Article Per Year (5 Year)
p-Index From 2021 - 2026
2.151
P-Index
This Author published in this journals
All Journal International Journal of Electrical and Computer Engineering TELKOMNIKA (Telecommunication Computing Electronics and Control) Indonesian Journal of Electrical Engineering and Computer Science
Mohammed Fattah
Moulay Ismail University
Computer Science & IT Electrical & Electronics Engineering

Published : 9 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 9 Documents
Search

 1 
Automatic target detection and localization using ultra-wideband radar Dounia Daghouj; Marwa Abdellaoui; Mohammed Fattah; Said Mazer; Youness Balboul; Moulhime El Bekkali
International Journal of Electrical and Computer Engineering (IJECE) Vol 12, No 2: April 2022
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v12i2.pp1695-1702

Abstract

The pulse ultra-wide band (UWB) radar consists of switching of energy of very short duration in an ultra-broadband emission chain, and the UWB signal emitted is an ultrashort pulse, of the order of nanoseconds, without a carrier. These systems can indicate the presence and distances of a distant object, call a target, and determine its size, shape, speed, and trajectory. In this paper, we present a UWB radar system allowing the detection of the presence of a target and its localization in a road environment based on the principle of correlation of the reflected signal with the reference and the determination of its correlation peak.
Design of a microstrip antenna patch with a rectangular slot for 5G applications operating at 28 GHz Salah-Eddine Didi; Imane Halkhams; Mohammed Fattah; Younes Balboul; Said Mazer; Moulhime El Bekkali
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 20, No 3: June 2022
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v20i3.23159

Abstract

In this paper, we present a study and design of a rectangular-shaped microstrip patch antenna with a rectangular shaped slot at the operating frequency is 28GHz, for fifth generation (5G) wireless applications, using the microstrip line technique for feeding. The objective of this slot is to contribute to the improvement of antenna performance. This antenna is built on a Roger RT duroid 5880 type substrate having a relative permittivity equal to 2.2, a height of h = 0.5 mm, and a loss tangent of 0.0009. The compact size of this antenna is 4.2 mm × 3.3 mm × 0.5 mm. The simulations of this antenna were performed using high-frequency structure simulator (HFSS) and computer simulation technology (CST) software whose main purpose is to confirm the results obtained for this proposed antenna. The results obtained during these simulations are as follows: resonant frequency of 27.97 GHz and reflection coefficient ) of -20.95 dB, bandwidth of 1.06 GHz, a gain of 7.5 dB, radiated power of 29.9 dBm, and efficiency of 99.83%. These results obtained by this proposed antenna are better than those obtained from already existing antennas that are published in current scientific journals. Consequently, this antenna is likely to satisfy the needs for 5G wireless communication applications.
Energy consumption study of channel access modes and modulation schemes of the 2.4 GHz narrowband IEEE 802.15.6 Marwa Boumaiz; Mohammed El Ghazi; Mohammed Fattah; Anas Bouayad; Moulhime El Bekkali
Indonesian Journal of Electrical Engineering and Computer Science Vol 22, No 3: June 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijeecs.v22.i3.pp1505-1512

Abstract

Energy efficiency is an important challenge for wireless body area networks. Therefore, choosing the channel access modes and modulation schemes that guarantee lower energy consumption is necessary to increase the network lifetime, especially in wireless body area network (WBAN) medical applications. The purpose of this paper is to analyze the network energy consumption in on-body medical applications (which are classified as low data rate, medium data rate, and high data rate applications) for two channel access mechanisms: random and scheduled access modes, and two modulation schemes: differential quadrature phase shift keying (DQPSK) and differential binary phase shift keying (DBPSK), which are supported by the 2.4 GHz band of the Institute of Electrical and Electronics Engineers (IEEE) 802.15.6 standard. The considered on-body area network (BAN) of the study supports two communication scenarios: the line-of-sight transmission and the non-line-of-sight communications, referenced as CM3A and CM3B path loss models respectively. Simulation results have demonstrated that the scheduled access mode based on time-division multiple access (TDMA), and DQPSK are the optimal choices to be made at the media access control (MAC) and physical layer levels respectively, in terms of energy efficiency, in low, medium, and high data rate on-body WBAN applications.
New microstrip patch antenna array design at 28 GHz millimeter-wave for fifth-generation application Salah-Eddine Didi; Imane Halkhams; Abdelhafid Es-Saqy; Mohammed Fattah; Younes Balboul; Said Mazer; Moulhime El Bekkali
International Journal of Electrical and Computer Engineering (IJECE) Vol 13, No 4: August 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v13i4.pp4184-4193

Abstract

This paper presents a study and an array design consisting of two microstrip patch antennas connected in series in a 2×1 form. This antenna provides better performance for the fifth-generation (5G) wireless communication system. The microstrip line feeding technique realizes the design of this antenna. This feed offers the best bandwidth, is easy to model, and has low spurious radiation. The distance between the feed line and the patch can adapt to the antenna’s impedance. In addition, the antenna array proposed in this paper is designed and simulated using the high frequency structure simulator (HFSS) simulation software at the operating frequency of 28 GHz for the 5G band. The support material used is Rogers RT/duroid® 5880, with relative permittivity of 2.2, a thickness of h=0.5 mm, and a loss tangent of 0.0009. The simulation results obtained in this research paper are as: reflection coefficient: -35.91 dB, standing wave ratio (SWR): 1.032, bandwidth: 1.43 GHz, gain: 9.42 dB, directivity: 9.47 dB, radiated power: 29.94 dBm, accepted the power: 29.99 dBm, radiation efficiency: 29.95, efficiency: 99.83%. This proposed antenna array has achieved better performance than other antenna arrays recently published in scientific journals regarding bandwidth, beam gain, reflection coefficient, SWR, radiated power, accepted power, and efficiency. Therefore, this antenna array will likely become an important competitor for many uses within the 5G wireless applications.
High rejection self-oscillating up-conversion mixer for fifth-generation communications Abdelhafid Es-saqy; Maryam Abata; Mohammed Fattah; Said Mazer; Mahmoud Mehdi; Moulhime El Bekkali; Catherine Algani
International Journal of Electrical and Computer Engineering (IJECE) Vol 13, No 5: October 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijece.v13i5.pp4979-4986

Abstract

This paper presents the design of a pseudomorphic high electron mobility transistor (pHEMT) self-oscillating mixer (SOM) for millimeter wave wireless communication systems. The 180° out-of-phase technique is chosen to both improve the desired lower sideband (LSB) signal and to achieve a satisfactory rejection of the unwanted signals (LO, USB and IF). This SOM is designed on the PH15 process of UMS foundry which is based on 0.15 µm GaAs pHEMT. The signal is up-converted from 2 GHz-IF frequency to 26 GHz-LSB frequency, using an autogenerated 28 GHz-LO signal. Simulations were performed using the advanced design system (ADS) workflow. They show 6.4 dB conversion gain and a signal rejection rate of 29.7 dB for the unwanted USB signal. the chip size is 3.6 mm2.
Design of a microstrip antenna patch with a rectangular slot for 5G applications operating at 28 GHz Salah-Eddine Didi; Imane Halkhams; Mohammed Fattah; Younes Balboul; Said Mazer; Moulhime El Bekkali
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 20, No 3: June 2022
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v20i3.23159

Abstract

In this paper, we present a study and design of a rectangular-shaped microstrip patch antenna with a rectangular shaped slot at the operating frequency is 28GHz, for fifth generation (5G) wireless applications, using the microstrip line technique for feeding. The objective of this slot is to contribute to the improvement of antenna performance. This antenna is built on a Roger RT duroid 5880 type substrate having a relative permittivity equal to 2.2, a height of h = 0.5 mm, and a loss tangent of 0.0009. The compact size of this antenna is 4.2 mm × 3.3 mm × 0.5 mm. The simulations of this antenna were performed using high-frequency structure simulator (HFSS) and computer simulation technology (CST) software whose main purpose is to confirm the results obtained for this proposed antenna. The results obtained during these simulations are as follows: resonant frequency of 27.97 GHz and reflection coefficient ) of -20.95 dB, bandwidth of 1.06 GHz, a gain of 7.5 dB, radiated power of 29.9 dBm, and efficiency of 99.83%. These results obtained by this proposed antenna are better than those obtained from already existing antennas that are published in current scientific journals. Consequently, this antenna is likely to satisfy the needs for 5G wireless communication applications.
Gilbert cell down-conversion mixer for THz wireless communication with passive baluns Abdeladim El Krouk; Abdelhafid Es-saqy; Mohammed Fattah; Said Mazer; Mahmoud Mehdi; Moulhime El Bekkali; Catherine Algani
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 22, No 6: December 2024
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v22i6.25682

Abstract

This article presents the design of an active down-conversion mixer for the superheterodyne receiver system for 6G wireless communications. This mixer is developed based on the Gilbert cell in the terahertz frequency band, using the PH15 transistor from United Monolithic Semiconductors (UMS) Foundry in monolithic microwave integrated circuit (MMIC) technology. We used the charge injection method to increase our mixer’s conversion gain. In addition, we integrated a buffer stage at the mixer outputs to facilitate impedance matching and improve linearity. The power dividers used in this chapter are based on transmission lines from Agilent's advanced design system (ADS) tool, connected to the input and output ports of the circuit. The proposed architecture offers a high conversion gain of 15.2 dB, with a low local oscillator (LO) power of 0 dBm, a low double sideband (DSB) noise figure (NF) of around 7.1 dB, a 1\ dB compression point of -16 dBm, and good radio frequency (RF)-LO port isolation of 63.2 dB, at a RF of 0.14 THz.
Design of a 2×2 dual band 28/38 GHz MIMO antenna in millimeter band for 5G Salah-Eddine Didi; Imane Halkhams; Mohammed Fattah; Younes Balboul; Said Mazer; Moulhime El Bekkali
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 22, No 2: April 2024
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v22i2.25268

Abstract

In this paper, we design and simulate a 28/38 GHz dual-band multiple-input multiple-output (MIMO) patch antenna array that operates in the FR2 frequency band (28 GHz and 38 GHz). This antenna array comprises four similar patch antennas with a rectangular “L minus two slots” shape. In addition, it applies to 5G electronic components such as a smartphone. We used high-frequency structure simulator (HFSS) software to perform the design and simulation for this antenna. In addition, this proposed antenna array provides better performance, such as; bandwidth around 28 GHz is equal to 0.69 GHz and 38 GHz is equal to 0.86 GHz, equal gains 5. 9 dB at 28 GHz and 9 dB at 38 GHz, directivities are 6.3 dB at 28 GHz and 9.4 dB at 38 GHz, the efficiency of 95.38% at 28 GHz, and efficiency of 96.53% at 38 GHz.
Resource placement strategy optimization for IoT oriented monitoring application Saad-Eddine Chafi; Younes Balboul; Mohammed Fattah; Said Mazer; Moulhime El Bekkali; Benaissa Bernoussi
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 20, No 4: August 2022
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v20i4.23762

Abstract

Cloud computing and the low power wide area network (LPWAN) network represent the key infrastructures for developing intelligent solutions based on the internet of things (IoT). However, the diversity of use cases and deployment scenarios of IoT in the different domains makes optimizing IoT-based cloud solutions a major challenge. The cloud solution’s cost increases with the increase in central processing unit (CPU) resources and energy consumption. The optimal use of edge material resources in industrial solutions will reduce the consumption of resources and thus optimize cloud infrastructure costs in terms of resources and energy consumption. The article presents the network and application architecture of an IoT monitoring solution based on cloud services. Then, we study the integration of IoT services based on application placement strategies on the fog cloud compared to the traditional centralized cloud strategy. Simulations evaluate the scenarios with the iFogSim simulator and the analyzed results compare the traditional strategy with the cloud-fog. The results show that cost and energy consumption in the cloud can be significantly reduced by processing the application at the end devices level with respect to the possible limit of CPU processing power for each IoT end device. Latency and network usage respect quality of service constraints in cloud-fog placement for this type of monitoring-oriented IoT application.
Co-Authors Abdeladim El Krouk Abdelhafid Es-saqy Anas Bouayad Benaissa Bernoussi Catherine Algani Catherine Algani Dounia Daghouj Imane Halkhams Imane Halkhams Imane Halkhams Mahmoud Mehdi Mahmoud Mehdi Marwa Abdellaoui Marwa Boumaiz Maryam Abata Mohammed El Ghazi Moulhime El Bekkali Moulhime El Bekkali Saad-Eddine Chafi Said Mazer Salah-Eddine Didi Younes Balboul Youness Balboul