Garuda - Garba Rujukan Digital

Usulan Penurunan Tingkat Kecacatan Produk Sosis Ayam di PT Charoen Pokphand Indonesia -, Samuel; -, Felecia
Jurnal Titra Vol 3, No 1 (2015)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (78.005 KB)

PT Charoen Pokphand Indonesia is one of Indonesiaâs producer of poultry feed, day old chicks and processed chicken. This research is conducted in sausages plant in Surabaya which produced chicken and beef sausages. Chicken sausages have several types of defects like wrinkled (0,9%), fungus (0,04%), and reject cooking (0,34%). The purpose of this research is to find the defectâs root cause and to propose solutions to reduce chicken sausages defects.DMAIC is used as a method to find problemâs root cause and solution in this research along with interview and direct field observation. It is found that defects caused by operator lack of focus during operation, no quality inspection for PVDC plastic, machine breakdown and no standardized working procedure.This research proposed the company to give morning briefing for operators, quality inspection by quality control department for PVDC plastic, designing tray separator, designing checklist form, downtime form, and work instruction. It is expected to reduced chicken sausages defects up to 1,28%.

Library for the Digital Natives Generation: What to do? Halim, Siana; Wulandari, Dian; Kasih, Demmy; -, Felecia; -, Inggrid
Record and Library Journal Vol 2, No 1 (2016): Januari - Juni
Publisher : Universitas Airlangga

Nowadays, people do not need to go to the library for searching knowledge or information. World has changed. We come to the new generation that so called as digital native generation. Information can be searched through the gadgets on hands which is connected to the internet. Then question comes, is the library still important? What should the library do? It is no wonder that most of the libraries have been decreasing its number of visitors as well as its number of books that out of the shells. This paper describes the characteristics of the digital native, people habit in learning and reading books.Â It also summarizes some discussions among the heads of the three university libraries in Surabaya, i.e, Intitut Teknologi Sepuluh (ITS) Nopember Surabaya, Petra Christian University (PCU), Surabaya Universities (Ubaya). The results of the discussion show that library has to be changed so that they can accommodate the needs of the digital native. It is not only the place for borrowing books, but also the place for doing discussion, watching videos and listening to audios, and of course the online materials must be provided to encounter the decreasing visitors.

Total Productive Maintenance di PT. X Daniel Limantoro; Felecia -
Jurnal Titra Vol 1, No 1 (2013)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (657.37 KB)

PT X merupakan perusahaan yang bergerak di bidang pembuatan keramik. Permasalahan yang sering terjadi adalah kerusakan mesin yang tidak menentu waktu kerusakannya sehingga menyebabkan proses produksi terhenti secara tiba-tiba dan waktu produksi menjadi lebih lama. Sistem maintenance yang dimiliki oleh perusahaan saat ini adalah sistem corrective maintenance.Upaya untuk mempersiapkan penerapan TPM dilakukan dengan menghitung MTBF dan MTTR untuk masing-masing komponen mesin yang mengalami kerusakan. Penghitungan OEE dan analisa six big losses juga dilakukan untuk mengetahui nilai efektivitas mesin yang dimiliki oleh PT X. Hasil analisa six big losses digunakan untuk mengetahui faktor-faktor yang mempengaruhi nilai efektivitas mesin.Kesimpulan yang didapatkan setelah melakukan penghitungan MTBF, MTTR, OEE dan analisa six big losses adalah nilai OEE saat ini 89.9263%. Faktor reduce speed losses merupakan faktor terbesar yang mempengaruhi efektivitas mesin. Efektivitas mesin dapat ditingkatkan dengan memperbaiki faktor-faktor dari six big losses yang mempengaruhi nilai efektivitas serta perbaikan kepada sistem corrective maintenance perusahaan saat ini dan mengusulkan sistem preventive maintenance dan predictive maintenance. Penggunaan predictive maintenance dapat menurunkan frekuensi kerusakan mesin kiln sebesar 79.83%, mesin press sebesar 72.32%, dan mesin glasir sebesar 73.97%.

UPAYA PENINGKATAN PERFORMA PLANT A DI PT X Thea Callista Setiawan; Felecia -
Jurnal Titra Vol 2, No 2 (2014)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (359.589 KB)

Plant A’s performance is measured by KPI (Key Performa Indicator) which some of them didn’t meet the target. The focus improvement is LU-15 which the KPI 2013 shows the uptime’s achievement 22.75 of 40% and CPQI 113 of 112 pts. The average achievement of early 2014 until week 6 for uptime 20.80% of 40% while CPQI 126,75 pts of 110 pts. This shows the performance is still far from target. OPI focus on uptime is brand change, inner liner, and stamp tax while for CPQI are POV(water content) and CTW. Repairs completed through QCC (Quality Control Circle) use PDCA (Plan, Do, Check, Action) concept which leads the team to breakdown the problem, determine the action plan, implementation, evaluation and standardization. Standardization has been implemented for machine, process and focus team improvement. Average achievement after repairs up to week 19 for uptime reach 24.43 of 40%. The achievement has not meets the target because of many variables that influence such as damage of the machine, but overall the performance had increased. Average CPQI reach 116 of 110 pts where in the last 5 weeks has been decreased and reach the target, but still need consistency to stabilization performance.

Usulan Penurunan Tingkat Kecacatan Produk Sosis Ayam di PT Charoen Pokphand Indonesia Samuel -; Felecia -
Jurnal Titra Vol 3, No 1 (2015)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (408.169 KB)

PT Charoen Pokphand Indonesia is one of Indonesia’s producer of poultry feed, day old chicks and processed chicken. This research is conducted in sausages plant in Surabaya which produced chicken and beef sausages. Chicken sausages have several types of defects like wrinkled (0,9%), fungus (0,04%), and reject cooking (0,34%). The purpose of this research is to find the defect’s root cause and to propose solutions to reduce chicken sausages defects.DMAIC is used as a method to find problem’s root cause and solution in this research along with interview and direct field observation. It is found that defects caused by operator lack of focus during operation, no quality inspection for PVDC plastic, machine breakdown and no standardized working procedure.This research proposed the company to give morning briefing for operators, quality inspection by quality control department for PVDC plastic, designing tray separator, designing checklist form, downtime form, and work instruction. It is expected to reduced chicken sausages defects up to 1,28%.

Pembuatan Dokumentasi HACCP di Plant-1 PT X Maria Yohana Megawati; Felecia -
Jurnal Titra Vol 1, No 2 (2013)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (282.689 KB)

PT X is one of coconut oil company in Indonesia with copra and Crude Palm Oil (CPO) as raw material. PT X has ISO 9001:2008 certification, and now they want to get ISO 22000:2005 certification to gain customer satisfaction. One of ISO 22000:2005 requirement is certification of HACCP. This thesis intended to prepare HACCP at Plant-1 PT X. This preparation have been done until making of HACCP team, product description, making of flowchart, making of principle one until principle seven of HACCP. Result of this thesis has been done until making follow up steps for every Critical Control Point (CCP). Problems that occurs in CCP are metal, oil and grease may contaminate coconut oil. Suggestions that given for these problems are oil and grease must be changed into food grade oil and grease and application of metal trap. Result of implementation that has been done is given metal trap for every section that highly risk contaminated by metal.

Evaluasi Pasca Implementasi SAP pada Departemen PPIC PT. X Jessica Sugianto; Felecia -
Jurnal Titra Vol 1, No 2 (2013)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (199.959 KB)

PT. X is a manufacturing company with flexible film packaging products. The company’s SAP system application was about to change intonthe new SAP system. The Evaluation of the SAP’s new post-implementation can be done in 2 ways. The first way is to describe the new SAP system’s adventages, compared to the old SAP system. The oter way is to do an evaluation of the potential problems and providing solutions to the problems. The results of the evaluation stated that there are 2 new SAP adventages, compared to the old SAP. The first adventage is thatvthe new SAP system can separate the plastic waste generated by the type of waste. The other adventage is that the system of naming batches on the new SAP was more effective. The results of subsequent evaluation stating that there are 2 new SAP post implementation problems. The first problem is an error in the SO making process. The solutions that can be given is to seek approval from the marketing for the SO to be processed, as well as changing the SO data input system. The other problem is the staff that aren’t executed the system of export orders. The solution that given is make the new approval system for the eksport layout images.

Studi Kelayakan Bisnis Pelumas Food Grade Petro-Canada untuk Industri Makanan dan Minuman di Jawa Timur Jeffri Sucipto Utomo; Felecia -
Jurnal Titra Vol 2, No 2 (2014)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (442.094 KB)

This research is conducted to analize business feasibility study of food grade lubricants Petro-Canada brand for food and beverages industries in East Java. The number of medium large scale industries in Indonesia which engaged in processing food and beverage is 5.865 in 2012. East Java has 1906 food and beverage industries that needs 605.270 liters lubricats per year. Business feasibility study is analyzed using market analysis, technical analysis, legal analysis, and financial analysis. Data collection technique for market analysis is using questionnaire which was distributed to 25 food and beverages processing industries located in Surabaya and surrounding areas. Technical analysis showed the working system, business location, and company management. It is also supported by legality aspect of the law in business activities. The business requires initial investment of Rp 5.558.855.000, and will reach break even point in 21 months with 3 years internal rate of return up to 67%. Based on these analysis Petro-Canada food grad lubricants for food and beverage industries in East Java is feasible.

Pengembangan Matriks Kompetensi Berdasarkan Sistem Three on Three di PT E-T-A Indonesia Vicky Yuwono; Felecia -
Jurnal Titra Vol 1, No 2 (2013)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (534.594 KB)

The jobs of HRD at PT E-T-A are recruitment, people development, and layoff. PT E-T-A is currently using contract system for production operator. Contract for employement that expired can be extended or not depend on company policy, or company can open recruitment for employee depends on their demand. Solution is needed for production that must go on eventhough human resources changed. This solution is called competency matrix three on three, which one person masters minimal three competencies and one competency is mastered by three persons. The result of the evaluation still hasn’t met the requirement of three on three competency matrix, so that there is a few job that can’t be changed by the other employee. The causes of this problem are both operators and staff have not mastered certain competency, numbers of staff are limited, and contract expired. The solutions are given to change the staff competency matrix by blocking on competency which is not their own responsibility, make form competency development plan, job rotation schedule, and change how to fill in competency matrix from manually to automatically.

PENINGKATAN RENDEMEN BARECORE DI PT ANUGERAH TRISTAR INTERNASIONAL Michael Raymond; Felecia -
Jurnal Titra Vol 2, No 1 (2014)
Publisher : Jurnal Titra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (216.536 KB)

PT Anugerah Tristar Internasional is a woodworking company which produces barecore. Barecore is a wooden board that made from small pieces of wood that glued together, barecore is used for the central part of the plywood. The company’s current problem is that the average yield rate only 46.24%. From the current condition there are few problems. One of them is variability in the raw material size and quality. Another problem is the high rate of waste produced up to 53.76% and this waste is never recycled. The proposed improvement is to re-use the waste to produce new barecore. This will require extra processing and sorting of the waste. The improvement increase the average yield rate up to 5.72% for the company and profit Rp. 3.053.500,00/m3 barecore.

Title

Found 23 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 23 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 23 Documents
Search