cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kab. ogan ilir,
Sumatera selatan
INDONESIA
Science and Technology Indonesia
Published by Universitas Sriwijaya
ISSN : 25804405     EISSN : 25804391     DOI : -
An international Peer-review journal in the field of science and technology published by The Indonesian Science and Technology Society. Science and Technology Indonesia is a member of Crossref with DOI prefix number: 10.26554/sti. Science and Technology Indonesia publishes quarterly (January, April, July, October). Science and Technology Indonesia is an international scholarly journal on the field of science and technology aimed to publish a high-quality scientific paper including original research papers, reviews, short communication, and technical notes. This journal welcomes the submission of articles that covers a typical subject of natural science and technology such as: > Chemistry > Biology > Physics > Marine Science > Pharmacy > Chemical Engineering > Environmental Science and Engineering > Computational Engineering > Biotechnology Journal Commencement: October 2016
Arjuna Subject : -
Articles 651 Documents
Sustainable Fabrication of Banana Pseudo-stem (Musa paradisiaca L.)-derived ZnO/Carbon Composite as a Photo-antibacterial Agent Diah Nur Syafitri; Fasih Bintang Ilhami; I Gusti Made Sanjaya
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1608-1618

Abstract

Bacterial infections and antimicrobial resistance (AMR) represent critical global health challenges, necessitating sustainable antibacterial alternatives. This study presents the hydrothermal synthesis of ZnO nanoparticles integrated with banana pseudo-stem-derived carbon (BPS-C) nanocomposite as a photo-antibacterial agent. Structural characterization confirmed crystalline hexagonal wurtzite ZnO formation (XRD), with ZnO nanoparticles distributed within the amorphous BPS-C matrix (broad halo 2θ ≈ 20–30°), verified by FTIR, SEM-EDS (C, O, and Zn peaks), and DLS analysis. These composites exhibited a significantly reduced hydrodynamic diameter (377 nm) compared to pure ZnO (826 nm) and BPS-C (19,602 nm), suggesting that the incorporation of BPS-C influenced the dispersion behavior of the composite particles. Furthermore, the incorporation of BPS-C influenced the optical properties and charge-carrier behavior of the composite material. More importantly, antibacterial activity was assessed using Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) as representative bacterial strains. The ZnO/BPS-C composite demonstrated antibacterial effects against the Gram-positive Staphylococcus aureus, whereas its impact on the Gram-negative Escherichia coli was lower compared to pure ZnO. The observed photo-antibacterial activity may be associated with reactive oxygen species (ROS) generation from the ZnO phase under light irradiation. The lower sensitivity of E. coli (maximum inhibition zone of 7.23 mm) may be associated with its protective lipopolysaccharide-rich outer membrane, while pristine BPS-C showed no antibacterial activity (6.00 mm). These findings demonstrate the feasibility of utilizing banana pseudo-stem as a sustainable biomass precursor for ZnO/carbon composite fabrication. Moreover, the ZnO/BPS-C nanocomposite emerges as a promising sustainable candidate for photo-antibacterial applications.
Rapid Prediction of Total Gingerol Content and Harvest Age Classification of Fresh Indonesian Red Ginger Using UV-Vis Spectroscopy Tika Hafzara Siregar; Fareihan Rizki Farikhin; Slamet Widodo; Y. Aris Purwanto; Lamhot Parulian Manalu; Tri Yulni; Nenie Yustiningsih; Harianto; Jonni Firdaus; Primawati Yenni Fauziah; Endang Suwandi; Marga Asta Jaya Mulia; Astuti; Tantry Eko Putri Mariastuty
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1406-1422

Abstract

Red ginger (Zingiber officinale var. rubrum) is a potential spice commodity widely used in the food and pharmaceutical industries due to its high gingerol content, which has antioxidant, anti-inflammatory, and anticancer properties. This study aims to develop a predictive model for gingerol content and a classification model for harvest age in Indonesian fresh red ginger using chemometrics and machine learning based on Ultraviolet-Visible (UV-Vis) spectroscopy. Samples from three harvest ages (7, 8, and 9 months after planting) were analyzed using a UV-Vis spectrometer. UV-Vis spectral data were acquired and processed using several spectral preprocessing techniques, namely baseline correction, Savitzky-Golay (SGs), Multiplicative Scatter Correction (MSC), and first derivative (D1). The analysis was performed using Partial Least Squares (PLS) and Artificial Neural Network (ANN) for prediction, as well as Principal Component Analysis (PCA), Linear Discriminant Analysis (LDA), k-NN, Random Forest, and Support Vector Machine (SVM) for harvest age classification. The ANN paired with SGs+D1 with 2 hidden nodes achieved the best predictive performance (R² = 0.66, r = 0.74), with RMSEC and RMSEP of 0.7062 and 0.8317, respectively. Meanwhile, the SVM model with a combination of Baseline+D1 preprocessing achieved a harvest age classification accuracy of 0.91 and precision, recall, and F1-score of 0.93 each. The findings of this research yield significant practical implications for both advanced post-harvest technology and the phytopharmaceutical industry. By delivering a highly precise classification model, this work lays a solid technical foundation required to design high-throughput, automated, and cost-effective sorting systems tailored for fresh Indonesian red ginger matrices.
The Power of Interpolation Effects on SARIMA and LSTM: An Indonesia Domestic Forecasting Case Study Muhammad Mahdy Yandra; Dwi Rantini; Arip Ramadan; Chris Matthew Widjaja; Adinda Syarifatul Muna; Alhassan Sesay
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1311-1322

Abstract

In regional economic planning, the accurate prediction of domestic tourism demand presents a critical challenge because limited access to historical time series data often causes advanced forecasting models to perform poorly. This study aims to demonstrate how linear interpolation can effectively serve as a data augmentation technique to overcome data scarcity when developing Long Short Term Memory (LSTM) networks to forecast domestic tourism arrivals. The methodology involves evaluating four distinct forecasting models using 80 months of Indonesian domestic tourism visitation data spanning from January 2019 to August 2025. These models include a statistical benchmark SARIMA (2,0,1)(0,1,1)[3] model selected via grid search out of 216 combinations and three LSTM variants run with identical random seeds. Performance evaluation is rigorously completed using MAE, RMSE, MAPE, sMAPE, and Theil’s U statistics. Key findings reveal that while unaugmented LSTM models perform poorly relative to a simple average baseline (Theil’s U = 1.38, MAPE = 24.6%), LSTMs enhanced with triple linear interpolation achieve superior predictive accuracy (MAPE = 2.6%, sMAPE = 2.6%, Theil’s U = 0.14). This approach significantly outperforms the benchmark SARIMA model (MAPE = 8.0%, Theil’s U = 0.63), which otherwise demonstrated adequate statistical validity through satisfactory residual diagnostics, including Ljung Box and Shapiro Wilk tests. In conclusion, the study demonstrates that utilizing linear interpolation as an augmentation technique is highly appropriate and effective, enabling deep learning models like LSTMs to accurately capture underlying temporal patterns from limited tourist arrival.
An Investigation on the Edge-gracefulness of Bubble Sort, Bubble Sort Star, and Kulli-Cycle Windmill Graphs John Rafael M. Antalan; Richard Tagle; Aaron Angel; John Loureynz F. Gamurot
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1735-1743

Abstract

A fundamental area of graph theory, graph labeling concerns the assignment of integers to the vertices, edges, or both of a graph under specified constraints. One of the many types of graph labeling is edge-graceful labeling. Edge-graceful labeling requires assigning distinct integers from 1 to q to the edges of a graph G with p vertices and q edges so that the induced vertex labels, obtained by summing the labels of all incident edges modulo p, are pairwise distinct. Now, determining which graph families admit such labeling remains challenging, and this study focuses on the edge-gracefulness of bubble sort graphs, bubble sort star graphs, and Kulli-cycle windmill graphs, whose orders and sizes depend on multiple variables or factorial terms, unlike simpler graphs determined by a single parameter. Using the contrapositive of Lo’s Theorem and number-theoretic techniques, we establish that the bubble sort graph Bn is not edge-graceful whenever the parameter n is not an even integer that is greater than or equal to 4, that the only bubble sort star graphs that have the potential to be edge-graceful are BSn with n ≥ 4, and that W3 is the only edge-graceful Kulli-cycle windmill graph.
Durability Controlled Hydration Mechanisms of High-Volume FABA-Based Binders with Nano Silica and Silica Fume Modification Setia Damayanti; Armin Naibaho; Irfan Ihsani; Saloma; Pio Ranap Tua Naibaho; Jonbi; A.R Indra Tjahjani
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1538-1548

Abstract

High-volume supplementary cementitious materials (SCMs) offer significant potential for reducing clinker consumption and CO2 emissions, but maintaining hydration efficiency and long-term durability remains a major challenge. This study investigated the hydration behavior, microstructural evolution, and transport-related durability of high-volume fly ash–bottom ash (FABA) binders incorporating mechanically activated bottom ash, nano-silica, and silica fume. The binder systems were evaluated using mechanical, transport, and integrated microstructural characterization. The 60% FABA (M1) binder exhibited the optimum performance, achieving a compressive strength of 44.5 MPa at 56 days together with the lowest sorptivity and water absorption. Integrated SEM, XRD, TGA/DTG, and BET/BJH analyses confirmed enhanced secondary hydration, progressive matrix densification, and mesopore refinement, with the highest specific surface area (11.9 m2/g) and the smallest average pore diameter (12.6 nm). These findings demonstrate that the durability of high-volume FABA binders is governed primarily by hydration-induced pore refinement and reduced pore connectivity, providing a scientific basis for the design of durable low-carbon cementitious binders with high clinker replacement.
Facile Synthesis of Magnetic ZIF-67@Fe3O4 Composite with Synergistic Properties for Monolayer Adsorption of Pb(II) Pollutants Evi Maryanti; Wulan Aprilia Syafitri; Eka Angasa; Elfi Yuliza; Nor Kartini Abu Bakar; Lala Adetia Marlina
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1323-1343

Abstract

The development of efficient and easily recoverable adsorbents for heavy metal removal remains a significant challenge in wastewater treatment. In this study, a magnetic ZIF-67@Fe3O4 (ZIFO) composite was successfully synthesized via a simple methanol-assisted in situ method at ambient temperature for the removal of Pb(II) from aqueous solution. The physicochemical properties of the synthesized material were comprehensively characterized using XRD, FTIR, FESEM-EDS, HR-TEM, Raman spectroscopy, BET surface area analysis, XPS, and zeta potential, confirming the successful integration of Fe3O4 into the ZIF-67 framework. Batch adsorption experiments were conducted to evaluate the effects of pH, contact time, and initial Pb(II) concentration on adsorption performance. The results showed that Pb(II) uptake was strongly dependent on solution pH, with optimal removal achieved at pH 6. Under the optimized conditions, ZIFO exhibited an experimental adsorption capacity of 212.69 mg g⁻¹ and achieved up to 99.86% Pb(II) removal. Kinetic analysis revealed that the adsorption process was best described by the pseudo-second-order model (R² = 0.99535), indicating that chemisorption dominated the adsorption mechanism. The equilibrium data were well-fitted by the Langmuir isotherm model (R² = 0.9887), with a maximum monolayer adsorption capacity of 158.73 mg g⁻¹. These findings demonstrate that ZIFO is a fast, efficient, and magnetically separable adsorbent with strong potential for the practical treatment of Pb(II)-contaminated wastewater.
Antibacterial Efficacy of Chitosan Nanoparticles from Musa paradisiaca L. Peel Ethanol Extract against Propionibacterium acnes: Characterization and Identification of the Compounds Wiwik Susanah Rita; Retno Kawuri; Ni Kadek Novita Yulandari
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1634-1645

Abstract

Hijau lumut banana peel (Musa × paradisiaca L.) contains bioactive compounds with antibacterial properties and has potential as a natural anti-acne agent. This study aimed to prepare and characterize chitosan-based nanoparticles incorporating hijau lumut banana peel (HLBP) ethanol extract, evaluate their antibacterial activity against Propionibacterium acnes, and identify their chemical constituents. HLBP extract was obtained by ethanol maceration and subsequently incorporated with chitosan and sodium tripolyphosphate (NaTPP) through an ionic gelation process to produce nanoparticles. The broth microdilution technique was used to determine the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC), while the agar diffusion assay was used to evaluate antibacterial activity. The nanoparticles were characterized using particle size analysis (PSA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and liquid chromatography–tandem mass spectrometry (LC–MS/MS). The nanoparticles exhibited strong antibacterial activity against P. acnes, with inhibition zones of 31.47 ± 0.03 mm and 28.15 ± 0.10 mm for formulations containing 0.5% and 1% chitosan, respectively. The MIC and MBC values were 1.25% and 2.50%, respectively. The optimal formulation containing 0.5% chitosan had a particle size of 721.9 ± 25.57 nm, a polydispersity index of 0.509 ± 0.018, and a zeta potential of −36.2 ± 0.60 mV. Morphological analysis revealed irregular, flattened particles. These findings suggest that chitosan nanoparticles loaded with HLBP exhibit promising antibacterial activity against P. acnes and have potential for use as a natural anti-acne formulation.
Colorimetric Intelligent Film Based on Carboxymethyl Cellulose/Sodium Alginate Incorporated Black Rice Bran Anthocyanins Co-Pigments for Shrimp Spoilage Monitoring Issara Nillaman; Trin Khawsung; Somrak Panphon; Weeraya Treewanjutha
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1287-1299

Abstract

Colorimetric intelligent film for monitoring shrimp spoilage based on carboxymethyl cellulose (CMC)/sodium alginate (SA) and co-anthocyanin extract derived from natural source was fabricated. Juedanor (JD) rice, a black-purple variety cultivated and consumed in Pattani province, Southern Thailand, served as the primary source of anthocyanin in this study. Consequently, utilizing anthocyanin pigments from JD and other plants in indicator films for the detection of food deterioration is an effective approach. Mulberry (M) showed the highest anthocyanin content at 341.275 mg/L, followed by 170.730 mg/L in purple cabbage (PC) and 136.955 mg/L in JD rice. The intelligent films were then fabricated using CMC/SA loading with co-anthocyanin pigment (PC: JD) at a 1:4 ratio. The film incorporating JD extract and purple cabbage established the widespread colour change during pH sensitive test. Further tests were conducted on the film using an ammonia solution to assess shrimp spoilage. Film color (%S, ΔE) and pH showed a high association, suggesting that the films can be used as sensitive markers of shrimp freshness during storage time. The predicted ΔE values closely match the experimental values over the ammonia exposure duration, with a high R² coefficient of 0.985, which signifies a robust association. This study demonstrates the potential of utilizing anthocyanins from the indigenous JD rice variety for intelligent packaging and future food production. The value assigned to this native rice will aid in its utilization, conservation, and additional benefit to the community.
Isolation on Unsaturated Fatty Acids from Terminalia catappa L. Seed Oil Using Urea Crystallization Method as A Basic Material for Dihydroxy Octadecanoic Acid Erin Ryantin Gunawan; Baiq Yusmi Aolinnir Rahmah; Dedy Suhendra; Murniati; Farida Ariani
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1549-1565

Abstract

Dihydroxyoctadecanoic acid (DHOA) is a fatty acid-based compound with industrial and cosmetic applications. This compound can be synthesized through the chemical transformation of unsaturated fatty acids in vegetable oils, including Terminalia catappa L. (TC) seed oil. In this study, DHOA was synthesized and characterized using the unsaturated fatty acid (UFA) fraction of TC seed oil as the precursor. The UFA fraction was enriched by urea crystallization and subsequently subjected to epoxidation and hydroxylation reactions to convert the double bonds into dihydroxy groups through an epoxide intermediate. The UFA fraction was obtained as a viscous yellow liquid, with a maximum yield of 27.14% at a urea-to-fatty acid ratio of 8.57:1 (w/w). The fraction exhibited an iodine value of 74.23 mg I₂ g⁻¹ and a hydroxyl value of 33.66 mg KOH g⁻¹, indicating the presence of unsaturation and hydroxyl groups (−OH). GC-MS analysis showed that the urea crystallization product contained 73.28% unsaturated fatty acids. The resulting DHOA was obtained as a pale yellow semi-solid with an oxirane oxygen content (OOC) of 0.051% and a hydroxyl value of 186.96 mg KOH g⁻¹, indicating a low residual epoxide content and a high concentration of hydroxyl groups. Spectroscopic characterization revealed an O–H absorption band at 3432.84 cm⁻¹ in the FT-IR spectrum, accompanied by the disappearance of the epoxide C–O–C band. The ¹³C NMR spectrum exhibited a resonance at approximately δ 74 ppm, indicating hydroxylated carbon, while the ¹H NMR spectrum showed a resonance at approximately δ 3.3 ppm, corresponding to a methine proton in a –CH–O environment. Overall, these spectroscopic results provide structural evidence for the successful formation of DHOA.
Magnetically Recoverable BiVO4/Fe3O4/g-C3N4 Photocatalyst via One-Pot Hydrothermal Synthesis for Visible-Light Methylene Blue Degradation Anggi Anggraeni; Anung Riapanitra; Kapti Riyani; Tien Setyaningtyas
Science and Technology Indonesia Vol. 11 No. 4 (2026): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/sti.2026.11.4.1387-1405

Abstract

The development of efficient and recyclable photocatalysts offers promising alternatives for wastewater treatment. However, significant challenges remain, including inefficient light utilization for photodegradation and rapid charge-carrier recombination. This study aims to synthesize a distinctive reusable BiVO4/Fe3O4/g-C3N4 (BNFC) photocatalyst with magnetic recovery via a one-pot hydrothermal method for visible-light methylene blue (MB) degradation. The optimal composite, BNFC-0.5, exhibited superior photocatalytic performance, achieving a degradation efficiency of 93.04% under optimal conditions of catalyst composition, pH 9, and 160 minutes of irradiation, with a TOC mineralization efficiency of 42.48%. The high degradation efficiency of the BNFC-0.5 composite is ascribed to its enhanced ability to harvest visible light, facilitate electron excitation with lower energy input, and promote effective electron–hole migration via the proposed Z-scheme configuration. Evaluation of the reactive oxygen species revealed that hydroxyl radicals (•OH) made the greatest contribution to the oxidation of MB. Kinetic assessment of the photocatalytic process revealed that the experimental behavior was adequately described by the Langmuir–Hinshelwood model, indicating a pseudo-first-order degradation pathway. In addition, the photocatalyst maintained a degradation efficiency of 79.32% over four cycles, demonstrating good stability and reusability, which is supported by the composite’s good structural stability. Overall, the findings demonstrate that constructing a ternary heterojunction is an effective strategy for enhancing the composite’s photocatalytic capability. Owing to its high degradation efficiency and reusability, the composite represents a promising candidate for wastewater purification under visible-light conditions.