Heriyanto Syafutra
Departemen Fisika, Fakultas Matematikan Dan Ilmu Pengetahuan Alam, Institut Pertanian Bogor, Kampus IPB Darmaga Bogor 16680

Published : 12 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 12 Documents
Search

Produktivitas Amino Acid Fish Aggregation pada Alat Tangkap Bagan Apung di Perairan Palabuhanratu, Sukabumi Roza Yusfiandayani; Bambang Riyanto; Mohamad Rafi; . Heriyanto
Jurnal Ilmu Pertanian Indonesia Vol. 24 No. 2 (2019): Jurnal Ilmu Pertanian Indonesia
Publisher : Institut Pertanian Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (541.427 KB) | DOI: 10.18343/jipi.24.2.135

Abstract

Fish has two chemical sensory/receptor systems that smell (olfactory) and taste (gustatory) odor that adapt to the specific substance of the environment. In general, olfactory is similar to nasal organs for human nostrils. The olfactory receptors detect chemical stimuli in the form of electrical signals. Based on the ability of fish that can respond to chemical stimuli through the sense of smell, a substance can be used to attract the attention of fish. In response to this reality, AFA (Amino Acid Fish Aggregation) can be developed as a fish collecting tool to attract fish bu using amino acid preparation that works though the sense of smell and taste of fish. The objectives of this study were to design and produce a prototype of Amino Acid Fish Aggregation (AFA), to determine the productivity of catches of raft lift net by using AFA, and to calculate the length of the weight of the catch using AFA. The data used were catch data with weights and lengths of fish catch by raft lift net using AFA. The results showed that the AFA prototype which had a size of p x l x t : 35 x 22 x 15 cm and the highest catches was found at 18.00-00.00 WIB by using AFA with raft lift net. The catches using AFA in Palabuhanratu waters amounted to 5 types of fish, namely stolephorus sp., sardinella sp., rastrelliger kanagurta, euthynnus affinis, trichiurus sp., and positive allometrics were found in rastrelliger kanagurta and anchovy, but negative allometrics were found in euthynnus affinis, sardinella sp., and trichiurus sp.
PEMBUATAN PROTOTIPE SISTEM KEAMANAN LABORATORIUM BERBASIS ARDUINO MEGA Gagat Mughni Pradipta; Nida Nabilah; Hannif Izzatul Islam; Dendy Handy Saputra; Sofyan Said; Ade Kurniawan; Heriyanto Syafutra; Shelvie Nidya Neiman; Irzaman Irzaman
PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) Vol 5 (2016): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2016
Publisher : Program Studi Pendidikan Fisika dan Program Studi Fisika Universitas Negeri Jakarta, LPPM Universitas Negeri Jakarta, HFI Jakarta, HFI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (858.481 KB) | DOI: 10.21009/0305020107

Abstract

We has been successfully creating a laboratory security system prototype based on Arduino Mega. This device assisted with PIR sensor (passive infrared) and RFID (Radio Frequency Identifier). In experiments carried out study the sensitivity of the PIR sensor at a distance of 0 meters, 0.5 meters, 1 meters, 1.5 meters, 2 meters, 2.5 meters, 3 meters, 3.5 meters and 4 meters then at an angle of 00, 300, 450, and 600 with the source of motion is the human’s body movement. In this study data showed that at a distance of 2 .5 meters at an angle of 60 degrees PIR was not able to catch the source of human movement. At a distance of 2.5 meters below and 60 degrees could not catch the source of human movement. Otherwise at a distance more than 2.5 meters human movement can not be captured by the PIR sensor. At the RFID trial data obtained that the card can be read by an RFID reader within a maximum of 3 cm, with no barrier between the RFID reader and the card. The data condition also occurs when a thick paper is placed between the card and RFID reader as a barrier. While at the moment given the barrier is made from plastic the card can be read at a distance of 1 cm maximum. Keywords: Arduino, ATmega2560, Passive Infra Red (PIR), Radio Frequency Identifier (RFID), Security system.
PEMBUATAN PROTOTIPE LAMPU OTOMATIS UNTUK PENGHEMATAN ENERGI BERBASIS ARDUINO UNO DI DEPARTEMEN FISIKA FMIPA IPB Nida Nabilah; Hannif Izzatul Islam; Dendy Handy Saputra; Gagat Mughni Pradipta; Sofyan Said; Ade Kurniawan; Heriyanto Syafutra
PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) Vol 5 (2016): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2016
Publisher : Program Studi Pendidikan Fisika dan Program Studi Fisika Universitas Negeri Jakarta, LPPM Universitas Negeri Jakarta, HFI Jakarta, HFI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (707.283 KB) | DOI: 10.21009/0305020115

Abstract

Prototipe automation lamp for saving energy has been successfully creating based on arduino uno. It is assited by PIR (passive infrared) sensor and RTC (real time clock) module. For proving sensitivity PIR, performed an experiment use a distance that is 0 meter, 0.5 meter, 1 meter, 1.5 meter, 2 meter, 2.5 meter, and 3 meter and an angle of 0 degree, 30 degree, 45 degree, and 60 degree with the source motion is the human movement. In this experiment is showed that in the distance of 2.5 meter and angle 60 degree PIR sensor can’t reach the source motion. Real time clock is used to set the active sensor PIR before detected source motion. It make more effective so there is no reduce of energy, because time of consuming lamp which active during 1x24 hours. Keywords: Arduino Uno, Automation Lamp, PIR Sensor, RTC, Saving Energy
UJI KONDUKTIVITAS TERMAL PADA DAUN BAYAM DENGAN MENGGUNAKAN THERMAL CONDUCTIVITY APPARATUS Firmansyah Firmansyah; Heriyanto Syafutra; Sidikrubadi Sidikrubadi; Irzaman Irzaman
PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) Vol 6 (2017): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2017
Publisher : Program Studi Pendidikan Fisika dan Program Studi Fisika Universitas Negeri Jakarta, LPPM Universitas Negeri Jakarta, HFI Jakarta, HFI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (232.313 KB) | DOI: 10.21009/03.SNF2017.02.MPS.03

Abstract

Abstract Has successfully tested thermal conductivity on spinach leaves by using Thermal Conductivity Apparatus. Thermal conductivity Apparatus assisted with Steam generator, Caliper, Micrometer, and iron. The thermal conductivity value of spinach leaves is 0.5208 watts / (m.K). This thermal conductivity test on foliage, fruits using Thermal Conductivity Apparatus are very easy to do in Basic Physics Laboratory by physics study program students in Indonesia. Keywords: Thermal Conductivity, Leaf spinach, Thermal Conductivity Apparatus, watt/(m.K).
SISTEM KENDALI SUHU DAN PEMANTAUAN KELEMBABAN UDARA RUANGAN BERBASIS ARDUINO UNO DENGAN MENGGUNAKAN SENSOR DHT22 DAN PASSIVE INFRARED (PIR) Hannif Izzatul Islam; Nida Nabilah; Sofyan Sa'id Atsaurry; Dendy Handy Saputra; Gagat Mughni Pradipta; Ade Kurniawan; Heriyanto Syafutra; Irmansyah Irmansyah; Irzaman Irzaman
PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) Vol 5 (2016): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2016
Publisher : Program Studi Pendidikan Fisika dan Program Studi Fisika Universitas Negeri Jakarta, LPPM Universitas Negeri Jakarta, HFI Jakarta, HFI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (989.029 KB) | DOI: 10.21009/0305020123

Abstract

We have been successfully to create a Control System Temperature and Air Humidy Monitoring Room Based on Arduino Uno with DHT22 Sensor and Passive Infrared (PIR). DHT22 Sensor be used as a measurement of temperature and air humidity in the room and Passive Infrared Sensor as a tool of detection the movement of people in a room. In this experiment, carried out tests of the DHT22 sensor and digital thermometer with a type AZ-HT-02 to room temperature with a hot air given through a hairdryer for 3 minutes with a span of per 10 seconds. In this test, the obtained data is that the room temperature is which measured by DHT22 sensor have an average difference of 0.93 against digital thermometer (as a calibration). In this test also obtained DHT22 sensor more sensitive Rrelative Humidity (RH), this is caused when given the hot air, humidity measured more rapid adjustment and yet different with digital temperature was slow to adjust air humidity in the room. This device using an Arduino Uno board, a Liquid Crystal Display (LCD) module and Real Time Clock (RTC) as a display of the temperature and air humidity in real time. This device is connected to a fan that can stabilize the room temperature are considered less convient to do activities in the room. Keywords: Air Humidity, Arduino Uno, DHT22 Sensor, Passive Infrared Sensor, Temperature.
PEMBUATAN ALAT SPIN COATER BERKECEPATAN SUDUT TINGGI BERBASIS ARDUINO UNO Sofyan Sa'id Atsaurry; Hannif Izzatul Islam; Nida Nabilah; Dendy Handy Saputra; Gagat Mughni Pradipta; Ade Kurniawan; Heriyanto Syafutra; Ardian Arif; Irzaman Irzaman
PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) Vol 5 (2016): PROSIDING SEMINAR NASIONAL FISIKA (E-JOURNAL) SNF2016
Publisher : Program Studi Pendidikan Fisika dan Program Studi Fisika Universitas Negeri Jakarta, LPPM Universitas Negeri Jakarta, HFI Jakarta, HFI

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (450.962 KB) | DOI: 10.21009/0305020126

Abstract

We have managed to create a high corner velocity spin coater based Arduino Uno. This device assisted with brushless motor and infrared sensor as detection of brushless motor rotation. In experiment conducted research corner velocity of brushless motor on input value 1000 rpm, 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm, 6000 rpm, 7000 rpm, 8000 rpm, 9000 rpm, 10000 rpm, 11000 rpm, 12000 rpm, 13000 rpm, 14000 rpm, 15000 rpm,16000 rpm, 17000 rpm, 18000 rpm, 19000 rpm, and 20000 rpm on spin coater. In this research data showed that the corner velocity that measured by spin coater has difference average is 82.67 rpm with tachometer. Keywords: Arduino, Microcontroller, Brushless Motor, PID, Spin Coating.
Implementasi Sistem Keamanan Pintu Otomatis Berbasis Face Recognition di Proactive Robotic: Integrasi ESP32-Cam dan Telegram Heriyanto Syafutra; Thufeil Muhammad Nur Aziz; Inna Novianty; Irmansyah Irmansyah; Muhamad Chusnu; Dwi Prayoga
Jurnal Riset Fisika Indonesia Vol 4 No 2 (2024): Juni 2024
Publisher : Jurusan Fisika, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jrfi.v4i2.5380

Abstract

The research focuses on implementing an automatic door lock system based on face recognition using the ESP32-Cam microcontroller and integrating it with the Telegram platform. The system is designed to enhance security at Proactive Robotic by leveraging IoT technology for office door access control. System design began with needs analysis and identification of existing security issues which do not integrate with other smart home systems at the institution. Development methods included hardware and software design, circuit schematic creation, PCB production, and physical assembly. System testing ensured facial detection, recognition, and essential solenoid operation in varying lighting conditions. Test results showed the system accurately recognizes registered faces under standard lighting, automatically unlocks doors, and sends real-time notifications via Telegram. However, system accuracy under low-light conditions needs improvement, as well as enhanced user data security to protect stored information privacy. This research contributes to developing IoT and face recognition-based security applications. The system successfully implements cutting-edge technology to improve physical security and access management in office environments, laying the foundation for future advancements in security technology.
Mass Rearing of Foliar Nematode Aphlenchoides fragariae on Fungal Culture: Mass Rearing of Foliar Nematode Aphlenchoides fragariae on Fungal Culture Kurniawati, Fitrianingrum; Supramana; Hidayat, Sri Hendrastuti; Tondok, Efi Toding; Syafutra, Heriyanto
Jurnal Fitopatologi Indonesia Vol 20 No 1 (2024): Januari 2024
Publisher : The Indonesian Phytopathological Society (Perhimpunan Fitopatologi Indonesia)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14692/jfi.20.1.24-31

Abstract

Mass Rearing of Foliar Nematode Aphlenchoides fragariae on Fungal Culture This research investigated the in vitro cultivation of the foliar nematode Aphelenchoides fragariae, which can feed on both plants and fungi. As there was no prior information available in Indonesia, this study aimed to establish an efficient method for mass rearing, thereby supporting future research. Five fungal cultures i.e. Alternaria porri, Fusarium oxysporum, Botrytis cinerea, Pythium sp., and Rhizopus sp. grown in potato dextrose agar were evaluated as potential growing media at three different temperatures: 16, 28, and 37 ℃. Nematodes were surface-sterilized with streptomycin sulfat 0.1% before being introduced into the fungal cultures. Results showed that A. porri was the most favourable culture for A. fragariae reproduction, particularly at 28 ℃. Under these conditions, the average final population reached 407.8 nematodes per petri dish. Notably, A. fragariae failed to thrive at 37 ℃ in all tested fungal media. This suggests that the optimal temperature for its reproduction ranges between 16 and 28 ℃. This study provides valuable insights into the in vitro cultivation of A. fragariae, paving the way for further research utilizing this nematode species.
Direct Electric System untuk Mengeliminasi Nematoda Radopholus similis pada Medium Tanam Dracaena reflexa: Direct Electric System to Eliminate Radopholus similis Nematodes in Planting Medium for Dracaena reflexa Indahsari, Rizkhi; Supramana, Supramana; Munif, Abdul; Syafutra, Heriyanto
Jurnal Fitopatologi Indonesia Vol 20 No 5 (2024): September 2024
Publisher : The Indonesian Phytopathological Society (Perhimpunan Fitopatologi Indonesia)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14692/jfi.20.5.217-225

Abstract

Tanaman Song of India (Dracaena reflexa) merupakan komoditas ekspor Indonesia dengan tujuan Jepang, Malaysia, Korea Selatan, Singapura dan Eropa. Ditemukannya nematoda pelubang akar Radopholus similis pada medium tanam kokopit menyebabkan dikeluarkannya Notification of Non-Compliance (NNC) oleh negara tujuan. Penelitian ini bertujuan mengekplorasi penggunaan teknik Direct Electric System (DES) untuk mengeliminasi nematoda pelubang akar R. similis yang ditemukan pada medium tanam kokopit. Percobaan laboratorium dilakukan untuk mengevaluasi efek penggunakan DES pada berbagai tegangan, jarak elektroda dan lama pemaparan pada medium tanah dan kokpit terhadap mortalitas R. similis. Percobaan rumah kaca dilakukan untuk mengetahui pengaruh DES terhadap mortalitas R. similis dan pertumbuhan tanaman D. reflexa. Hasil penelitian menunjukkan bahwa pada medium tanah dan kokopit kematian nematoda berturut-turut sebesar 83.46% dan 86.17% tercapai dengan tegangan DES 1500 V, serta jarak elektroda 1 dan 2 cm selama 15 menit. Perlakuan DES pada tegangan 1500 V selama 15 menit pada medium kokopit tidak menurunkan pertumbuhan D. reflexa di rumah kaca.
Analysis Lattice Constant of Ceramic SrTiO3 Doped Cuprum(II) Acetate Cube Structure by Cramer-Cohen Method Handayani, Pipit; Mufarrohah, Fatihatul; Asih, Asih; Rahmawaty, Vania; Santi, Maya Ary; Rukyati, Anis Munir; Siskandar, Ridwan; Syafutra, Heriyanto; Pratama, Erdiansyah; Setiawan, Ardian Arif; Irzaman, Irzaman
JIPF (Jurnal Ilmu Pendidikan Fisika) Vol 9, No 2 (2024): May 2024
Publisher : STKIP Singkawang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26737/jipf.v9i2.5004

Abstract

Analysis of SrTiO3 ceramics with the doping Cuprum(II) acetate (Cu(CH3COO)2), the variation in the concentration of doping used 0%; 0,5%; and 1% using the solid state reaction method was successful. The annealing process is carried out starting from room temperature then raised to an annealing temperature of 850 oC with a temperature increase of 1,67 oC / minute and held constant for 8 hours. Next proceed with the cooling process until it returns to room temperature for 13 hours. Analysis of XRD data using the Cramer-Cohen method yielded a lattice parameter of 3,909 Å; 3,906 Å; and 3,905 Å, a cubic crystal structure.