Claim Missing Document
Check
Articles

Found 6 Documents
Search

ANALISIS PEMANFAATAN MINYAK TANAH DAN MINYAK KELAPA SEBAGAI BAHAN BAKAR KOMPOR Hamri Hamri; Faizal Habib
JURNAL ILTEK Vol 13, No 01 (2018): ILTEK : Jurnal Teknologi
Publisher : Fakultas Teknik Universitas Islam Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (325.239 KB) | DOI: 10.47398/iltek.v13i01.119

Abstract

Penelitian ini bertujuan untuk memanfaatkan minyak kelapa sebagai bahan bakar kompor dengan bahan bakar minyak tanah, membandingkan selubung api yang terjadi dan emisi dari bahan bakar tersebut, apakah ekonomis minyak nabati dibanding minyak tanah. Penelitian dilakukan dengan menguji bahan bakar, dinyalakan pakai kompor . Kemudian dilakukan pengukuran emisi hasil pembakaran , mengukur temperatur nyala api serta menguji berapa waktu yang untuk menghabiskan bahan bakar dengan volume tertentu. Hasil menunjukkan waktu pembakaran normal untuk minyak tanah 2 menit, minyak kelapa 15 menit, emisi hasil pembakaran tersebut didapatkan CO2 tertinggi pada minyak tanah yaitu 1,06 , dan minyak kelapa adalah 0,54, Waktu untuk menghabiskan bahan bakar dengan volume 200 cc yang lama minyak kelapa 35 menit 5 detik sedang minyak tanah 26 menit 35 detik ,temperatur nyala api, kompor untuk hasil pengukuran 3000 C dengan waktu sentuh dinyala api 1(satu) menit.
Perencanaan Pembangkit Listrik Berbasis Flywheel Ganda Jaya, Muh. Aksan; Hamri, Hamri; Habib, Faisal; Efendi, Rustam
Jurnal Mekanova : Mekanikal, Inovasi dan Teknologi Vol 8, No 1 (2022): April
Publisher : universitas teuku umar

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (646.456 KB) | DOI: 10.35308/jmkn.v8i1.4126

Abstract

Energi listrik merupakan kebutuhan vital di abad 21 ini. Sumber energi listrik selama ini bersumber dari energi fosil terus mengalami penurunan pasokan dan berbagai macam isu lingkungan akan penggunaan energi fosil. Salah satu yang dapat dilakukan untuk mengatasi permasalahan tersebut adalah menggunakan energi yang memungkin diambil kembali. Flywheel Energy Storage System merupakan salah satu yang bisa dikembangkan, dengan adanya energi kinetik yang dimiliki oleh flywheel memungkin untuk menaikkan kapasitas penyediaan energi. Tujuan penelitian ini adalah merancang dan menguji pembangkit energi berbasis flywheel. Metode perencanaan adalah metode perhitungan elemen mesin. Hasil perhitungan perencanaan pembangkit listrik berbasis flywheel didapatkan kecepatan sudut flywheel (ω) sebesar 181,42 rad/s, momen inersia 0,35 kg/m², torsi 4,28 Nm, energi kinetik 5.825 Joule. Perbandingan putaran (i) motor listrik-flywheel sebesar 1,3 dan flywheel-generator 1, ukuran V Belt motor listrik-flywheel adalah A-43 dan flywheel-generator A-45.
The Analysis of the Effect of Low Hydrogen SMAW Electrode Drying Temperature on the Bending Strength of Low Carbon Steel Baso Palinrungi, Andi; Halim Asiri, Muhammad; Habib, Faisal
Jurnal Sains dan Teknik Terapan Vol. 3 No. 2 (2025): Jurnal Sains dan Teknik Terapan
Publisher : Unit Penelitian dan Pengabdian Kepada Masyarakat, AK-Manufaktur Bantaeng

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Pemilihan jenis elektroda pada pengelasan dapat menentukan kualitas hasil lasan. Elektroda low hydrogen dipastikan yang akan digunakan selalu kering, sebaiknya berada di lingkungan bebas dari kelembaban atau dalam kondisi siap pakai dan kering. Jika elektroda telah menyerap air melebihi batas yang diperbolehkan, maka elektroda tersebut harus dipanaskan sebelum digunakan pada saat mengelas untuk menghilangkan kandungan air. Penelitian ini bertujuan untuk menganalisa kekuatan bending pada material baja karbon rendah ST 37 pada pengelasan SMAW dengan suhu pengeringan. Hasil pengelasan dengan pemanasan elektroda dengan perlakuan panas 1500 C, 3000C dan tanpa perlakuan panas selama masing-masing 60 menit diuji menggunakan uji bending. Dari hasil data pengujian dan diolah dalam persamaan diperoleh pada pengujian bending didapatkan nilai tegangan bending tertinggi pada elektroda panas 3000C sebesar 1819,99 N/mm2 dan yang terendah pada elektroda tanpa perlakuan panas sebesar 574.43 N/mm2. Hasil penelitian ini menunjukkan bahwa pengaruh suhu pengering elektroda low hydrogen sangat berpengaruh terhadap kekuatan bending dari hasil pengelasan sesuai rekomendasi pabrikan elektroda.
EVALUASI DINAMIKA TITIK BERAT KURSI RODA PADA KEMIRINGAN JALAN 20° BERDASARKAN SIMULASI DAN PERHITUNGAN ANALITIS Usman; Faisal Habib; Hairun Apriadi Ramadhan; Angga Tegar Setiawan
JURNAL ILMIAH MOMENTUM Vol 21 No 2 (2025): Oktober 2025
Publisher : Universitas Wahid Hasyim

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36499/mim.v21i2.14195

Abstract

According to data from Indonesia’s Central Statistics Agency (BPS) and the Ministry of Social Affairs [1,2], over 5.3 million individuals with physical disabilities face mobility challenges, particularly when using wheelchairs on sloped terrain. A major issue is the instability of manual wheelchairs on steep inclines, which increases the risk of tipping and requires assistance. This study aims to evaluate the dynamics of center of gravity (COG) shifts in wheelchairs on road slopes up to 20°, using simulation and analytical calculation methods. The methodology includes literature review, wheelchair type surveys, slope condition observations, and system kinematics and force analysis. Results show that the COG remains within a safe zone during slope transitions, with reaction force distribution remaining stable between 87.63 and 93.26 kg. Pressure on the front and rear wheels remains within safety limits, avoiding deformation or loss of traction. The highest power consumption recorded was 144.56 watts during ascent, which significantly decreased on flat or descending terrain. The findings suggest that the proposed wheelchair design is adaptive, safe, and energy-efficient, making it suitable for users with disabilities navigating urban environments with varied topography.
Lower-temperature sintering and optimization ratio of SiO2-TiO2-B2O3-ZnO glass ceramic coatings for energy efficient tile Faisal Habib; Mahmuddin Mahmuddin; Muhammad Imam Arif
Jurnal Polimesin Vol 24, No 2 (2026): April
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v24i2.8846

Abstract

Conventional ceramic tile glazes typically require firing temperatures above 1180°C, leading to high energy consumption and production costs. Despite extensive studies on composition and crystallization, integrated optimization of oxide balance, crystallization kinetics, and energy efficiency at reduced temperatures remains limited. This study aims to develop and optimize SiO₂–TiO₂–B₂O₃–ZnO glass-ceramic coatings through a combined experimental and data-driven approach to achieve enhanced mechanical performance at lower sintering temperatures. A series of compositions were formulated using locally sourced raw materials and sintered at 1080–1160°C. The crystallization behavior was first characterized using Differential Scanning Calorimetry (DSC) and fitted with the Johnson–Mehl–Avrami–Kolmogorov (JMAK) kinetic model. Phase evolution and microstructure were examined through X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Mechanical and optical performance were evaluated via Vickers microhardness testing, gloss measurement, and bulk density analysis. Multivariate regression and energy-performance correlation analysis were conducted using MATLAB. The results demonstrate that increasing TiO₂ content promotes heterogeneous nucleation, lowering crystallization peak temperature from 785°C to 725°C and increasing enthalpy release from 48 to 64 J/g. The Avrami exponent (n = 1.75–1.95) indicates three-dimensional crystal growth with mixed nucleation mechanisms. Vickers hardness improved from 515 HV to 670 HV with increasing TiO₂ concentration, while gloss moderately decreased due to enhanced crystalline fraction. The optimal composition (55 mol% SiO₂, 8 mol% TiO₂, 2 mol% B₂O₃, 2 mol% ZnO) achieved 648 HV, 63 GU, and a 12% reduction in firing energy, demonstrating the feasibility of energy-efficient coating design.
Operating-Point Optimization of an Organic Rankine Cycle Under Variable Waste Heat Conditions: An Energy Exergy Mahmuddin, Mahmuddin; Habib, Faisal; Pakka, Hariani
Jurnal Rekayasa Mesin Vol. 17 No. 2 (2026)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/

Abstract

Low-grade waste heat varies in thermal quality and can shift an Organic Rankine Cycle (ORC) away from favorable operating conditions. This study evaluates operating-point optimization of a single-pressure subcritical ORC using integrated energy and component-level exergy analyses. R245fa was used as the reference fluid, while R245fa/R1233zd(E) mixtures were examined for composition and temperature-matching effects. At a heat-source temperature of 150 °C, increasing evaporation pressure from 1.5 to 3.0 MPa raised thermal efficiency from 11.912% to 14.311%. A pressure of 2.8 MPa was retained as the reference near-optimal point, yielding 33.976 kW net power on a 1.0 kg/s working-fluid basis, 14.164% thermal efficiency, and 48.739% exergy efficiency. Increasing pressure to 3.0 MPa improved net power by only 0.57% while reducing the evaporator hot-end temperature difference from 10.7 to 7.0 K. At 2.8 MPa, total exergy destruction was 35.734 kW, distributed among the evaporator (54.16%), expander (23.49%), condenser (20.58%), and pump (1.77%). The 0.3/0.7 R245fa/R1233zd(E) mixture was the first feasible composition under the 5 K minimum temperature-difference constraint and gave the highest feasible thermal efficiency, 14.636%, or 0.472 percentage points above pure R245fa, with a temperature glide of 0.528 K. This modest gain is associated with composition-dependent source–fluid temperature matching under the imposed feasibility constraint rather than an unconstrained interior optimum. Under a 140-160 °C heat-source variation, operating-point adjustment limited the maximum relative net-power deviation to approximately ±1.8%. Raising condensation temperature from 30 to 40 °C reduced both thermal and exergy efficiencies by about 8.96%, while increasing expander isentropic efficiency from 0.80 to 0.88 raised exergy efficiency from 48.739% to 53.990%. The study integrates operating-point adaptation, mixture assessment, and component-level thermodynamic diagnosis within a simple ORC framework for variable waste-heat recovery.