Article Per Year (5 Year)
p-Index From 2021 - 2026
1.126
P-Index
This Author published in this journals
All Journal METANA Bangunan Jurnal Proyek Teknik Sipil Jurnal Pengabdian Vokasi Jurnal Sipil dan Arsitektur
Setiabudi Bambang
Diponegoro University
Civil Engineering, Building, Construction & Architecture Computer Science & IT Engineering Languange, Linguistic, Communication & Media Law, Crime, Criminology & Criminal Justice

Published : 11 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 11 Documents
Search

 1   2 
PENCEGAHAN BANJIR, DAN PENURUNAN MUKA AIR TANAH DENGAN SUMUR RESAPAN Setiabudi, Bambang
METANA Vol 6, No 01 (2009): April 2009
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4396.6 KB) | DOI: 10.14710/metana.v6i01.1796

Abstract

Abstract   Bambang Setiabudi, in paper floods and to discharge of ground water many created in much housing district. That case to appoint often to created every year at rainy season and dry season Expedient to doing is by absorbtion well. Absorbtion ,well is water conservation technology to resemble well with to be certain depth for to catch of water.
KAJIAN PERENCANAAN PEMBANGUNAN PASAR SAYANGAN SALATIGA Asri Nurdiana; Bambang Setiabudi; Sutanto Sutanto
Jurnal Proyek Teknik Sipil Vol 5, No 1 (2022): March
Publisher : Civil Infrastructure Engineering and Architectural Design

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/potensi.2022.14618

Abstract

Pasar Sayangan adalah salah satu pasar tradisional berskala kecil yang terletak di Jl. Pattimura, Kecamatan Sidorejo Salatiga. Kondisi kios sudah tidak layak dipergunakan dan kondisi los pedagang perlu dilakukan penataan. Sarana pendukung seperti tempat sampah, sarana air bersih dan area parkir sangat kurang. Berdasarkan kondisi tersebut, maka Pasar Sayangan perlu dilakukan Revitalisasi yang bertujuan untuk meningkatkan kualitas pelayanan kepada pedagang dan pengunjung serta menciptakan lingkungan pasar yang bersih, sehat, aman dan nyaman. Bangunan Pasar Sayangan direncanakan 2 (dua) lantai. Lantai Satu terdiri Kios, Los, Kantor Pengelola, Gudang, MCK, Tempat Parkir dan Tempat Sampah. Sedangkan Lantai Dua terdiri Kios Makanan, Area Pengunjung, Kantor Pengelola, Mushola dan MCK
PENINGKATAN KUAT TEKAN PAVING BLOCK DENGAN ALAT CETAK MEKANIS Fardzanela Suwarto; Shifa Fauziyah; Bambang Setiabudi; Moh Nur Sholeh
Jurnal Pengabdian Vokasi Vol 1, No 3 (2020): Juni 2020
Publisher : Sekolah Vokasi Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (229.891 KB)

Abstract

Pesatnya Pesatnya perkembangan perindustrian di bidang transportasi dantatanan pertamanan kota, turut mempengaruhi industri paving block. Salah satu home industri yang berkembang dalam bidang produksi paving block adalah UD. Putra Mandiri dan UD Abadi jaya yang bertempat di jalan Prof. Suharso No. 27 Semarang. Usaha paving block ini dilakukan secara bersamaan pengelolaannya dengan kegiatan usaha lainnya seperti batako. Tingginya permintaan konsumen terhadap paving block tidak diimbangi dengan ketersediaan kualitas yang memadai baik dari segi kekuatan, umur pakai, dan durability paving. Pada usaha ini masih banyak ditemukan beberapa produk yang retak dan pecah, hal ini mungkin disebabkan oleh proses pencetakan yang masih menggunakan proses manual dengan tenaga manusia. Proses pencetakan manual ini menyebabkan ketidak konsistensian dalam pemadatan cetakan paving block sehingga seringkali hasil produksi tidak dapat dipasarkan karena terdapat banyak produk yang cacat. Sehingga tujuan dari pengabdian ini adalah untuk melakukan pemeriksaan uji kuat tekan produk Paving Block yang dihasilkan mitra dengan proses pencetakan manual, serta membandingkan kuat tekan produk tersebut dengan Paving Block hasil pencetakan dengan proses mekanis.
PENDAMPINGAN INVENTARISASI KERUSAKAN SALURAN IRIGASI DAN USULAN PERBAIKAN KONSTRUKSI DI DESA KANGKUNG-DEMAK riza susanti; Budhi Dharmo; Bambang Setiabudi
Jurnal Pengabdian Vokasi Vol 1, No 3 (2020): Juni 2020
Publisher : Sekolah Vokasi Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (658.166 KB)

Abstract

Irigasi mempunyai peran yang sangat penting dalam upaya peningkatan produktivitas pertanian suatu daerah. Tetapi, di lapangan banyak saluran irigasi yang memiliki tingkat kerusakan tinggi termasuk di Kabupaten Demak, di mana rata-rata saluran irigasi termasuk dalam kategori rusak sedang dengan nilai tingkat kerusakan 25, 47%. Cukup tingginya angka kerusakan ini menjadikan perlu dilakukan inventarisasi lebih detail tentang kondisi saluran irigasi sehingga dapat dilakukan usulan perbaikan konstruksi sehingga dalam pelaksanaan dapat menjadi lebih optimal. Pengabdian ini diselenggarakan di Desa Kangkung Demak Jawa Tengah. Kegiatan ini merupakan bagian dari kegiatan Pengabdian Kepada Masyarakat yang diselenggarakan oleh Sekolah Vokasi Universitas Diponegoro. Hasil dari kegiatan pengabdian ini nantinya dapat dijadikan dasar perbaikan perencanaan saluran irigasi yang ada di Desa Kangkung-Demak.
Model 5D Gedung Dekanat dan Perkuliahan Fakultas Kesehatan Masyarakat, Universitas Diponegoro Firdaus, Muhammad Ar Rayyan; Asalina, Rahma Uyun; Nurdiana, Asri; Setiabudi, Bambang
Jurnal Sipil dan Arsitektur Vol 1, No 3 (2023): Desember
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/pilars.1.3.2023.45-59

Abstract

Redesign is the critical point of the construction process which aims to provide technical specification requirements that will be used at the project later. In project planning, more time and accuracy are needed to obtain the required output. Therefore, it is necessary to use BIM or Building Information Modeling software to simplify, speed up and minimize errors due to human error. This Project was made a redesign the Dean's Building and Lecture project of the Faculty of Public Health, Diponegoro University using the BIM or Building Information Modeling application which aims to streamline structural, planning work, financing estimation, and scheduling processes. The method used is a literature study with the main data of design drawing and others data from the construction project of the Dean Building and Lectures of the Faculty of Public Health, Diponegoro University. The preparation of this Project goes through 3 stages. The first stage is to redesign the FKM Building project using Autodes Revit, the second stage is analyzing the structure with SAP 2000 and Ms Excel applications then the third stage is replanning cost estimation and scheduling using Ms Excel and Ms Project. The result of this Final Project is to obtain new best drawings, material specifications, cost estimation and scheduling.
Penerapan Building Information Modeling (BIM) dalam Perencanaan Rumah Susun Kementerian Sosial BBRSPDF Kota Surakarta 6 Lantai Wibowo, Aditya; Asha, Safia Nur; Nurdiana, Asri; Setiabudi, Bambang
Jurnal Sipil dan Arsitektur Vol 1, No 3 (2023): Desember
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/pilars.1.3.2023.31-44

Abstract

Construction planning and management is carried out as an attempts to find out various aspects that will be use in facilitating the construction, so it is following the applicable requirements, building functions, and economy. In construction projects, problems are often found at the planning stage or during construction, such as clashes between design elements or between schedules which can cause delays in project construction, large amounts of waste generated after construction, cost overruns during construction, and other problems caused by a lack of accuracy and poor coordination that can disrupt the productivity of construction projects. As technology develops, Building Information Modeling (BIM) is use as a solution to overcome various problems in the construction sector with a system that can collect and manage important data in the construction planning process that is integrated into accurate 3D modeling. In this final project, Building Information Modeling (BIM) will be used to plan the 6-floor Flats of the Ministry of Social Affairs BBRSPDF Surakarta City. Outputs be generated can be in the form of superstructure and substructure plans, namely the design of foundation structures, columns, beams, and plates, 2D Detail Engineering Design (DED), 3D modeling, and construction management plans in the form of Budget Plans, and scheduling.
Perancanaan Jembatan Beton Prategang RSUD Temanggung dengan Berbasis Building Information Modeling (BIM) 3D, 4D, dan 5D Anandita, Dianya Puan; Nurdiana, Asri Nurdiana; Setiabudi, Bambang
Jurnal Sipil dan Arsitektur Vol 1, No 3 (2023): Desember
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/pilars.1.3.2023.60-75

Abstract

Building Information Modeling (BIM) technological innovations can assist in designing construction designs to be integrated with each other, so that the process can be more effective and efficient. This Building Information Modeling (BIM) technology can be applied to various construction works, including road and bridge construction work. In this study the authors will plan the construction work of a prestressed concrete bridge at Temanggung Hospital which includes bridge geometric planning, structural loading and reinforcement calculations, 3D modeling and calculation of concrete volume and reinforcement using Autodesk Revit, as well as designing a cost budget and time schedule using Microsoft Project. From the analysis. Based on the results of the analysis, obtained a 17,453-meter-long Full Circle bend plan with a 4% incline, the elevation of the bridge is 14,470 meters from the riverbed, the design of the bridge at the Temanggung Hospital is safe against work loads, the total cost needed in the construction of the Temanggung Hospital Bridge is Rp. 7,875,323,851, with a duration of work of 5 months starting from 1 August 2023 to 9 December 2023.
Pendampingan Redesain Saluran Irigasi di Desa Kangkung, Kabupaten Demak Fauziyah, Shifa; Setiabudi, Bambang
Jurnal Pengabdian Vokasi Vol 3, No 2 (2023): November 2023
Publisher : Sekolah Vokasi Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/jpv.2023.20789

Abstract

Widening irrigation canals is important as part of the Indonesian government's efforts to increase crop yields, reduce poverty, and achieve food independence. This community service program is very much needed by the people of Kangkung Village, Demak Regency, due to the uncertain climatic conditions and the lack of adequate irrigation networks used by the community to irrigate the farmers' fields. This actual condition is the background for selecting the object of community service research to study, analyze and formulate the right irrigation channel model to help irrigate of plantation and agricultural lands for the Kangkung village community and its surroundings in order to increase the production of agricultural and plantation products.
SISTEM DETEKTOR KERETAKAN SUATU BANGUNAN AKIBAT GEMPA DENGAN MENGGUNAKAN VIBRATION SENSOR Fadhila, Khalvin Ilham; Rofiq, Subekti Ainur; Setiabudi, Bambang; Susanti, Riza
BANGUNAN Vol 28, No 2 (2023): BANGUNAN EDISI OKTOBER
Publisher : Universitas Negeri Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17977/um071v28i22023p11-24

Abstract

Indonesia merupakan negara yang sangat rawan terhadap gempa bumi karena posisinya yang terletak pada dua samudera, tiga lempeng dunia, serta ring of fire. Di Indonesia saat ini sistem peringatan dini yaitu seismograf hanya mampu dipasang di tempat tertentu seperti pegunungan dan pantai. Oleh karena itu, persyaratan tersebut membuat sistem pendeteksi gempa bumi tidak dapat digunakan di daerah kota besar sehingga perlu adanya inovasi berupa sistem detektor keretakan bangunan akibat gempa bumi dengan menggunakan vibration sensor. Tujuan dari penelitian ini adalah untuk mengetahui penerapan vibration sensor serta pengaruhnya dalam meminimalisir korban jiwa dan mengetahui kerusakan yang terjadi. Untuk membuat sistem detektor keretakan bangunan menggunakan vibration sensor melalui beberapa tahap yaitu (1) survey dan analisa kebutuhan (2) pembuatan alat (3) pengujian. Mekanisme sistem kerja alat ini adalah ketika data masuk akan diuji dua sistem dengan waktu yang telah ditetapkan pada software IDE Arduino dimulai dari prototipe berupa dinding yang dipukul hingga terjadi retakan. Pada sistem pertama getaran yang dihasilkan akan ditangkap dan diolah  oleh NodeMCU ESP8266 sehingga akan menghidupkan buzzer dan LED sebagai indikator kerusakan. Pada sistem kedua getaran akan ditangkap NodeMCU ESP8266 dan ditransmisikan menuju PC dengan platform ThingSpeak berupa nilai getaran secara visual. Dari hasil penelitian ini diharapkan sistem detektor keretakan bangunan akibat gempa bumi dengan menggunakan vibration sensor mampu berjalan dengan baik sesuai yang dirancang dan dapat diaplikasikan di kota-kota besar untuk meminimalisir korban akibat bencana dan mengetahui besaran nilai getaran yang terjadi.Kata kunci: vibration sensor, gempa bumi, NodeMCU ESP8266
APLIKASI MANAJEMEN RISIKO PADA PROYEK JALAN TOL SEMARANG-SOLO RUAS BAWEN-SOLO Nurdiana, Asri; Setiabudi, Bambang
Jurnal Proyek Teknik Sipil Vol 1, No 1 (2018): September
Publisher : Civil Infrastructure Engineering and Architectural Design

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (853.248 KB) | DOI: 10.14710/potensi.2018.3488

Abstract

At construction project there must be risks. Risk is a consequence of the uncertainty conditions. In construction projects, the risk can’t be predicted as well because there are a lot of uncertainty to predict problems (Nurdiana, 2015). The aims of this paper are to identify the risk from contractor persepction; to analyze the risk from contractor persepction; and to assign the risk respon from contractor persepction at project of Semarang-Solo Highway (segment Bawen-Solo).The primary data were the identification of risk and the assessment of risk (probability and impact of risk) that obtained by interview and questionnaire method. The secondary data were the project document and the previous research. Data analysis was done by Risk Breakdown Structure method.The identification of risks in the Bawen-Solo Highway project is divided into 4 categories, that are technical risk, procurement risk, contractual risk, and managerial risk. The risk identification is 11 risks which are in the risk category above. Based on the risk analysis that has been done, the biggest risk is contractual risk, which is the contract termination due to project delay. From the value of risk that has been analyzed, the majority of risk is at a low risk level (86%), then moderate risk (14%). Based on an analysis of the risk response, 86% of the risk response is accepted, and 14% of the risk response is mitigation.
Co-Authors Aditya Wibowo, Aditya Amalia, Nurul Afifah Anandita, Dianya Puan Asalina, Rahma Uyun Asha, Safia Nur Asri Nurdiana, Asri Budhi Dharmo Fadhila, Khalvin Ilham Fardzanela Suwarto Firdaus, Muhammad Ar Rayyan Moh Nur Sholeh Nurdiana, Asri Nurdiana Riza Susanti Rofiq, Subekti Ainur Shifa Fauziyah susanti, riza Sutanto Sutanto Widyasari, Sheny