Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Journal of Engineering and Technological Sciences

JETS
Website

Published by Institut Teknologi Bandung

ISSN : 23375779 EISSN : 23385502 DOI : -

Core Subject : Engineering,

Engineering

Journal of Engineering and Technological Sciences welcomes full research articles in the area of Engineering Sciences from the following subject areas: Aerospace Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Electrical Engineering, Engineering Physics, Environmental Engineering, Industrial Engineering, Information Engineering, Mechanical Engineering, Material Science and Engineering, Manufacturing Processes, Microelectronics, Mining Engineering, Petroleum Engineering, and other application of physical, biological, chemical and mathematical sciences in engineering. Authors are invited to submit articles that have not been published previously and are not under consideration elsewhere. Starting from Vol. 35, No. 1, 2003, full articles published are available online at http://journal.itb.ac.id, and indexed by Scopus, Index Copernicus, Google Scholar, DOAJ, GetCITED, NewJour, Open J-Gate, The Elektronische Zeitschriftenbibliothek EZB by University Library of Regensburg, EBSCO Open Science Directory, Ei Compendex, Chemical Abstract Service (CAS) and Zurich Open Repository and Archive Journal Database. Publication History Formerly known as: ITB Journal of Engineering Science (2007 â€“ 2012) Proceedings ITB on Engineering Science (2003 - 2007) Proceedings ITB (1961 - 2002)

Arjuna Subject : -

Articles 10 Documents

Search results for , issue "Vol 49, No 3 (2017)" : 10 Documents clear

Cover Vol. 49 No. 3, 2017 Technological Sciences, Journal of Engineering and
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1438.702 KB)

Three-Dimensional Gravity Inverse Modeling for Basement Depth Estimation Integrating Maximum Difference Reduction (MDR), Trend Surface Analysis (TSA) and Total Variation Regularization Handyarso, Accep; Grandis, Hendra
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

In sedimentary basin studies, gravity data are typically used to estimate the basement topography. Gravity inversion methods are expected to be able to discriminate between continuous and discontinuous sedimentary basins. Most 3D gravity inversion methods require intensive computational resources (computer memory and processing time). MDR3D, a variant of the well-known Bott method, was transformed into the Gauss-Newton inversion approach for extension flexibility. Integration of trend surface analysis (TSA) into the inversion scheme for regional anomaly estimation allows basement depth estimation from the Bouguer anomaly data. The aim of the additional total variation regulariÂzation is to stabilize the inversion algorithm and to achieve a geologically feasible model, especially for discontinuous basin types. Evaluation of the proposed method led to satisfactory results both for the synthetic and the field data set. It was found that the regularization parameter can improve the stability of the algorithm and also the depth estimation from noisy data up to Â±0.5 mGal.

Static Gesture Recognition Algorithm Based on Upper Triangular Image Texture and Recursive Graph Yang, Cai
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

A static gesture recognition algorithm is proposed based on a recursive graph of the upper triangular image texture, motivated by the low accuracy and robustness of existing algorithms. Firstly, the fingertip localization method based on contour curvature is used to obtain the palm region and then the gesture contour model is established. Secondly, a recurrence plot of the gesture contour sequence is built, which is constructed using the central point and the starting point coordinates. Finally, the texture recognition algorithm is applied to calculate the normalized distance between the recurrence plots of the gesture. The experimental results show that the proposed algorithm can achieve higher recognition accuracy under varying complex backgrounds and illumination. At the same time, when the gesture is in rotation, translation, or scaling, the algorithm has high robustness with a small amount of computation and high efficiency.

Determination of the Optimum Hydraulic Retention Time in Two-Stage Anaerobic Fluidized Bed Bioreactor for Landfill Leachate Treatment Prasetyo, Eli; Sudibyo, Hanifrahmawan; Budhijanto, Wiratni
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

Leachate in Indonesian landfill sites poses a high risk to the surrounding environment should there be leakage in the accumulating ponds. Anaerobic digestion is an attractive option to clean up leachate, mostly due to the affordability of its operational cost. To enhance the efficiency of leachate digestion, anaerobic microbes were immobilized on the surface of natural zeolite powder. The powder was fluidized in a mesophilic anaerobic fluidized bed reactor (AFBR) for more stable biofilm formation. The AFBR scheme was split into two stages, with the first stage dominated by the acidogenic process and the second stage dominated by the methanogenic process. The dominating microbes in each stage were provoked by pH control to maintain the first stage acidic at pH 5-5.5 and the second stage neutral at pH 7-7.5. The first stage was run at five different hydraulic retention times (HRTs), while the second stage was run at three different HRTs to determine the optimum HRT for each stage. For acidogenic AFBR with HRTs of 5 days and 2.5 days, the VFA concentration profile increased for a longer period compared to the other HRTs. The COD removal efficiency at steady state was almost identical for all HRTs. For methanogenic AFBR, all three HRTs showed an identical rate of biogas formation at steady state.

Study of Hall Effect Sensor and Variety of Temperature Related Sensitivity Ali, Awadia Ahmed; Yanling, Guo
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

Hall effect sensors are used in many applications because they are based on an ideal magnetic field sensing technology. The most important factor that determines their sensitivity is the material of which the sensor is made. Properties of the material such as carrier concentration, carrier mobility and energy band gap all vary with temperature. Thus, sensitivity is also influenced by temperature. In this study, current-related sensitivity and voltage-related sensitivity were calculated in the intrinsic region of temperature for two commonly used materials, i.e. Si and GaAs. The results showed that at the same temperature, GaAs can achieve higher sensitivity than Si and it has a larger band gap as well. Therefore, GaAs is more suitable to be used in applications that are exposed to different temperatures.

Application of Fin System on Adsorption of Methylene Blue Dye using Adsorbent Coating Layer: Mathematical Formulae Abd Hamid, Shazlina; Ismail, Suzylawati
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

Treatment of dye solution using fin system is one of the new adsorption application techniques that can replace expensive conventional adsorption treatment units that mostly used in industries. The fins will work as the media of adsorbent coating and immerse in a tank containing dye wastewater. The purpose of present study is to develop simple mathematical equations for the finâs system by using adsorbent coating layer (ACL) as an adsorbent. By installing coated fins inside the tank, the concentration of dye can be easily reduced up to 90 %. The equilibrium adsorption data was best met by the Langmuir isotherm, indicating the adsorption is homogeneous surface and in monolayer state.Â The mathematical formula developed from the isotherm model of adsorption was revealed to be used in large scale application for the removal of methylene blue dye from industrial wastewater since the percent error between calculated and experimental values were less than 15%.

Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia Sapiie, Benyamin; Rifiyanto, Arif
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

Cleats are natural fractures within coal seams. This paper presents the results of regional cleat mapping and characterization in relation to coalbed methane (CBM) exploration and development in the Barito Basin, South Kalimantan, Indonesia involving two major coal layers, namely the Late Eocene Tanjung Formation and Early to Middle Miocene Warukin Formation with thicknesses ranging from 2 to 50 m. The coal is classified as lignite to subbituminous with calorific values ranging from 6000-8000 Cal/gr with ash content 0.68-17.42%. We applied two methods of cleat measurement, i.e. scanline and window sampling using a 100 x 100 cm grid. More than 20,000 cleats were measured from 65 scanline and 37 window sampling locations. The results revealed that face and butt cleats are predominantly oriented in the WNW-ESE and NNE-SSW directions, respectively. The results showed that cleat density increases related to structural position such as fold hinge and fault zone. The formation of the cleats may be influenced by several geological processes, where the cleats, which form during coalification, are superimposed by later processes such as fluid pressure and tectonic stresses and are seemingly also affected by the composition of the coal.

Anatomy of Injury Severity and Fatality in Indonesian Traffic Accidents Santosa, Sigit Puji; Mahyuddin, Andi Isra; Sunoto, Febrianto Guntur
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

There has been a steady increase in traffic accidents with major injuries in Indonesia over the last 10 years, especially those with a score higher than 3 on the Abbreviated Injury Scale (AIS). Frontal, side, and rear collisions, as well as pedestrian impact are modes of accident that contribute to the majority of injuries or fatalities. Based on age classification, the 16-30 age group are the most vulnerable road users in Indonesia. Traffic accidents in Indonesia are dominated by motorcycles, which also contribute the highest portion of fatalities and major injuries (AIS score > 3). Most traffic accidents can be attributed to human, road and environmental, or vehicle factors. Careless driving and unruly behavior of the driver are the main causes of accidents in Indonesia. Statistical data and analyses on traffic accidents in Indonesia can be used to develop a comprehensive strategy and policy to reduce the number of fatalities and severe injuries of road accidents in Indonesia. There is a need to balance the high growth of motor vehicles with adequate infrastructure. Good driver education as well as vehicle safety and crashworthiness regulations are required in order to reduce traffic accident fatalities.

Synthesis of TiO2 Nanofiber-Nanoparticle Composite Catalyst and Its Photocatalytic Decolorization Performance of Reactive Black 5 Dye from Aqueous Solution Notodarmojo, Suprihanto; Sugiyana, Doni; Handajani, Marisa; Kardena, Edwan; Larasati, Amanda
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

In this study, synthesis of TiO2 nanofiber-nanoparticle composite photocatalyst was carried out and its photocatalytic decolorization performance was investigated. TiO2 nanofibers were developed by electrospinning. The TiO2 nanoparticle films were prepared by dipping the glass substrates into a sol solution made by sol-gel method. The TiO2 nanofiber-nanoparticle composite was immobilized on glass plates and annealed at 500 Â°C. The effects of pH and catalyst loading were studied during a photocatalytic decolorization experiment using simulated dyeing wastewater containing Reactive Black 5 (RB5). The photocatalytic decolorization performance with 60 min of UV-irradiation time using the TiO2 nanofiber-nanoparticle composite was found to be higher (94.4%) than that of the TiO2 nanofibers (75.5%) and the TiO2 nanoparticle catalyst (74.1%). An alkaline condition and high catalyst loading were found to be preferable to achieve optimum photocatalytic decolorization of Reactive Black 5 (RB5). The TiO2 nanofiber-nanoparticle composite could be recovered after reusing multiple times through re-annealing at a high temperature. TiO2 nanofibers based on a composite catalyst that is strongly immobilized on glass plates enlarges the prospect of the photocatalytic method as a compact, practical and effective advanced treatment process for effluents from textile wastewater.

Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery Soler, Yakov Iosifovich; Nguyen, Van Canh
Journal of Engineering and Technological Sciences Vol 49, No 3 (2017)
Publisher : ITB Journal Publisher, LPPM ITB

In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indicates the dominant role of abrasive tool force impact on the ground surface. A decrease, in contrast, evidences a significant softening under the influence of heat source. This research based on nonparametric statistics to predict the effect of wheel characteristics with abrasives 25A, 92A/25A, 34A, 5A, EKE, 5NQ, TGX, 5SG and with graininess 46 (F46), 60 (F60), 80 with different porosities (structure numbers 6-12), and the expected measures of position and dispersion on the micro-hardness of the surface of a high-speed cutting plate (HSCP) made of W9Mo4Co8 steel. It was found that grinding this HSCP by wheels 5NQ46I6VS3, 5SG46K12VXP, 5SG60K12VXP, 5SG46I12VXP, 25AF46M12V5?PO, 25AF46M12V5?PO3, 25?F46M10V5?PO, 25AF46M10V5?PO3, 25AF46K10V5?PO3, 25AF60M10V5?PO3, 25AF46L10V5?KF35, EKE46K3V, 92A/25AF46L6V20 occurred without surface softening for 50% of the details from the operating batch.

Page 1 of 1 | Total Record : 10

Filter by Year

2017 2017

Filter By Issues

All Issue Vol. 55 No. 6 (2023) Vol. 55 No. 5 (2023) Vol. 55 No. 4 (2023) Vol. 55 No. 3 (2023) Vol. 55 No. 2 (2023) Vol. 55 No. 1 (2023) Vol. 54 No. 6 (2022) Vol. 54 No. 5 (2022) Vol. 54 No. 4 (2022) Vol. 54 No. 3 (2022) Vol. 54 No. 2 (2022) Vol. 54 No. 1 (2022) Vol. 53 No. 6 (2021) Vol. 53 No. 5 (2021) Vol. 53 No. 4 (2021) Vol. 53 No. 3 (2021) Vol. 53 No. 2 (2021) Vol. 53 No. 1 (2021) Vol. 52 No. 6 (2020) Vol. 52 No. 5 (2020) Vol. 52 No. 4 (2020) Vol. 52 No. 3 (2020) Vol 52, No 3 (2020) Vol. 52 No. 2 (2020) Vol 52, No 2 (2020) Vol 52, No 1 (2020) Vol. 52 No. 1 (2020) Vol 51, No 6 (2019) Vol. 51 No. 6 (2019) Vol. 51 No. 5 (2019) Vol 51, No 5 (2019) Vol. 51 No. 4 (2019) Vol 51, No 4 (2019) Vol 51, No 3 (2019) Vol. 51 No. 3 (2019) Vol. 51 No. 2 (2019) Vol 51, No 2 (2019) Vol 51, No 2 (2019) Vol. 51 No. 1 (2019) Vol 51, No 1 (2019) Vol 51, No 1 (2019) Vol 50, No 6 (2018) Vol 50, No 6 (2018) Vol. 50 No. 6 (2018) Vol 50, No 5 (2018) Vol 50, No 5 (2018) Vol. 50 No. 5 (2018) Vol 50, No 4 (2018) Vol. 50 No. 4 (2018) Vol 50, No 4 (2018) Vol 50, No 3 (2018) Vol 50, No 3 (2018) Vol. 50 No. 3 (2018) Vol. 50 No. 2 (2018) Vol 50, No 2 (2018) Vol 50, No 2 (2018) Vol. 50 No. 1 (2018) Vol 50, No 1 (2018) Vol 49, No 6 (2017) Vol. 49 No. 6 (2017) Vol 49, No 6 (2017) Vol 49, No 5 (2017) Vol 49, No 5 (2017) Vol. 49 No. 5 (2017) Vol 49, No 4 (2017) Vol. 49 No. 4 (2017) Vol 49, No 4 (2017) Vol. 49 No. 3 (2017) Vol 49, No 3 (2017) Vol 49, No 3 (2017) Vol. 49 No. 2 (2017) Vol 49, No 2 (2017) Vol 49, No 2 (2017) Vol 49, No 1 (2017) Vol. 49 No. 1 (2017) Vol. 48 No. 6 (2016) Vol 48, No 6 (2016) Vol 48, No 6 (2016) Vol 48, No 5 (2016) Vol 48, No 5 (2016) Vol. 48 No. 5 (2016) Vol. 48 No. 4 (2016) Vol 48, No 4 (2016) Vol 48, No 3 (2016) Vol. 48 No. 3 (2016) Vol. 48 No. 2 (2016) Vol 48, No 2 (2016) Vol. 48 No. 1 (2016) Vol 48, No 1 (2016) Vol. 47 No. 6 (2015) Vol 47, No 6 (2015) Vol. 47 No. 5 (2015) Vol 47, No 5 (2015) Vol. 47 No. 4 (2015) Vol 47, No 4 (2015) Vol 47, No 3 (2015) Vol. 47 No. 3 (2015) Vol 47, No 2 (2015) Vol. 47 No. 2 (2015) Vol. 47 No. 1 (2015) Vol 47, No 1 (2015) Vol. 46 No. 4 (2014) Vol 46, No 4 (2014) Vol. 46 No. 3 (2014) Vol 46, No 3 (2014) Vol. 46 No. 2 (2014) Vol 46, No 2 (2014) Vol 46, No 1 (2014) Vol. 46 No. 1 (2014) Vol. 45 No. 3 (2013) Vol 45, No 3 (2013) Vol. 45 No. 2 (2013) Vol 45, No 2 (2013) Vol 45, No 1 (2013) Vol. 45 No. 1 (2013) Vol. 44 No. 3 (2012) Vol 44, No 3 (2012) Vol. 44 No. 2 (2012) Vol 44, No 2 (2012) Vol. 44 No. 1 (2012) Vol 44, No 1 (2012) Vol 43, No 3 (2011) Vol. 43 No. 3 (2011) Vol. 43 No. 2 (2011) Vol 43, No 2 (2011) Vol 43, No 1 (2011) Vol. 43 No. 1 (2011) Vol 42, No 2 (2010) Vol. 42 No. 2 (2010) Vol. 42 No. 1 (2010) Vol 42, No 1 (2010) Vol. 41 No. 2 (2009) Vol 41, No 2 (2009) Vol. 41 No. 1 (2009) Vol 41, No 1 (2009) Vol. 40 No. 2 (2008) Vol 40, No 2 (2008) Vol. 40 No. 1 (2008) Vol 40, No 1 (2008) Vol 39, No 2 (2007) Vol. 39 No. 2 (2007) Vol. 39 No. 1 (2007) Vol 39, No 1 (2007) Vol 38, No 2 (2006) Vol. 38 No. 2 (2006) Vol. 38 No. 1 (2006) Vol 38, No 1 (2006) Vol 37, No 2 (2005) Vol. 37 No. 2 (2005) Vol 37, No 1 (2005) Vol. 37 No. 1 (2005) Vol 36, No 2 (2004) Vol. 36 No. 2 (2004) Vol. 36 No. 1 (2004) Vol 36, No 1 (2004) Vol 35, No 2 (2003) Vol. 35 No. 2 (2003) Vol. 35 No. 1 (2003) Vol 35, No 1 (2003) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota bandung,

Jawa barat

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota bandung, Jawa barat INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota bandung,

Jawa barat

INDONESIA