Claim Missing Document
Check
Articles

Found 12 Documents
Search

ADHESIVE BEHAVIOR OF POLYCAPROLACTONE/HYDROXYAPATITE COATINGS ON 316L STAINLESS STEEL: A DESIGN OF EXPERIMENTS APPROACH Agung Prabowo; Ahmad Fadli; Heni Sugesti; Muh Irwan; Syarifuddin Oko; Gading Bagus Mahardika; Marlinda
Jurnal Crystal : Publikasi Penelitian Kimia dan Terapannya Vol. 7 No. 2 (2025): Literasi Artikel Penelitian Kimia
Publisher : Program Studi Kimia, Fakultas MIPA, Universitas PGRI Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36526/jc.v7i2.6212

Abstract

Enhancing the adhesive strength of bioactive coatings is crucial for improving the mechanical stability of metallic implants. This study investigates the effects of three processing parameters—sonication temperature (X₁), PCL/HA ratio (X₂), and drying time (X₃)—on the adhesive strength of poly(ε-caprolactone)/hydroxyapatite (PCL/HA) composite coatings applied to 316L stainless steel substrates. A full factorial 23 experimental design was employed, and the results were analyzed using analysis of variance (ANOVA) and regression modeling. The adhesive strength response ranged from 19.62 MPa to 63.27 MPa. Among the factors studied, the PCL/HA ratio had the most significant positive effect, while drying time showed a minor influence. Interaction plots and response surface analyses revealed a synergistic effect between sonication temperature and PCL/HA ratio, contributing to improved bonding at the coating-substrate interface. The optimization results yielded a predicted maximum adhesive strength of 25.76 MPa at a desirability score of 0.03, highlighting the complexity of parameter interactions. These findings underscore the importance of processing conditions in tailoring coating performance for biomedical applications.
GC–MS CHARACTERIZATION OF FATTY ACID ALKYL ESTERS IN BIODIESEL PRODUCED FROM WASTE COOKING OIL Gading Bagus Mahardika; Agung Prabowo; Syarifuddin Oko; Muh Irwan; Alvyano
Jurnal Crystal : Publikasi Penelitian Kimia dan Terapannya Vol. 8 No. 1 (2026): Literasi Artikel Penelitian Kimia
Publisher : Program Studi Kimia, Fakultas MIPA, Universitas PGRI Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36526/jc.v8i1.6976

Abstract

This study aims to identify and characterize the major compounds in biodiesel produced through the transesterification of vegetable oils using Gas Chromatography–Mass Spectrometry (GC–MS). The analysis was conducted to evaluate the composition of fatty acid esters—specifically Fatty Acid Methyl Esters (FAME) and Fatty Acid Ethyl Esters (FAEE)—which play a crucial role in determining biodiesel quality. Three biodiesel samples were analyzed, revealing dominant peaks at retention times between 15 and 17 minutes, identified as methyl palmitate (C₁₇H₃₄O₂), methyl oleate (C₁₉H₃₆O₂), and methyl stearate (C₁₉H₃₈O₂). The total content of these major esters ranged from 85% to 92%, indicating an efficient conversion of triglycerides into esters. The resulting chemical profile exhibited a balanced proportion of saturated and unsaturated compounds, providing high oxidative stability and favorable cold flow properties. These findings demonstrate that the produced biodiesel meets the requirements of international standards ASTM D6751 and EN 14214, confirming its potential as an environmentally friendly alternative fuel.
SURFACE AREA DRIVEN CRYSTALLINITY CHANGES OF HYDROXYAPATITE DURING SIMULATED BODY FLUID IMMERSION Agung Prabowo; Ahmad Fadli; Heni Sugesti; Muh Irwan
Jurnal Crystal : Publikasi Penelitian Kimia dan Terapannya Vol. 8 No. 1 (2026): Literasi Artikel Penelitian Kimia
Publisher : Program Studi Kimia, Fakultas MIPA, Universitas PGRI Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36526/jc.v8i1.7420

Abstract

The bioactivity of hydroxyapatite (HA) powders is strongly influenced by surface area and crystallinity. This study evaluates the effect of surface area and Ca/P ratio on the bioactivity of HA through immersion in simulated body fluid (SBF) for 3–21 days. Structural and chemical changes were analyzed using XRD, BET, SEM–EDX, and XRF, with bioactivity assessed from XRD peak intensity at 2θ ≈ 30°, degree of crystallinity, Ca/P ratio, calcium ion concentration, and pH variation. The results show that HA maintained its crystal phase during immersion, with the degree of crystallinity varying between 82% and 96%. An initial decrease in crystallinity and peak intensity indicated early HA dissolution, followed by an increase due to apatite layer formation at intermediate immersion times. Prolonged immersion resulted in reduced crystallinity, attributed to calcium depletion and partial re-dissolution. Higher surface area accelerated calcium ion consumption and enhanced apatite formation, confirming improved bioactivity of HA in SBF
Sustainable Production of Biodiesel Using Eggshell-Derived CaO/K₂O Catalyst: Influence of Process Variables and Factorial Design Analysis Agung Prabowo; Syarifuddin Oko; Muh Irwan; Alvyano; Gading Bagus Mahardika
Eksergi Vol. 22 No. 01 (2026): JANUARY 2026
Publisher : Politeknik Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32497/eksergi.v22i01.7153

Abstract

This study investigates the effects of CaO/K₂O catalyst mass (X₁) and reaction time (X₂) on biodiesel yield produced from waste cooking oil via transesterification. A 2² factorial design was employed to evaluate the main and interaction effects of both parameters. Analysis of variance (ANOVA) confirmed that the developed regression model was statistically significant (p = 0.0253) with a high coefficient of determination (R² = 0.9386), indicating excellent model adequacy. The reaction time (X₂) exhibited the most significant positive effect on biodiesel yield (t = 5.96), while the catalyst mass (X₁) showed a negligible influence. The interaction term (X₁X₂) presented a moderate negative effect, suggesting that excessive catalyst loading combined with longer reaction duration may slightly decrease yield due to soap formation and emulsification. The contour profiler revealed that yield increases with both factors up to an optimum point, after which further catalyst addition provides minimal improvement. The optimum conditions were achieved at a catalyst mass of 4.5 g and a reaction time of 4.5 h, resulting in a biodiesel yield of 70.3%. These findings confirm that reaction time is the dominant factor affecting transesterification efficiency, and that CaO/K₂O derived from waste eggshells serves as an effective and sustainable heterogeneous catalyst.
Integration Of CaO/K₂O Heterogeneous Catalysts with Response Surface Methodology for Efficient Biodiesel Production From Waste Cooking Oil Agung Prabowo; Syarifudin Oko; Muh Irwan; Gading Bagus Mahardika; Heni Sugesti
Jurnal Inovasi Teknik Kimia Vol. 11 No. 2 (2026): APRIL | INTEKA - Jurnal Inovasi Teknik Kimia
Publisher : Fakultas Teknik Universitas Wahid Hasyim

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31942/inteka.v11i2.15449

Abstract

Waste cooking oil (WCO) is a promising low-cost feedstock for biodiesel production; however, its high impurity content and variable composition often limit conversion efficiency, particularly in single-step heterogeneous catalysis. This study addresses this challenge by developing a CaO/K₂O heterogeneous catalyst derived from waste chicken eggshells and optimizing the transesterification process using Response Surface Methodology (RSM). Unlike previous studies primarily focused on yield enhancement, this work integrates statistical optimization with GC–MS-based analysis to elucidate catalyst-dependent selectivity in fatty acid methyl ester (FAME) distribution. The results show that reaction time is the dominant factor influencing biodiesel yield, while catalyst loading has a comparatively minor effect within the investigated range. Under optimal conditions (4.5 g catalyst, 4.5 h), a biodiesel yield of 69.6% was achieved, which is moderate compared to reported values (>85%) but acceptable considering the use of untreated WCO and a low-cost waste-derived catalyst. Fuel properties generally met international standards, although the acid value slightly exceeded the limit due to residual free fatty acids. This study highlights the trade-off between process simplicity and conversion efficiency and provides new insights into structure–activity–selectivity relationships in CaO/K₂O-based systems, offering a practical pathway for sustainable biodiesel production from low-quality feedstocks.
PENGARUH PROSES DEGUMMING MENGGUNAKAN ASAM FOSFAT TERHADAP KARAKTERISTIK FISIKO-KIMIA MINYAK NYAMPLUNG (CALOPHYLLUM INOPHYLLUM) SEBAGAI BAHAN BAKU BIODIESEL Heni Sugesti; Agung Prabowo; Yola Berlistya Hendri; Arya Wiranata; Yogi Chandra
JURNAL TEKNOLOGI KIMIA MINERAL Vol 4 No 2 (2025): JURNAL TEKNOLOGI KIMIA MINERAL
Publisher : Politeknik ATI Makassaar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61844/jtkm.v4i2.1236

Abstract

Minyak nyamplung memiliki potensi besar sebagai bahan baku biodiesel karena kandungan trigliserida yang tinggi. Namun, tingginya kadar gum, fosfatida, air, dan asam lemak bebas (ALB) dapat menurunkan kualitas biodiesel. Penelitian ini bertujuan untuk mengevaluasi pengaruh proses degumming menggunakan asam fosfat terhadap parameter fisiko-kimia minyak nyamplung. Degumming dilakukan dengan variasi konsentrasi asam fosfat (0,1%, 0,3%, 0,5%) dan suhu pemanasan (60 °C dan 70 °C). Parameter yang diuji meliputi densitas, viskositas, kadar air, dan kadar ALB. Hasil penelitian menunjukkan bahwa perlakuan degumming optimal pada konsentrasi asam fosfat 0,3% dan suhu 70 °C menghasilkan penurunan kadar ALB sebesar 66,7% dari 10,5% menjadi 3,1%, penurunan viskositas dari 52,4 cSt menjadi 42,3 cSt, dan pengurangan kadar air dari 0,47% menjadi 0,19%. Dengan demikian, proses degumming secara signifikan meningkatkan kualitas minyak nyamplung sebagai bahan baku biodiesel.
Nanocellulose in Cementitious Composites: Rheology, Buildability, Interlayer Bonding, and Mechanical Performance — A Systematic Literature Review Agung Prabowo; Tegar Abdillah Ramadhan; Ibnu Eka Rahayu
Journal of Chemical Natural Resources Vol. 8 No. 1 (2026): Journal of Chemical Natural Resources (JCNaR)
Publisher : Talenta Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32734/jcnar.v8i1.27151

Abstract

Nanocellulose, comprising cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose, is gaining attention as a bio-based additive for modifying the fresh- and hardened-state behaviour of cementitious composites, yet the evidence remains scattered across cement paste, mortar, geopolymer, ultra-high-performance concrete (UHPC), and 3D-printed systems. This systematic review synthesises available evidence on nanocellulose-modified cementitious composites, focusing on rheology, buildability, interlayer bonding, and mechanical performance. Following the PRISMA 2020 guideline, a search of the ScienceDirect database identified 127 records, of which 37 met the eligibility criteria: primary, English-language, peer-reviewed articles reporting nanocellulose incorporation into a cementitious or geopolymer binder with at least one of the four target outcomes measured. Data on nanocellulose type and dosage, binder system, and reported outcomes were extracted and synthesised narratively. Low-dosage CNC and CNF additions (typically below 0.5 wt% of binder) were consistently associated with increased yield stress and viscosity, delayed or modified hydration, and higher early-age compressive and flexural strength, attributable to internal curing, nucleation, and nanoscale reinforcement; excessive dosages tended to cause agglomeration and porosity increases that offset these gains. Studies addressing buildability and interlayer bonding directly, mostly concerning 3D-printed systems, were comparatively few. The certainty of evidence is limited by heterogeneity in nanocellulose source, dosage, and testing protocol, by reliance on laboratory-scale specimens, and by the restriction of the search to a single database. Nanocellulose is a viable rheology-modifying and strength-enhancing additive for cementitious systems, and dosage optimisation and standardised testing protocols remain priorities for future research. The evidence base is markedly uneven across outcomes (mechanical performance, 35 of 37 studies; rheology, 12; buildability, 6; interlayer bonding, 2), and screening and appraisal relied on titles, abstracts and metadata rather than full-text articles, which the Discussion identifies as the principal limitations on the certainty of these conclusions.
Recent Advances in Cellulose Nanocrystal Production from Oil Palm Empty Fruit Bunch: A Systematic Literature Review of Extraction Methods, Emerging Technologies, Properties, Applications, and Future Perspectives Prabowo, Agung; Puspasari, Febriyati
Indonesian Journal of Chemical Analysis (IJCA) Vol. 9 No. 2 (2026): Indonesian Journal of Chemical Analysis
Publisher : Universitas Islam Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20885/ijca.vol9.iss2.art3

Abstract

Oil palm empty fruit bunch (OPEFB) is a cellulose-rich lignocellulosic residue generated in large quantities by the palm oil industry, particularly in Malaysia and Indonesia, yet remains substantially underutilized. Converting OPEFB into cellulose nanocrystals (CNC) provides an opportunity to valorize this waste into high-value materials. This systematic review synthesized the literature on OPEFB-derived CNC following the PRISMA 2020 framework. Structured searches covering 2015–2026 combined OPEFB, cellulose nanocrystal/nanocrystalline cellulose, and extraction-technology terms. Thirty-nine eligible primary and secondary sources were synthesized through narrative analysis, comparative tables, and a PRISMA flow diagram. Sulfuric acid hydrolysis remains the most extensively studied extraction route, generally producing rod-like CNC with nanometre-scale diameters and crystallinity indices of approximately 55–70%. Emerging deep eutectic solvent (DES) approaches, particularly choline chloride-based systems combined with process intensification or solvent recovery, demonstrate promising reductions in production cost and global warming potential. TEMPO oxidation, enzymatic and ionic-liquid pretreatments, and ultrasonic- or microwave-assisted processes provide alternative advantages in selectivity, mild processing, or energy efficiency. However, trade-offs in yield, processing time, and complexity remain. OPEFB-derived nanocellulose has been explored for cementitious composites, polymer nanocomposites, adsorption, drug delivery, and flexible energy-storage applications. Key gaps include inconsistent reporting of yield and crystallinity, limited OPEFB-specific techno-economic and life-cycle assessments, and scarce pilot-scale validation. Future research should emphasize standardized reporting, solvent-recycling-integrated green extraction, continuous biorefinery processing, and integrated techno-economic and life-cycle assessments to support the development of a circular bioeconomy in palm-oil-producing regions.
EVALUATION OF RIVER WATER QUALITY THROUGH TOTAL SUSPENDED SOLIDS AND TOTAL PHOSPHATE ANALYSIS Agung Prabowo; Hana Nurmuthia Ulfa; Heni Sugesti; Arya Wiranata; Syarifuddin Oko; Ibnu Eka Rahyu
Jurnal Crystal : Publikasi Penelitian Kimia dan Terapannya Vol. 8 No. 2 (2026): Literasi Artikel Penelitian Kimia
Publisher : Program Studi Kimia, Fakultas MIPA, Universitas PGRI Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36526/jc.v8i2.8685

Abstract

River water quality is increasingly threatened by anthropogenic activities that contribute suspended solids and nutrient pollution to aquatic environments. This study aimed to evaluate river water quality through the determination of Total Suspended Solids (TSS) and total phosphate concentrations. TSS was analyzed using the gravimetric method in accordance with SNI 6989.3:2019, while total phosphate was determined by UV–Visible spectrophotometry following SNI 6989.31:2021. The results showed that TSS concentrations ranged from 30–34 mg L⁻¹ in the upstream section and 21–24 mg L⁻¹ in the downstream section. These values complied with the Class II water quality standards established under Government Regulation No. 22 of 2021. In contrast, total phosphate concentrations ranged from 0.795–0.802 mg L⁻¹ upstream and 0.746–0.768 mg L⁻¹ downstream, exceeding the limits for both Class I and Class II waters. The elevated phosphate concentrations indicate significant nutrient enrichment and a potential risk of eutrophication. Quality control evaluation demonstrated satisfactory analytical performance, with acceptable CRM results, recovery of 109.4%, calibration linearity of R² = 0.9991, and precision values within the established acceptance criteria. Overall, the findings indicate that while suspended solids remain within acceptable limits, phosphate pollution represents a significant concern for the studied river and highlights the importance of continuous monitoring and nutrient management strategies to maintain aquatic ecosystem health.
MATERIAL-BASED ASSESSMENT OF IRON AND MANGANESE DISTRIBUTION IN RIVER WATER BY ATOMIC ABSORPTION SPECTROPHOTOMETRY Agung Prabowo; Trial Miftahul Huda; Syarifuddin Oko; Ibnu Eka Rahayu; Heni Sugesti
Jurnal Crystal : Publikasi Penelitian Kimia dan Terapannya Vol. 8 No. 2 (2026): Literasi Artikel Penelitian Kimia
Publisher : Program Studi Kimia, Fakultas MIPA, Universitas PGRI Banyuwangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36526/jc.v8i2.9277

Abstract

River water is a widely used source of surface water whose quality requires regular monitoring, particularly for iron (Fe) and manganese (Mn) concentrations, which originate from natural weathering and anthropogenic activities. This study aimed to determine Fe and Mn concentrations in upstream and downstream river water samples using Atomic Absorption Spectrophotometry (AAS) in accordance with SNI 6989.84:2019, to evaluate the reliability of the results through laboratory quality control parameters, and to compare the measured concentrations with the national river water quality standard under Government Regulation No. 22 of 2021. Upstream and downstream samples, together with a laboratory control sample (LCS), a procedural blank, spiked samples, and a certified reference material (CRM), were digested with nitric acid (HNO₃) and analyzed using flame AAS. The Fe and Mn calibration curves showed coefficients of determination (R²) of 0.9978 and 0.9971, respectively, both exceeding the SNI 6989.84:2019 acceptance criterion of R² ≥ 0.995, and quality control samples met laboratory acceptance criteria. Fe concentrations ranged from 0.1557–0.1594 mg/L upstream and 0.4588–0.4638 mg/L downstream, while Mn was not detected upstream and ranged from 0.5882–0.5915 mg/L downstream. Upstream water met the Class I standard for both parameters, whereas downstream concentrations of both Fe and Mn exceeded the standard. Fe and Mn concentrations increased markedly from upstream to downstream, most plausibly reflecting anthropogenic activities downstream, indicating that downstream water quality requires closer environmental management attention.