. While transformer loading between 0,47% - 29,7%.

Penerapan Quality Function Deployment Untuk Pengembangan Produk Perajang Bawang Sakti, Arya Mahendra
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research was expected to apply QFD in the development process of product which refers to consumer request, so that the result of scheme process really answers market requirement. The research methods were conducting product survey in field, making questionaire of consumer request, spreading questioner, checking returned questioner data, and the processing questioner data by QFD. The matrix of concept assessment shows that concept A (funnel one semi automatic) gets value 0.238 and 16510%; concept B (funnel two semi automatic) gets value 0.211 and 16630%; concept C (funnel two semi automatic/manual) gets value 0.203 and 18470%; so that amongst the third concept, the one which is appropriate to be proceeded to the production department is only concept A.

Pengaruh Waktu Treatment Serat terhadap Sifat Mekanik Komposit Serat Tapis Kelapa Suardana, Ngakan Putu Gede; Dwidiani, Ni Made
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Coconut tapis fiber is one of the natural fiber for use composites on account of its characteristic such as a high strength to weight ratio, resistance to corrosion, resistance to wear, good finishing surface, no health risk and easy availability. This research was conducted to study tensile strength and flexural strength of coconut tapis fiber reinforced composite with variable of fiber treatment in NaOH for 2, 4, and 6 hours. This research used coconut tapis fiber with 0.04 -1 mm diameter and 10 mm length, resin unsaturated polyester type Yukalac 157 BQTN-EX as its matrix, and metil etil keton peroxide 1% as its hardener. The fiber was treted in NaOH for 2, 4, and 6 hours, afterward rinsed and dried, respectively. The composite was made using press hand lay-up technique with post curing 2 hours at temperature of 620C. Tensile and flexure test specimen were made based on ASTM D3039 and ASTM D 790-03 standard accordingly. The result shows that tensile strength decrease with increasing treatment in NaOH. The highest tensile strength was achieved by 2 hours treatment in NaOH at 58.8 MPa. The highest tensile strain was achieved by 2 hours treatment NaOH at 1.30%. The highest tensile modulus of elasticity was achieved by 6 hours treatment in NaOH at 5.07 GPa. In agreement with tensile strength, flexural strength also decreased with increasing treatment in NaOH. The highest flexural strength was achieved by 2 hours treatment in NaOH at 125.98 MPa, and the highest flexural strain was achieved by 2 hours treatment in NaOH at 1.35%. The highest flexural modulus of elasticity was achieved by 6 hours treatment in NaOH at 13.55GPa.

Lightweight Approach Of Xml Implementation As Industrial Standard For Information Sharing Widodo, Erwin
Jurnal Teknik Industri Vol 8, No 2 (2007): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Information sharing in supply chain has emerged as one critical factor in maintaining company's responssiveness. This ability is needed to overcome both the supplier and customer requirements in sharing their data to accomplish their operational routines. A lot of efforts have been devoted in such research area including XML (eXtensible Markup Language) technology. However, a stepwise approach on how to utilize this advance technology is still lacking. This paper proposed a lightweight approach to implement XML in information sharing firmly. The main XML characteristics will be exploited so that the advantages of utilizing this mark up language may be highlighted. Based on these important remarks a lightweight approach of implementing XML is possible to be composed. The expected outcome is a step-by-step guidance for data exchanger to utilize XML simply but precisely and accurately. A case study of information sharing in commerce is elaborated to enhance our understanding on how to implement this approach in real domain problem.

Page 1 of 2 | Total Record : 11

1 2

Filter by Year

2007 2007

Filter By Issues

All Issue Vol. 25 No. 2 (2024): August Vol. 25 No. 1 (2024): February Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol 20, No 2 (2019): August Vol. 20 No. 2 (2019): August Vol 20, No 1 (2019): February Vol. 20 No. 1 (2019): February Vol 19, No 2 (2018): Agustus Vol. 19 No. 2 (2018): Agustus Vol. 19 No. 1 (2018): Februari Vol 19, No 1 (2018): Februari Vol 18, No 2 (2017): Agustus Vol. 18 No. 2 (2017): Agustus Vol 18, No 1 (2017): Februari Vol. 18 No. 1 (2017): Februari Vol. 17 No. 2 (2016): Agustus Vol 17, No 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol. 16 No. 2 (2015): Agustus Vol 16, No 2 (2015): Agustus Vol 16, No 1 (2015): Februari Vol. 16 No. 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol. 15 No. 1 (2014): Februari Vol 15, No 1 (2014): Februari Vol 14, No 2 (2013): Agustus Vol. 14 No. 2 (2013): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 2 (2012): Agustus Vol. 13 No. 1 (2012): Februari Vol 13, No 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol 12, No 1 (2011): Februari Vol. 12 No. 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol. 11 No. 1 (2010): Februari Vol 11, No 1 (2010): Februari Vol. 10 No. 2 (2009): Agustus Vol 10, No 2 (2009): Agustus Vol 10, No 1 (2009): Februari Vol. 10 No. 1 (2009): Februari Vol 9, No 2 (2008): Agustus Vol. 9 No. 2 (2008): Agustus Vol. 9 No. 1 (2008): Februari Vol 9, No 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol 8, No 1 (2007): Februari Vol. 8 No. 1 (2007): Februari Vol. 4 No. 2 (2003) Vol 4, No 2 (2003) Vol. 3 No. 2 (2002) Vol 3, No 2 (2002) Vol 3, No 1 (2002) Vol. 3 No. 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol. 2 No. 1 (2001) Vol 2, No 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol 1, No 1 (2000) Vol. 1 No. 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA