Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Simetris

Analisis Tegangan Pada Rangka Mobil Off Road Menggunakan Metode Elemen Hingga Dengan Software SolidWorks Suryanto, Hendri; Herraprastanti, Eva Hertnacahyani
SIMETRIS Vol 17 No 1 (2023): Simetris
Publisher : Sekolah Tinggi Teknologi Ronggolawe Cepu

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51901/simetris.v17i1.317

Abstract

The chassis is the main part of a vehicle that functions to hold all components and passengers and must be able to withstand the loads that occur without experiencing excessive deflection or deformation. Off-road cars are designed to be able to pass on unpaved roads or terrain or rocky surfaces. With such terrain, it will put an excessive burden on the car, especially on the frame. The frame will be subjected to greater bending and torsional loads if the car is used on an uneven surface. For that we need a frame that is strong and rigid so that it is safe for the driver and other car components. In this study, an analysis of the stress that occurs on the frame of the TM D3 Off-Road Car was carried out to determine its strength. The analysis was carried out numerically using the finite element method using SolidWorks software. The results of the analysis show that under a static load of 3000 N, the frame is still in a safe condition because the stress that occurs in the frame is below the yield stress value of the material used, while at a torsional loading of 500 N.m, the frame is in an unsafe condition because the stress that occurs exceeds the value the yield stress of the material used. After modifying the frame, the simulation results with 500 N.m torsional loading show that the stress that occurs in the frame is in a safe condition.
Pengaruh Berat Roller Pada Countinuously Variable Transmission (CVT) Terhadap Performa Sepeda Motor Febrian, Yusuf Aditya; Suryanto, Hendri; Herraprastanti, Eva Hertnacahyani
SIMETRIS Vol 18 No 1 (2024): SIMETRIS
Publisher : Sekolah Tinggi Teknologi Ronggolawe Cepu

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51901/simetris.v18i1.410

Abstract

Pada motor matic dipengaruhi oleh beberapa faktor salah satunya yaitu bergeraknya sliding sheave yang ditekan oleh pemberat atau roller berdasarkan putaran mesin, jika pemberat atau roller semakin ringan maka menyebabkan puli lebih melebar. Maka perlu dilakukan penyesuaian berat roller dengan tujuan agar mendapatkan tenaga yang optimal sehingga mampu melakukan akselerasi yang lebih tinggi. Motor yang akselerasinya tinggi membutuhkan lebih banyak bahan bakar untuk menghasilkan tenaga yang lebih besar. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh berat roller CVT terhadap torsi, daya dan konsumsi bahan bakar spesifik. Untuk pengujian torsi dan daya dilakukan dengan alat dinojet 250i pengujian dilakukan pada rpm 5500 rpm, 6000 rpm, 6500 rpm dan 7000 rpm. Untuk pengujian konsumsi bakar spesifik alat yang digunakan adalah burret, pengujian dilakukan dengan cara melihat pengurangan bahan bakar pada burret selama 30 detik dilakukan pada rpm 5500 rpm, 6000 rpm, 6500 rpm dan 7000 rpm. Dari data pengujian torsi dan daya menunjukkan bahwa masing-masing roller akan mengalami peningkatan grafik data pengujian torsi dan daya disetiap rpm dan dari data pengujian konsumsi bahan bakar spesifik menunjukkan bahwa masing-masing roller akan mengalami penurunan grafik data pengujian konsumsi bahan bakar spesifik di setiap rpm.