Mufakhir, Fika Rofieq
Unknown Affiliation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Pengaruh kondisi operasi proses pemekatan litium dari geothermal brine sintetis dengan metode Direct Contact Membrane Distillation (DCMD) Utomo, Dimas Bagus Galih; Sujoto, Vincent Sutresno Hadi; Astuti, Widi; Mufakhir, Fika Rofieq; Tampubolon, Aron Pangihutan Christian; Syamsumin; Utama, Andhika Putera; Petrus, Himawan Tri Bayu Murti; Fahrurozi, Mohammad; Sutijan
Jurnal Rekayasa Proses Vol 17 No 1 (2023): Volume 17, Number 1, 2023
Publisher : Jurnal Rekayasa Proses

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/jrekpros.79559

Abstract

Penggunaan lithium dalam pembuatan baterai meningkat secara signifikan dalam beberapa tahun terakhir. Peningkatan kebutuhan tersebut memerlukan sumber litium lebih yang dapat dimanfaatkan. Target dari penelitian ini adalah untuk memekatkan konsentrasi dari litium sebelum dilakukan proses pemisahan lainnya. Perangkat direct contact membrane distillation (DCMD) ini menggunakan perbedaan tekanan uap dikedua sisi membran sebagai driving force. Larutan umpan divariasikan pada berbagai suhu dan laju alir sedangkan suhu sisi permeat dipertahankan pada 25 °C. Suhu umpan divariasikan pada 60, 50, dan 40 °C dan laju alir umpan pada 420, 260, dan 180 ml/menit. Untuk mengurangi penyumbatan pada membran, digunakan geothermal brine sintetis. Penelitian yang telah dilakukan menunjukkan bahwa suhu operasi dan laju alir memberikan pengaruh yang signifikan pada proses pengkonsentrasian lithium dari geothermal brine sintetis. Kenaikan suhu operasi dan laju alir umpan pada sistem DCMD menunjukkan adanya kenaikan konsentrasi lithium pada retentat dan fluks permeat yang dihasilkan. Hasil optimum diperoleh pada suhu 60 °C dengan laju alir 420 ml/menit. Perolehan rerata fluks tertinggi dicapai pada 60 °C sebesar 7,3 L/m2 /hour (LMH), di ikuti suhu 50 dan 40 °C sebesar 5,3 dan 2,7 L/m2 /hour (LMH). Selain fluks diperoleh juga nilai Liquid enter pressure (LEP) 7,3 bar yang menunjukkan kekuatan membran dalam menahan tekanan uap, sehingga tidak terjadi wetting selama proses.
Manganese Recovery from Hydrocracking Spent Catalyst Using Citric Acid and Its Kinetics Petrus, Himawan Tri Bayu Murti; Sari, Dewi Purnama; Yuliansyah, Ahmad Tawfiequrrahman; Mufakhir, Fika Rofieq; Astuti, Widi; Iskandar, Yusuf; Bratakusuma, Danu; Virdhian, Shinta
International Series on Interdisciplinary Science and Technology Vol. 4 No. 2 (2019)
Publisher : Universitas Lampung

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Aiming for recovery and kinetics of manganese from hydrocracking spent catalyst using citric acid, this study has been conducted. In order to justify the performance of citric acid, a comparative study has been conducted using both inorganic and organic acids in the same pH condition of about 1,5 - 2. pH was used as the controlled variable due to the different dissociation degree of the acids. In comparison to that of inorganic acid, the manganese recovery is four times higher when citric acid was applied. Acetic acid performed 33% lower in manganese recovery compared to the citric acid. Moreover, kinetics study was conducted with three varying temperature of 30C, 60C, and 90C. From the resulted data, it can be concluded that the kinetics of mengan leaching from spent catalyst using citric acid is in accordance to the shrinking core model. The controlling step is product diffusion with activation energy (Ea) of about 23.27 kJ/mol calculated using Arrhenius expression. With higher selectivity and leaching reagent which is harmless to the environment, the application of citric acid in manganese leaching from spent catalyst will indeed support the enactment of sustainable development aspect in recycle processing