Sutawanir Darwis
Statistika, Universitas Islam Bandung

Published : 32 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 32 Documents
Search

On Estimating the Transition Probabilities: A Case Study Sutawanir Darwis; Kuslan Kuslan
Jurnal Matematika & Sains Vol 13, No 1 (2008)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

In actuarial science, a multistate process deals with the joint distribution of two random variables: time until termination and cause of the termination. In a three state process (active, retired, death), an insured in active state canbecome retired according to a force of decrement of retired, insured in retired state can move to death state accordingto a force of decrement of mortality. The main issues are the development of the estimation methods for transitionprobabilities and its implementation on a real data set. Analytical studies of multistate model are well developed in theliterature. However, the empirical studies based on real data set rarely reported. Furthermore, published works focusedon modeling the transition probabilities as function of period of transition. This work presents an extension of transitionprobabilities as function of age of insured and period of transition. A case study of modeling three state process andmethodology for estimating the model parameters from an insurance database under constant forces of decrement ispresented. The forces of decrement was estimated using single decrement moment estimation procedure, and yields atransition probability for a three state models. This paper aims to contribute to the development of empirical transitionprobabilities of multistate model based on real data set as an alternative to the traditional approach to doubledecrement modelling.
Spectral Decomposition of Transition Matrix Sutawanir Darwis; Kuslan Kuslan
Jurnal Matematika & Sains Vol 13, No 3 (2008)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The transition probabilities of a two-state Markov process can be determined explicitly. The modeling of forcetransition of two state Markov process using double decrement approach is well developed in the literature. However,the approaches are mainly analytic or illustrative and are based on small data set. The study based on large data set arerarely published. For higher number of states, the computation of transition probabilities is laborious, and analternative method is needed. This work aims to propose a spectral approach of forces of transition that attempts toaddress the issues. The method is based on results that are available when a Markov process with constant forces oftransition is assumed. In this case, transition probabilities are obtained regardless of the number of states. A differentialequation is used to express the relationship between forces of decrements and transition probabilities, and by assumingconstant force, the explicit solution is reduced to spectral decomposition of force of decrements. The results are thevisualization of transition probabilities, and a contribution for the development of double decrement table. The maincontributions of this work are a spectral representation of transition probabilities and a multistate approach to doubledecrement modeling.
Estimating Hyperbolic Decline Curves Parameters Sri Wahyuningsih; Sutawanir Darwis; Agus Yodi Gunawan; Kurni Permadi
Jurnal Matematika & Sains Vol 13, No 4 (2008)
Publisher : Institut Teknologi Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The decline curve analysis refers to the estimation of some measure of well performance. The linearization of Arps hyperbolic decline curves leads to the estimation of initial value of decline exponent. This work proposes a graphical method to estimate the initial value of decline exponent and a binomial expansion to estimate the decline rate and the initial production value. The graphical approach is used to determine the initial value of the decline exponent for binomial expansion of hyperbolic Arps equations. Experimental study from some small data sets shows that our proposed method is capable in reducing the number of iterations needed in binomial linearization of hyperbolic decline curves. The main contribution of this work is a development of initial decline exponent estimation using graphical approach where the traditional approach is based on trial and error. Bias in estimating the initial values can produce large number of iterations in estimating the decline exponent. The proposed method is successfully reduce the number of iterations in estimating the decline exponent. Experimentally, this study indicates the existence of lower bound of decline exponent b* for each iteration using hyperbolic binomial expansion.  
ROBUST DECLINE CURVE ANALYSIS Darwis, Sutawanir; Ruchjana, Budi Nurani; Permadi, Asep Kurnia
Journal of the Indonesian Mathematical Society Volume 15 Number 2 (October 2009)
Publisher : IndoMS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22342/jims.15.2.50.105-111

Abstract

Empirical decline curve analysis of oil production data gives reasonable answer in hyperbolic type curves situations; however the methodology has limitations in fitting real historical production data in present of unusual observations due to the effect of the treatment to the well in order to increase production capacity. The development ofrobust least squares offers new possibilities in better fitting production data using declinecurve analysis by down weighting the unusual observations. This paper proposes a robustleast squares fitting lmRobMM approach to estimate the decline rate of daily production data and compares the results with reservoir simulation results. For case study, we usethe oil production data at TBA Field West Java. The results demonstrated that theapproach is suitable for decline curve fitting and offers a new insight in decline curve analysis in the present of unusual observations.DOI : http://dx.doi.org/10.22342/jims.15.2.50.105-111
ROBUST DECLINE CURVE ANALYSIS Sutawanir Darwis; Budi Nurani Ruchjana; Asep Kurnia Permadi
Journal of the Indonesian Mathematical Society Volume 15 Number 2 (October 2009)
Publisher : IndoMS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22342/jims.15.2.50.105-111

Abstract

Empirical decline curve analysis of oil production data gives reasonable answer in hyperbolic type curves situations; however the methodology has limitations in fitting real historical production data in present of unusual observations due to the effect of the treatment to the well in order to increase production capacity. The development ofrobust least squares offers new possibilities in better fitting production data using declinecurve analysis by down weighting the unusual observations. This paper proposes a robustleast squares fitting lmRobMM approach to estimate the decline rate of daily production data and compares the results with reservoir simulation results. For case study, we usethe oil production data at TBA Field West Java. The results demonstrated that theapproach is suitable for decline curve fitting and offers a new insight in decline curve analysis in the present of unusual observations.DOI : http://dx.doi.org/10.22342/jims.15.2.50.105-111
Penerapan Metode K-Nearest Neighbors (kNN) pada Bearing Anggi Priliani Yulianto; Sutawanir Darwis
Jurnal Riset Statistika Volume 1, No. 1, Juli 2021, Jurnal Riset Statistika (JRS)
Publisher : UPT Publikasi Ilmiah Unisba

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (982.36 KB) | DOI: 10.29313/jrs.v1i1.16

Abstract

Abstract. Monitoring the condition of the engine is a top priority to avoid damage. To know the condition of the bearing, it is important to know the remaining useful life of the machine. In the IEEE PHM 2012 Prognostic Challenge platform provides real data related to accelerated bearing degradation carried out under constant operating conditions and online controlled variables of temperature and vibration (with horizontal and vertical accelerometers). In this platform, the data used is bearing2_3 data in the horizontal direction which has a duration of about 2 hours, calculated RMS every 1/10 second (2560 data). In this study machine learning based modeling will be done using the k-nearest neighbor (kNN) method to determine the prediction of RMS bearings. The kNN method is based on the classification of objects based on training data that is the closest distance to the object. kNN is a nonparametric machine learning algorithm which is a model that does not assume distribution. The advantage is that the class decision line produced by the model can be very flexible and very nonlinear. The smallest MSE value was obtained at k = 16 with MSE value = 0.157579. After getting the optimum k value, proceed with predicting a RMS of 97 lags and identifying bearing performance in several phases. Abstrak. Pemantauan kondisi mesin menjadi prioritas utama untuk menghindari adanya kerusakan. Untuk mengetahui kondisi bantalan, penting untuk mengetahui sisa masa manfaat dari mesin tersebut. Dalam platfrom IEEE PHM 2012 Prognostic Challenge ini menyediakan data nyata terkait dengan degradasi bantalan yang dipercepat yang dilakukan di bawah kondisi operasi konstan dan variabel yang dikendalikan secara online berupa suhu dan getaran (dengan akselerometer horizontal dan vertikal). Dalam platform ini, data yang digunakan adalah data bearing2_3 pada arah horizontal yang berdurasi sekitar 2 jam ini dihitung RMS setiap 1/10 detik (2560 data). Dalam penelitian ini akan dilakukan pemodelan berbasis machine learning menggunakan metode k-nearest neighbor (kNN) untuk mengetahui prediksi RMS bearing. Metode kNN didasarkan pada klasifikasi terhadap objek berdasarkan data pelatihan yang jaraknya paling dekat dengan objek tersebut. kNN merupakan salah satu algoritma pembelajaran mesin yang bersifat nonparametrik yakni model yang tidak mengasumsikan distribusi. Kelebihannya adalah garis keputusan kelas yang dihasilkan model tersebut bisa jadi sangat fleksibel dan sangat nonlinier. Nilai MSE terkecil diperoleh pada k = 16 dengan nilai MSE = 0,157579. Setelah mendapatkan nilai k optimum, dilanjutkan dengan memprediksi RMS sebanyak 97-lag serta mengidentifikasi performance kinerja bearing dalam beberapa fase.
Prediksi Sisa Umur Bearing Menggunakan Distribusi Weibull Uun Unaijah; Sutawanir Darwis
Jurnal Riset Statistika Volume 2, No. 1, Juli 2022, Jurnal Riset Statistika (JRS)
Publisher : UPT Publikasi Ilmiah Unisba

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (215.497 KB) | DOI: 10.29313/jrs.vi.909

Abstract

Abstract. The condition of the machine to avoid damage, the machine must always be monitored so that there is no decrease in operating time or unexpected damage to the machine. The condition of the health of the machine can detect, classify and predict future failures, it is very important in reducing operating and maintenance costs. There are several methods to analyze the life of the machine, one of which is the analysis using the Weibull distribution which can be used to estimate reliability, maintenance, and can be used to estimate damage. The data used in this study is secondary data obtained from the Intelligent Maintenance System (IMS), IEEE PHM 2012 through FEMTO-ST Institute storage and the Zhai Journal with the title Analysis of Time-to-Failure Data with Weibull Model in Product Life Cycle Management. Determine Time to Failure by determining the maximum value in each period. The results of data analysis from research conducted on the prediction of the remaining life of the bearing machine, it is found that the Weibull distribution can be used to analyze failure data using the smallest method based on the maximum probability and probability. However, in this case the method using the least squares method is more accurate than the maximum likelihood method. Abstrak. Pemantauan kondisi mesin untuk menghindari adanya kerusakan, mesin harus selalu dipantau agar tidak terjadi penurunan waktu operasi atau kerusakan pada mesin yang tak terduga. Kondisi dari kesehatan mesin dapat mendeteksi, mengklasifikasikan dan memperkirakan kerusakan yang akan datang, hal tersebut sangat penting dalam mengurangi biaya operasi dan pemeliharaan. Terdapat beberapa metode untuk menganalisis masa pakai mesin salah satunya analisis dengan menggunakan distribusi Weibull yang dapat digunakan untuk memperkirakan tentang persoalaan reliability, mantainability dan dapat digunakan untuk memperkirakan kerusakan bearing. Data yang digunakan pada penelitian ini adalah data sekunder yang diperoleh dari Intelligent Maintenance System (IMS), IEEE PHM 2012 melalui penyimpanan FEMTO-ST Institute dan Jurnal Zhai dengan judul Analysis of Time-to-Failure Data with Weibull Model in Product Life Cycle Management. Penentuan Time to Failure yaitu dengan menentukan nilai maksimum dalam setiap periode. Berdasarkan hasil analisis data dari penelitian yang dilakukan tentang prediksi sisa umur mesin bearing maka didapatkan bahwa distribusi Weibull dapat digunakan untuk menganalisis data waktu kegagalan dengan menggunakan estimasi metode kuadrat terkecil dan maksimum likelihood. Namun dalam hal ini metode dengan menggunakan metode kuadrat terkecil lebih akurat dibandingkan metode maksimum likelihood.
Analisis Survival pada Tungsten dan Degradasi Bearing Menggunakan Regresi Weibull Gimma Sefira Alamsya; Sutawanir Darwis
Bandung Conference Series: Statistics Vol. 1 No. 1 (2021): Bandung Conference Series: Statistics
Publisher : UNISBA Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (247.066 KB) | DOI: 10.29313/bcss.v1i1.37

Abstract

Abstract. Many products are needed by humans in various industries that’s why the selection of materials must be in accordance with the needs because it will affect the quality of the machine. Tungsten carbide is one of the working materials used because of its strong. Bearing is one of the results of the manufacture of tungsten carbide material that acts as a support for a shaft so that it always rotates without friction. Survival analysis will be used to determine the resistance of a machine's strength. The Weibull distribution has a small functional sample size for failure accuracy. We will discuss the application of Weibull regression with the Maximum Likelihood Estimation (MLE) as parameter estimates. This study uses data from the University of Durham, by Braiden, Green and Wright (1982) from experimental results of the stress level test of tungsten carbide cobalt alloy which produces data on stress rates and failure stresses. Tests on 5 different stress rates against twelve observations and it is proven that the stress rate has a significant effect on failure stresses. Then the next data is bearing vibration data from Prognostics and Health Management, FEMTO ST-Institute which consists of 17 bearings with horizontal and vertical directions so that in total there are 34 observations. With time to failure data as the dependent variable and speed and load as independent variables. The result is that only variable speed has a significant effect on time to failure. Abstrak. Banyak produk yang dibutuhkan manusia di berbagai industri itulah mengapa pemilihan bahan harus sesuai dengan kebutuhan karena akan mempengaruhi kualitas mesin. Tungsten karbida merupakan salah satu material kerja yang digunakan karena sifatnya yang kuat. Bearing adalah salah satu hasil pembuatan material tungsten karbida yang berperan sebagai tumpuan sebuah poros agar selalu berputar tanpa adanya gesekan. Akan digunakan analisis survival untuk mengetahui ketahanan kekuatan suatu mesin. Distribusi weibull memiliki bentuk fungsional sampel yang kecil untuk keakuratan kegagalan. Akan dibahas penerapan regresi weibull dengan metode Maximum Likelihood Estimation (MLE) sebagai taksiran parameter. Penelitian ini menggunakan data sekunder University of Durham, oleh Braiden, Green and Wright (1982) hasil eksperimen uji tingkat tekanan paduan tungsten karbida kobalt alloy yang menghasilkan data stress rates dan failure stresses. Pengujian pada 5 stress rates berbeda terhadap dua belas observasi dan terbukti bahwa stress rate berpengaruh secara signifikan terhadap failure stresses. Lalu data selanjutnya adalah data vibrasi bearing dari Prognostics and Health Management, FEMTO ST-Institute yang terdiri dari 17 bearing dengan arah horizontal dan vertikal sehingga ditotalkan ada 34 observasi. Dengan data time to failure sebagai variabel dependen serta speed dan load sebagai variabel independent. Dihasilkan bahwa hanya variabel speed berpengaruh seccara signifikan terhadap time to failure.
Deteksi Kerusakan Bearing Menggunakan Hotelling T2 Rejeki Wulan Islamiyati; Sutawanir Darwis
Bandung Conference Series: Statistics Vol. 2 No. 2 (2022): Bandung Conference Series: Statistics
Publisher : UNISBA Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (435.885 KB) | DOI: 10.29313/bcss.v2i2.3893

Abstract

Abstract. Bearing is the main component of the machine, used to support the shaft. in such a way that the shaft rotates smoothly. If the machine is used continuously, it will cause a decrease in engine performance which will result in Bearing damage. The method that will be used in this research is Hotelling T2 through principal component analysis. The Bearing failure diagnosis will consider statistical features consisting of maximum, minimum, mean, standard deviation, skewness, kurtosis, range, root mean square (RMS), peak-value, crest-factor and shape-factor. Principal component analysis was used to construct the Hotelling T2 statistic. The data used in this study is secondary data obtained from the NASA website. Two types of damage to Bearings are normal and faulty. Based on the study's results, it can be reduced to six main components using AKU as many as eleven main components. In hypothesis testing, the Bearing is detected as damaged when the T2 statistic value > 17.057 (α=1%). With a significance level of 1%, 428 samples were detected as faulty Bearings, and the remaining 435 were detected as normal Bearings. The results of detecting Bearings using Hotelling T2 cannot be used because the predicted data do not match the actual data confirmed by the Hotelling T2 control chart. In addition, the results of the main component plots and biplots for the two Bearing conditions cannot be separated based on the data pattern. This means that the Hotelling T2 method cannot be applied and cannot separate the two Bearing conditions. Abstrak. Bearing merupakan komponen utama mesin, digunakan untuk menopang poros. sedemikian rupa agar poros tersebut berputar dengan lancar. Apabila mesin digunakan secara terus menerus akan menyebabkan penurunan kinerja mesin yang akan mengakibatkan kerusakan Bearing. Metode yang akan digunakan dalam penelitian adalah Hotelling T2 melalui analisis komponen utama. Diagnosis kerusakan pada Bearing akan mempertimbangkan fitur statistik yang terdiri dari maximum, minimum, mean, standar deviasi, skewness, kurtosis, range, root mean square (RMS), peak-value, crest-factor dan shape-factor. Analisis komponen utama digunakan untuk mengkontruksi statistik Hotelling T2. Data yang digunakan pada penelitian ini adalah data sekunder yang diperoleh dari situs NASA. Dua jenis kerusakan pada Bearing terdiri dari normal dan rusak. Berdasarkan hasil penelitian, menggunakan AKU sebanyak sebelas komponen utama, dapat direduksi menjadi enam komponen utama. Dalam pengujian hipotesis, Bearing terdeteksi rusak ketika nilai statistik T2 > 17,057 ( . Dengan taraf signifikansi sebesar 1%, didapatkan sebanyak 428 sampel terdeteksi sebagai Bearing rusak sisanya sebanyak 435 terdeteksi sebagai Bearing normal. Hasil dari mendeteksi Bearing menggunakan Hotelling T2 tidak dapat digunakan karena data hasil prediksi yang tidak sesuai dengan data sesungguhnya yang dikonfirmasi dengan diagram kendali Hotelling T2. Selain itu, hasil plot komponen utama serta biplot untuk kedua kondisi Bearing tidak dapat dipisahkan berdasarkan pola data. Artinya, metode Hotelling T2 tidak dapat diterapkan serta tidak dapat memisahkan kedua kondisi Bearing.
Visualisasi Kerusakan Bearing Menggunakan Metode Independent Component Analysis (ICA) Silvya Rahmatiara Putri; Sutawanir Darwis
Bandung Conference Series: Statistics Vol. 2 No. 2 (2022): Bandung Conference Series: Statistics
Publisher : UNISBA Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (510.792 KB) | DOI: 10.29313/bcss.v2i2.4236

Abstract

Abstract. Vibration is a response of a mechanical system either caused by a given excitation force or changes in operating conditions as a function of time. The force that causes this vibration can be caused by several sources such as contact/impact between moving/rotating components, rotation of an unbalanced mass, misalignment and also Bearing faults which will be the topic of this research. The data used is Bearing vibration data obtained from the Prognostics Center of Excellence (PcoE) through prognostic data storage donated by the Intelligent Maintenance System (IMS), University of Cincinnati in 2003. Principal Component Analysis (PCA) method is used to see how many components resulting from. Furthermore, the selected component from the Principal Component (PC) becomes the basis for the component results from the Independent Component Analysis (ICA) which is used to visually see the distribution of data. In this thesis presents ICA and compare with Principal Component Analysis (PCA). In the visual results of the plot of the Principal Component and Independent Component Bearing damage, it can be identified that each damage produces a different form of vibration after being reduced. Abstrak. Getaran merupakan respon dari sebuah sistem mekanik baik yang diakibatkan oleh gaya eksitasi yang diberikan maupun perubahan kondisi operasi sebagai fungsi waktu. Gaya yang menyebabkan getaran ini dapat ditimbulkan oleh beberapa sumber misalnya kontak/benturan antar komponen yang bergerak/berputar, putaran dari massa yang tidak seimbang (unbalance mass), misalignment dan juga karena kerusakan bantalan (Bearing fault) yang akan menjadi topik penelitian ini. Data yang digunakan yaitu data vibrasi Bearing yang diperoleh dari Prognostics Center of Excellence (PcoE) melalui penyimpanan data prognostik yang disumbangkan oleh Intelligent Maintenance System (IMS), University of Cincinnati pada tahun 2003. Metode Analisis Komponen Utama (AKU) digunakan untuk melihat berapa komponen yang dihasilkan. Selanjutnya komponen terpilih dari Komponen Utama (KU) menjadi dasar untuk hasil komponen dari Independent Component Analysis (ICA) yang digunakan untuk melihat sebaran data dengan visual oleh plot, sehingga menghasilkan beberapa komponen. Dalam skripsi ini akan disajikan ICA dalam statistik dan bandingkan metode ini dengan Analisis Komponen Utama (AKU). Pada hasil visual plot Komponen Utama dan Independent Component kerusakan Bearing dapat diidentifikasi bahwa pada setiap kerusakan menghasilkan bentuk getaran yang berbeda-beda setelah direduksi.