Garuda - Garba Rujukan Digital

PENGARUH KONSENTRASI BORAKS PADA PENGAWETAN KAYU TUMIH (Combretocarpus rotundatus (Miq.) Danser) DALAM KETAHANANNYA TERHADAP SERANGAN RAYAP KAYU KERING (Cryptotermes cynocephalus Light.) Wahyu Supriyati; Gloria Putri Novelia M; Yanciluk; Alpian
Agrienvi: Jurnal Ilmu Pertanian Vol. 15 No. 1 (2021): Journal Agrienvi
Publisher : Agrienvi: Jurnal Ilmu Pertanian

Show Abstract | Download Original | Original Source | Check in Google Scholar

Tumih wood (Combretocarpus rotundatus (Miq.) Danser) was found abundanly in Central Kalimantan but only has durable class 3. The preservation needed to extend the life service of the wood. The aims of this research was to know the effect of borax preservatives at various concentrations to the retention of Tumih wood, to know the mortality of dry wood termite (Cryptotermes cynocephalus Light) and weight loss of the tumih wood against the termite. Wood testing against drywood termites reffer to the Indonesian National Standard (SNI 01-2707-2006). Data analysis using a Completely Randomized Design (CRD) of 4 concentrations and 3 replications. The result showed that concentration has significant effect on retention. The highest retention value was found at concentration of 7% (B3) that was 10,34 kg/m3. Preservative concentration had a significant effect to termite mortality. The concentration of 3% was able to against the termite attacks on Tumih wood (mortality value was 93,3%). Concentration has not significant effect to the weight loss of Tumih wood

Pengaruh Bagian Kayu dan Ketebalan Stiker pada Pengeringan Alami terhadap Sifat Fisika Kayu Gerunggang (Cratoxylon arborescens Bl.) Luhan, Gimson; Damiri, M; Joni, Herwyn; Yanciluk; Mujaffar, Ahmad
Jurnal Hutan Tropika Volume 14 Nomor 1 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36873/jht.v14i1.333

The existence of the wood needs to be considered so that the use of wood for a particular use needs to pay attention to the quality of wood, both for wood for building materials, furniture, panels, crafts and so on. The weakness of wood compared to substitutes such as metal and concrete is its hygroscopic nature. The aim of this study was to determinethe effect of wood parts treatment on axial direction and sticker thickness on natural drying time on changes in the physical properties of gerunggang wood (Cratoxylon arborescens Bl.). While the expected benefits are as information material for the wood processing industry and wood users to be able to dry the wood properly. The research was conducted at the Forest Products Technology Laboratory for 3 months. Cutting is done by dividing the length of the stem into 3 (three) equal parts in the axial position, namely the base (a1), middle (a2) and end (a3), each cut length Â± 2 m for the board (example drying test) ) with Â± 2 cm thick and Â± 15 cm long for example test of moisture content, specific gravity and shrinkage. The results showed that the average value of fresh water content, saturated point moisture content, and air dry water content had a tendency to decrease in value from the base to the end of the stem. The natural dryingtime has an average tendency to dry more quickly from the base to the end of the stem, with drying times ranging from 28-40 days or an average of 33 days. The end of the wood with a thickness of 3,5 cm sticker dries faster (25 days) with a defect 1 broken edge. Parts of wood with a sticker thickness of 3,5 cm dries faster than the thickness of the stickers 2,5 cm and 1,5 cm. The results of measurements of (BJ) density of gerunggang wood averaged 0,55 including the medium group (BJ 0,4-0,6). Specific gravity has a tendency to increase in value from the base to the end of the rod with an uneven pattern including type 3. The tangential and radial direction shrinkage ratio of 1,88 is included in the medium classification, then gerunggang wood can be used for boards and lightweight construction under the roof, crates, furniture, plywood andconcrete molds. It is recommended to conduct further research on the possibility of using gerunggang wood for artificial boards.Keywords: drying, wood parts, physical properties, gerunggang.

KELAS KUAT KAYU TUMIH (Combretocarpus rotundatus (Miq.) Danser) BERDASARKAN BAGIAN BATANG (The the physical and mechanical Properties of Tumih Wood Based on Section Stem) Luhan, Gimson; Joni, Herwin; Johansyah; Yanciluk; Mujaffar, Ahmad
Jurnal Hutan Tropika Volume 14 Nomor 2 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36873/jht.v14i2.1150

Tumih wood (Combretocarpus rotundatus (Miq.) Danser) is classified as an unknown type of wood which is widely grown in peat swamp forests in Central Kalimantan. This study aims to analyze the physical properties and mechanical properties of wood in axial and radial directions so that they can be utilized properly. The results of the study resulted in fresh water content and dry air content of wood air, each of which was 71,58% and 19,33%, kiln dry weight 0,72, tangential shrinkage 9,68%, radial shrinkage 5,02% and longitudinal shrinkage 0,19%. Testing of mechanical properties resulted in a flexural firmness of 618,33 kg/cm2, compressive strength parallel to the fiber 333,27kg/cm2, shear constancy 92,02 kg/cm2, hardness 355,60 kg/cm2, and stiffness at 19,50kg/cm2. Based on the Indonesian Wood Construction Regulations Standard (PKKI) NI 5-1961 tumih wood is included as a strong class III of Indonesian wood, so it is quite well used for home building raw materials, beams, floor and wall boards, door/window frames, and furniture.

KARAKTERISTIK ARANG AKTIF AKASIA (ACACIA MANGIUM WILLD) YANG DIAPLIKASIKAN SEBAGAI BAHAN UNTUK MENINGKATKAN KUALITAS AIR Purba, Elma Wona; Alpian; Yanciluk; Supriyati, Wahyu
Jurnal Hutan Tropika Volume 14 Nomor 2 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36873/jht.v14i2.1154

The production volume or amount of Acacia wood used is generally low compared to the volume of wood harvested. Not a few woods that are cut cause wood harvesting waste such as branches and twigs. One of the uses is processing the waste into activated charcoal. Activated charcoal is charcoal whose cavities or pores are cleaned from other compounds so that the adsorption power of liquids and gases increases. This research uses the Acacia wood of the stem, branches and twigs which is first through the carbonization process and then used as activated charcoal. The active charcoal testsinclude yield, moisture content, volatile matter content, ash content, carbon bound content, absorption of benzene, absorption of iodine and absorption of methylene blue. Acacia quality test results of the stem, branches and twigs show that the activated charcoal of the stem has better quality than the active charcoal of branches and twigs. Overall the results of testing the quality of activated charcoal not all treatments meet the requirements of SNI 06-3730-1995, but when compared with the requirements of the quality of pharmaceutical chemistry, all tests for each treatment meet the quality standard requirements. The application of activated charcoal to drilled well water does not all improve water quality but still qualifies the drinking water quality standards Minister of Health Regulation No: 416/Menkes/Per/IX /1990.

Pengaruh Bagian Kayu dan Ketebalan Stiker pada Pengeringan Alami terhadap Sifat Fisika Kayu Gerunggang (Cratoxylon arborescens Bl.) Gimson Luhan; M Damiri; Herwyn Joni; Yanciluk; Ahmad Mujaffar
Jurnal Hutan Tropika Vol 14 No 1 (2019): Volume 14 Nomor 1 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

The existence of the wood needs to be considered so that the use of wood for a particular use needs to pay attention to the quality of wood, both for wood for building materials, furniture, panels, crafts and so on. The weakness of wood compared to substitutes such as metal and concrete is its hygroscopic nature. The aim of this study was to determinethe effect of wood parts treatment on axial direction and sticker thickness on natural drying time on changes in the physical properties of gerunggang wood (Cratoxylon arborescens Bl.). While the expected benefits are as information material for the wood processing industry and wood users to be able to dry the wood properly. The research was conducted at the Forest Products Technology Laboratory for 3 months. Cutting is done by dividing the length of the stem into 3 (three) equal parts in the axial position, namely the base (a1), middle (a2) and end (a3), each cut length ± 2 m for the board (example drying test) ) with ± 2 cm thick and ± 15 cm long for example test of moisture content, specific gravity and shrinkage. The results showed that the average value of fresh water content, saturated point moisture content, and air dry water content had a tendency to decrease in value from the base to the end of the stem. The natural dryingtime has an average tendency to dry more quickly from the base to the end of the stem, with drying times ranging from 28-40 days or an average of 33 days. The end of the wood with a thickness of 3,5 cm sticker dries faster (25 days) with a defect 1 broken edge. Parts of wood with a sticker thickness of 3,5 cm dries faster than the thickness of the stickers 2,5 cm and 1,5 cm. The results of measurements of (BJ) density of gerunggang wood averaged 0,55 including the medium group (BJ 0,4-0,6). Specific gravity has a tendency to increase in value from the base to the end of the rod with an uneven pattern including type 3. The tangential and radial direction shrinkage ratio of 1,88 is included in the medium classification, then gerunggang wood can be used for boards and lightweight construction under the roof, crates, furniture, plywood andconcrete molds. It is recommended to conduct further research on the possibility of using gerunggang wood for artificial boards.Keywords: drying, wood parts, physical properties, gerunggang.

KELAS KUAT KAYU TUMIH (Combretocarpus rotundatus (Miq.) Danser) BERDASARKAN BAGIAN BATANG (The the physical and mechanical Properties of Tumih Wood Based on Section Stem) Gimson Luhan; Herwin Joni; Johansyah; Yanciluk; Ahmad Mujaffar
HUTAN TROPIKA Vol 14 No 2 (2019): Volume 14 Nomor 2 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

Tumih wood (Combretocarpus rotundatus (Miq.) Danser) is classified as an unknown type of wood which is widely grown in peat swamp forests in Central Kalimantan. This study aims to analyze the physical properties and mechanical properties of wood in axial and radial directions so that they can be utilized properly. The results of the study resulted in fresh water content and dry air content of wood air, each of which was 71,58% and 19,33%, kiln dry weight 0,72, tangential shrinkage 9,68%, radial shrinkage 5,02% and longitudinal shrinkage 0,19%. Testing of mechanical properties resulted in a flexural firmness of 618,33 kg/cm2, compressive strength parallel to the fiber 333,27kg/cm2, shear constancy 92,02 kg/cm2, hardness 355,60 kg/cm2, and stiffness at 19,50kg/cm2. Based on the Indonesian Wood Construction Regulations Standard (PKKI) NI 5-1961 tumih wood is included as a strong class III of Indonesian wood, so it is quite well used for home building raw materials, beams, floor and wall boards, door/window frames, and furniture.

KARAKTERISTIK ARANG AKTIF AKASIA (ACACIA MANGIUM WILLD) YANG DIAPLIKASIKAN SEBAGAI BAHAN UNTUK MENINGKATKAN KUALITAS AIR Elma Wona Purba; Alpian; Yanciluk; Wahyu Supriyati
HUTAN TROPIKA Vol 14 No 2 (2019): Volume 14 Nomor 2 Tahun 2019
Publisher : Jurusan Kehutanan, Fakultas Pertanian Universitas Palangka Raya

The production volume or amount of Acacia wood used is generally low compared to the volume of wood harvested. Not a few woods that are cut cause wood harvesting waste such as branches and twigs. One of the uses is processing the waste into activated charcoal. Activated charcoal is charcoal whose cavities or pores are cleaned from other compounds so that the adsorption power of liquids and gases increases. This research uses the Acacia wood of the stem, branches and twigs which is first through the carbonization process and then used as activated charcoal. The active charcoal testsinclude yield, moisture content, volatile matter content, ash content, carbon bound content, absorption of benzene, absorption of iodine and absorption of methylene blue. Acacia quality test results of the stem, branches and twigs show that the activated charcoal of the stem has better quality than the active charcoal of branches and twigs. Overall the results of testing the quality of activated charcoal not all treatments meet the requirements of SNI 06-3730-1995, but when compared with the requirements of the quality of pharmaceutical chemistry, all tests for each treatment meet the quality standard requirements. The application of activated charcoal to drilled well water does not all improve water quality but still qualifies the drinking water quality standards Minister of Health Regulation No: 416/Menkes/Per/IX /1990.

Sifat Fisika Mekanika Briket Arang dengan Komposisi Jenis Kayu Gerunggang (Cratoxylon arborescens) dan Kayu Tumih (Combretocarpus rotundatus) Alpian Alpian; Raynold Panjaitan; Adi Jaya; Yanciluk Yanciluk; Wahyu Supriyati Supriyati; Emmy U. Antang
Daun: Jurnal Ilmiah Pertanian dan Kehutanan Vol 7 No 1 (2020): Daun: Jurnal Ilmiah Pertanian dan Kehutanan
Publisher : Institute for Researches and Community Services Universitas Muhammadiyah Palangkaraya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33084/daun.v7i1.1602

Energy is a major component in human daily life so it is needed in daily activities and production. The main source of energy used today comes from fossils such as petroleum, natural gas and coal which are non-renewable, unsustainable, limited in existence and can damage the environment. One of the more environmentally friendly and renewable energy substitutes is charcoal briquettes. The raw material used for the manufacture of charcoal briquettes is charcoal powder from biomass waste in land clearing in the Village of Kalampangan, Palangka Raya City. The fire burn the Kalampangan urban area in 2015. The burning area makes succession and overgrown of pioneer plants such as Gerunggang and Tumih that cannot use maximum. Both types of wood can be used as material for making charcoal briquettes. The purpose of this study is to determine the physical and mechanical properties of charcoal briquettes produced from biomass waste without burning fuel with several raw material compositions from Gerunggang and Tumih charcoal powders. The charcoal briquettes refer to the Indonesian National Standard (SNI 01-6235-2000) and ESDM Permen No. No. 047 of 2006. The number of treatments was 5 (T100: G0; T25: G75; T50: G50; T75: G25 and T0: G100) of 3 replications. The composition with the most potential test results in accordance with the both of standards that used is the composition of T100: G0 with a lower moisture content of 10.10%, density 0.98 g/cm3, and compressive strength 25.68 kg/cm2.

PENGARUH KONSENTRASI BORAKS PADA PENGAWETAN KAYU TUMIH (Combretocarpus rotundatus (Miq.) Danser) DALAM KETAHANANNYA TERHADAP SERANGAN RAYAP KAYU KERING (Cryptotermes cynocephalus Light.) Wahyu Supriyati; Gloria Putri Novelia M; Yanciluk; Alpian
Agrienvi: Jurnal Ilmu Pertanian Vol. 15 No. 1 (2021): Journal Agrienvi
Publisher : Agrienvi: Jurnal Ilmu Pertanian

Show Abstract | Download Original | Original Source | Check in Google Scholar

Tumih wood (Combretocarpus rotundatus (Miq.) Danser) was found abundanly in Central Kalimantan but only has durable class 3. The preservation needed to extend the life service of the wood. The aims of this research was to know the effect of borax preservatives at various concentrations to the retention of Tumih wood, to know the mortality of dry wood termite (Cryptotermes cynocephalus Light) and weight loss of the tumih wood against the termite. Wood testing against drywood termites reffer to the Indonesian National Standard (SNI 01-2707-2006). Data analysis using a Completely Randomized Design (CRD) of 4 concentrations and 3 replications. The result showed that concentration has significant effect on retention. The highest retention value was found at concentration of 7% (B3) that was 10,34 kg/m3. Preservative concentration had a significant effect to termite mortality. The concentration of 3% was able to against the termite attacks on Tumih wood (mortality value was 93,3%). Concentration has not significant effect to the weight loss of Tumih wood

Analysis of Flood Vulnerability using Geographic Information Systems in the Kahayan Watershed, Gunung Mas District, Central Kalimantan: Analisis Tingkat Kerawanan Banjir Menggunakan Sistem Informasi Geografis Pada DAS Kahayan Kabupaten Gunung Mas, Kalimantan Tengah Hendrik Segah; Alfredo Liano; Santosa Yulianto; Setiarno Setiarno; Yanciluk Yanciluk
Journal of Peat Science and Innovation Vol. 1 No. 1 (2022): Journal of Peat Science and Innovation: June 2022
Publisher : Center for Development of Science, Technology and Peatland Innovation (PPIIG), University of Palangka Raya

This study aims to determined the level of flood vulnerability and most dominant factors that cause flood vulnerability in the Kahayan watershed, Gunung Mas District in Central Kalimantan. This study used a quantitative method by looking at the effect of each flood parameter to determine the level of flood vulnerability or vulnerable areas in the Kahayan watershed. The results are based on research carried out in the Kahayan watershed which has 4 levels of flood vulnerability classification: low vulnerability, medium vulnerability, high vulnerability, and very high vulnerability. The high level of flood vulnerability was the largest area with an area of 568.146 ha or 65,25% of the Kahayan watershed area of Gunung Mas District as a whole, the medium vulnerability level was 185.634 ha (21,32%), very high vulnerability level was 61,716 ha (7,09 %), and low vulnerability was the area with the smallest area of 55.231 ha (6,34%) of the total area of the Kahayan watershed in this district. The sub-districts with the highest area at a very high level of flood susceptibility were Tewah sub-district and Kurun sub-district. The most dominant factor that causes flood vulnerability in the Kahayan watershed area of Gunung Mas District was the slope that reaches 0-8% which was included in the flat category, with 3 land criteria, namely floodplain areas, river border areas, and basin areas.

Title

Found 15 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 15 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 15 Documents
Search