Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 14 Documents

1 2

Search results for , issue "Vol. 13 No. 1 (2012): Februari" : 14 Documents clear

Algoritma Differential Evolution Untuk Penjadwalan Flow Shop Banyak Mesin Dengan Multi Obyektif Stefanus Eko Wiratno; Nurdiansyah Rudi; Budi Santosa
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research focuses on the development of Differential Evolution(DE) algorithmto solve m-machine flow shopscheduling problems with respect to both makespan and total flow time. Development of DE algorithm is done by modifyingthe adaptive parameter determination procedure in order to change the value of adaptive parameters in each generation,adding local search strategy to the algorithm in order to improve the quality of the resulting solutions, as ewell as modifyingthe crossover in order to reduce computation time. The result indicates that the proposed DE algorithm has proven to bebetter than the original DE algorithm, Genetic Algorithm (GA), and for certain cases it also out performs Multi-ObjectiveAnt Colony System Algorithm (MOCSA).

Penerapan Revenue Sharing Contract Pada Klaster Industri Nurwidiana Nurwidiana
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Industry cluster are geographic concentrations of competing, complementary, or interdependent firm and industries that do business with each other and/or have common needs for talent, technology, and infrastructure. In a industry cluster, the relationship should be profitable for each other. However, in the absence of contract, Small Medium Enterprises (SMEs) as producers, do not have a strong bargaining position compared to a distributor as supporting industry so that SMEs are frequently lost. This research focus on the revenue sharing contract as an effort of coordination in snacks industry cluster. In the revenue sharing contract the manufacturer charges the distributor a low price and shares a fraction f of revenue generates by distributor. Based on the analysis has been performed, implementing revenue sharing model, can reduce the overstock cost so that it can increase the quantity orders from distributors and finally increase profits for both the SMEs and distributor. In order to gain optimum profit, it is needed to set the fraction (f) of profit sharing on revenue sharing contract. The implementation of this model requires information sharing between the SMEs and distributor.

Strategi Pengembangan Usaha Kecil Menengah Sektor Industri Pengolahan Arief Rahmana
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The paradigm underlying this research is that SME has contribution to economic growth, that is indicated by their contribution to employment and Gross Domestic Product. SMEs contribute to employment more than 99,7 per cent of national employment and contribute to more IDR 1,013.5 trillion or 56,73 per cent. Nevertheless, the developing of SME's facing some problems namely lack of capital, difficulties in marketing, simple organizational structure with unstandard job description, low of quality management, limited human resource, generally it has no finanacial accounting, low of legality aspect, and low of technology quality. According to this matter, a comprehensive strategy for developing SME's is very crusial to develop in order to fasten SME's growth, to eliminate SME's problems, and to make SME's competitive. The strategy composed based on integration of location quotient, diamond cluster model, and SWOT analysis approach. The result indicated that SME's which have big potential to develop are manufacturing industry sector, because it has the biggest value of LQ is about 4,277. Then, strategy for developing SME's is ST strategy, namely using some strength to overcome some threats. According to this strategy, SME's should carry out product diversification by using CNC, CAD, and CAM technology, improve quality of product, and cooperate with suppliers to get supply raw material.

Faktor -Faktor yang memengaruhi Peningkatan Daya Saing Klaster Mebel di Kabupaten Jepara Naniek Utami Handayani; Haryo Santoso; Adithya Ichwal Pratama
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Indonesia is known as one of the nation's largest mebel exporter in the world. But, the development of Central Java mebel exports for four years fluctuated but tended to decline that was caused by economic crisis of the world. Industrial clusters are one of the strategic that was used to develop industry based on region. The purpose of this study was to analyze the factors affecting the competitiveness of the mebel industry in order to take policies that can be used to improve the competitiveness of Indonesian mebel industry of Central Java especially in overseas markets. This study use PLS (Partial Least Square) as tools that serve to test the diamond model porter plus social capital variables and analyze the factors that affect competitiveness, caused total population size used in this study is small. The results showed that competitiveness in the Mulyoharjo furniture cluster is influenced by condition factors, demand condition, related supporting industries. Whereas, Senenan furniture cluster is influenced by condition factors, the role of government, the opportunities, and social capital.

Pengembangan Industri Non-Corporate Partisipatif Integratif Pada Industri Minyak Atsiri Kenanga Vina Salviana DS
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research is considered as 'action research' which was tried to analyze the problems of aetheric oil industry made of Cananga flower. Research was held in Blitar Regency, East Java, as one of center aetheric oil production in Indonesia,which has potential to increase its production up to international scale. Based on this perspective, it was important to build such community empowerment based on integrative-participative model through business industry groups with basic characteristic non-corporate as suitable alternative for the development of Cananga farmer community. The results of this research were enhance distilation process, dealing with the waste from the distilation process, expanding the business unit of aroma therapy as the main product and also improving business mentality through some training activity for business motivation building.

Penentuan Dan Pengembangan Kompetensi Inti Kabupaten Bekasi Rahmat Nurcahyo; Farizal Farizal; Edwin Stiadi; Saparudin Saparudin
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Development of a region is a vital issue for the survival of the area. One way for development of a region is based on core competence. This research discusses the core competence of Bekasi region for development. This research methodsare Analytic Hierarchy Process and Interpretive Structural Modeling. Results from this research is a road map model for Bekasi region development, based on small and medium enterprises in food and beverage industry.

Minimasi Defect Produk Dengan Konsep Six Sigma Shanty Kusuma Dewi
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Company can be competitive in industry with giving a product which pursuit with the specification and have no defect, in order to produce product which have good and uniform quality existed variance had to be minimized. Six Sigma was a total approach to solve problems and increase process through DMAIC phase (Define, Measure, Analyze, Improve, Control). Measure phase with Pareto diagram of defect cone polyester 30, it was found that percentage of cone defect polyester 30 were: lapping, swelled, stitch, pattern, wrinkles, and ribbon and in the measure phase, it was known that sigma value equal to 3,05. Analyze phase used cause and effect diagram to analyze causes of a problem in detail. Improve phase used potential failure mode effect and analysis (PFMEA). In control phase statistical process control (SPC) was used, attribut data np control chart. The result of research were reducing DPMO to 29,87% and increasing value of sigma to 3.8 after the application of Six Sigma.

Model Penunjang Keputusan Jadwal Produksi Jus Buah Segar Iffan Maflahah; Machfud Machfud; Faqih Udin
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Planning and production control are important factors to determine the efficiency derived through proper management of raw material supply of fresh fruits, production planning and master production schedule. This research aimed to develop the aggregate production planning model, and master production schedule model for juice production from fresh fruit, while also considered the perishability of the fresh fruit. There were several methods applied in the works, namely autoregressive integrated moving average (ARIMA) for forecasting of raw material product sale, mathematical model for raw material supply, linear programming for production planning and prospective production scheduling to develop master production schedule. This research developed software for decision support system called RP_JUS. The results showed that all raw material damage was distributed exponentially. Decision Support Model of Production Schedule for Fresh Fruit Juice can be applied to the processing indudtries that use fresh fruit.

Analisa Kelayakan Investasi Perbaikan Sarana Produksi Pada Home Industri Kerupuk Bawang Herdiana Dyah Susanti
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Onion Cracker has a unique onion is half maturation of the chewy dough and cut into thin hard, the pieces can be good just by using the slicer. The perpetrators of many home industry who complain that their profits can not be produced due to constraints on the maximum cutting process that is still traditional. It is therefore necessary process improvements to increase production capacity, as well as conducting a feasibility study. Based on market aspects, the replacement methods on a conventional blade cutting process of using a new cutting machine at UD. Kalirejo considered feasible because of the data currently available demand tends to increase significantly. Also from the technical aspects are considered feasible because of the output produced by using a new cutting machine is greater than the output using a conventional knife. Output of conventional blades = 60 Kg per day and a new cutting machine crackers = 100 Kg per day. As well as from the financial aspect considered feasible because of the newly acquired piece of machinery NPV Rp. 514 604 751, IRR of 65.88%, and DPP 2 years 11 months. Improvement in the cutting process feasible because the amount of income earned is greater than the cost of the investment program ROI 1,44.

Pengembangan Rancang Bangun Game Edukasi Logistik "Stowagame" Mengenai Penataan Kontainer Di Bay Kapal Hendriyono Rachman; Ahmad Rusdiansyah
Jurnal Teknik Industri Vol. 13 No. 1 (2012): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Development of educational games focuss on the problem occured on bay management, primarily on loading container at ship bay. The loading plan problem in ship bay commonly known as Master Bay Plan Problem (MBPP). The complexity of MBPP can be seen on its constraints, that are container weight, container destination, container size, container type, and the arrangement rule of container. The study case and playing rules in this game development are adjusted to contextual theory and real situation occured in container arrangement at ship bay. The prototype of this game is called StowaGame. StowaGame is a simulation-based educational games related to container arrangement in ship bay. This software are built with the integration of MBPP and entertainment concept. The effectivity of this educational game will be tested by several player. The MBPP concept of each player will be tested before and after playing the game. Paired-t test calculation shows that p-value is less than 0,05. Thus, it can be concluded that the educational game can educate people with container arrangement concept in ship bay.

Page 1 of 2 | Total Record : 14

1 2

Filter by Year

2012 2012

Filter By Issues

All Issue Vol. 25 No. 2 (2024): August Vol. 25 No. 1 (2024): February Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol 20, No 2 (2019): August Vol. 20 No. 2 (2019): August Vol. 20 No. 1 (2019): February Vol 20, No 1 (2019): February Vol. 19 No. 2 (2018): Agustus Vol 19, No 2 (2018): Agustus Vol. 19 No. 1 (2018): Februari Vol 19, No 1 (2018): Februari Vol 18, No 2 (2017): Agustus Vol. 18 No. 2 (2017): Agustus Vol. 18 No. 1 (2017): Februari Vol 18, No 1 (2017): Februari Vol. 17 No. 2 (2016): Agustus Vol 17, No 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol 16, No 2 (2015): Agustus Vol. 16 No. 2 (2015): Agustus Vol. 16 No. 1 (2015): Februari Vol 16, No 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol 15, No 1 (2014): Februari Vol. 15 No. 1 (2014): Februari Vol. 14 No. 2 (2013): Agustus Vol 14, No 2 (2013): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 2 (2012): Agustus Vol 13, No 1 (2012): Februari Vol. 13 No. 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol. 12 No. 1 (2011): Februari Vol 12, No 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol 11, No 1 (2010): Februari Vol. 11 No. 1 (2010): Februari Vol 10, No 2 (2009): Agustus Vol. 10 No. 2 (2009): Agustus Vol 10, No 1 (2009): Februari Vol. 10 No. 1 (2009): Februari Vol. 9 No. 2 (2008): Agustus Vol 9, No 2 (2008): Agustus Vol 9, No 1 (2008): Februari Vol. 9 No. 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol. 8 No. 1 (2007): Februari Vol 8, No 1 (2007): Februari Vol 4, No 2 (2003) Vol. 4 No. 2 (2003) Vol 3, No 2 (2002) Vol. 3 No. 2 (2002) Vol 3, No 1 (2002) Vol. 3 No. 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol 2, No 1 (2001) Vol. 2 No. 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol 1, No 1 (2000) Vol. 1 No. 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA