Claim Missing Document
Check
Articles

Found 34 Documents
Search

Penguat Audio Kelas D Dengan Umpan Balik Tipe Butterworth Dewantoro, Gunawan; Setiaji, Franciscus Dalu; Pragustha, Tio
JURNAL NASIONAL TEKNIK ELEKTRO Vol 5, No 1: Maret 2016
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (506.977 KB) | DOI: 10.25077/jnte.v5n1.178.2016

Abstract

A class D amplifier would, in ideal sense, amplify signals without any noises and distortions which yield 100% efficiency and 0% Total Harmonic Distortion (THD). However, class D amplifiers have some drawbacks that lead to nonlinearity and increasing THD. Therefore, a feedback mechanism was employed to enhance THD performance of amplifier. Some feedback techniques have been using first order filter in the feedback path to retrieve audio signals. This research proposed a second order filter with Butterworth approach. A power amplifier was realized using full-bridge amplifier with MOSFETs to provide greater power. This class D amplifier was designed to meet following specifications: maximum output power up to 32.6 W with an 8 Ω load, sensitivity of 90 mV/W, frequency response ranging from 20 Hz – 20 kHz with tolerance ± 1 dB, THD as low as 1.1 %, SNR up to 90.16 dB, and efficiency of 82.1%.    Keywords : Class D Amplifier, Feedback, Butterworth, Total Harmonic Distortion                                                                                    Abstrak—Proses penguatan sinyal pada penguat kelas D idealnya tidak terdapat derau dan distorsi sehingga penguat kelas D dapat menghasilkan efisiensi hingga 100 % dan THD (Total Harmonic Distortion) 0%. Namun pada praktisnya, penguat kelas D memiliki beberapa kekurangan yang menyebabkan keluaran penguat kelas D menjadi tidak linear sehingga mengakibatkan naiknya THD. Oleh karena permasalahan tersebut, diberikan sutau mekanisme umpan balik negatif yang dapat memperbaiki kualitas THD dari penguat. Beberapa teknik umpan balik negatif menggunakan tapis orde 1 pada umpan balik untuk mendapatkan frekuensi audio. Penelitian ini merancang teknik umpan balik negatif menggunakan tapis orde 2 dengan pendekatan Butterworth. Penguat daya diwujudkan menggunakan penguat jembatan penuh dengan MOSFET yang dapat menghasilkan daya lebih besar. Penguat kelas D yang dibuat mempunyai spesifikasi antara lain: daya keluaran maksimum mencapai 32,6 Watt pada beban 8 Ω, dengan kepekaan penguat 90 mV/W, memiliki tanggapan frekuensi 20 Hz – 20 kHz dengan toleransi ± 1 dB, THD dengan umpan balik mencapai 1,1 % , SNR hingga 90,16 dB serta efisiensi penguat mencapai 82,1%.                                                       Kata Kunci : Penguat Kelas D, Umpan Balik, Butterworth, Total Harmonic Distortion
Gain Minimum untuk Menjaga Stabilitas Non-inverting Amplifier Op Amp yang Berbeban Kapasitif Dalu Setiaji, F.
Jurnal Teknik Elektro Vol 5, No 1 (2005): MARET 2005
Publisher : Institute of Research and Community Outreach

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (190.346 KB) | DOI: 10.9744/jte.5.1.

Abstract

Non-inverting amplifier is one of the two basic operational amplifier (op amp) circuits. In this type of amplifier product between close loop gain at zero hertz (ADC) and bandwidth (BW) will be constant and equal to unity-gain frequency (ft). A capacitive load (CL) together with op amp output resistance (R0) will create a new pole at frequency fp, thus modifying frequency response of the amplifier. If ft greater than fp , a non-inverting amplifier might become unstable by having a high overshoot on its step response. One of the references used in this paper stated that the amplifier will be stable if ADC equal or greater than 10.(fp/ft). This paper explains that we can choose ADC much lower than 10.(fp/ft) while maintaining a relatively stable non-inverting amplifier. This conclusion agrees with simulation and measurement results. Abstract in Bahasa Indonesia : Non-inverting amplifier merupakan salah satu konfigurasi dasar amplifier berbasis op amp. Pada amplifier ini, hasil perkalian antara close loop gain pada frekuensi nol (ADC) dengan bandwidth (BW) akan bernilai konstan yaitu sebesar unity-gain frequency (ft) op amp yang dipakai. Sebuah beban kapasitif pada non-inverting amplifier bersama hambatan keluaran op amp (Ro) akan menciptakan satu kutub (pole) tambahan (fp) yang memodifikasi respon frekuensi amplifier. Apabila fp lebih kecil daripada ft maka amplifier dapat menjadi tidak stabil, yang ditunjukkan dengan adanya overshoot pada step response keluaran. Salah satu acuan yang dipakai menyatakan bahwa amplifier akan mencapai kestabilan bila dipenuhi nilai ADC minimal (ADCmin) sebesar 10.(ft/fp). Makalah ini menjelaskan bahwa kita dapat memilih ADC yang jauh lebih kecil dibandingkan 10.(ft/fp) dengan tetap mempertahankan kestabilan relatif non-inverting amplifier. Kesimpulan ini didukung oleh hasil simulasi perangkat-lunak dan pengujian amplifier secara riil. Kata kunci: Non-inverting amplifier, beban kapasitif, kestabilan, gain minimum.
Peningkatan Gain dengan Teknik Multilayer Parasitic pada Perancangan Antena Mikrostrip Persegi Panjang 2,4 GHz Utami, Eva Yovita Dwi; Prabelia, Chorintan; Setiaji, Fransiscus Dalu; Wahyu, Yuyu
ELKHA : Jurnal Teknik Elektro Vol.11 No.2, October 2019
Publisher : Faculty of Engineering, Universitas Tanjungpura

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (3010.55 KB) | DOI: 10.26418/elkha.v11i2.34352

Abstract

Microstrip patch antennas offer low profile and low cost fabrication advantages but limited gain and bandwidth. Some methods and techniques have been proposed and developed to improve gain of microstrip antenna, and one of them is multilayer parasitic technique. In this paper, the design and realization of rectangular patch microstrip antenna with multilayer parasitic for enhancing antenna gain that operates at frequency of 2.4 GHz is presented. The designed antenna consists of one rectangular patch as the main antenna on the first layer and the 2x2 configuration of rectangular patches on the second and third layers as the parasitic substrate. The simulation results show that the single element antenna has a gain of 3.224 dB and increases to 8.593 dB by using the parasitic multilayer antenna. The antenna design was then fabricated using an Epoxy FR4 substrate with a dielectric constant of 4.65 and a thickness of 1.6 mm. The fabricated multilayer parasitic microstrip antenna has dimension of 80 mm x 90 mm x 34.8 mm. The measurement results show that the VSWR value is 1,284 and the return loss is -18,091 dB at the center frequency of 2,442 GHz. The gain of the multilayer parasitic microstrip antenna measurement is 9.1 dB. The operation frequency range is 2.32 - 2.565 GHz at VSWR  < 2, the bandwidth of 245 MHz is achieved and unidirectional radiation patterns are obtained.
A Fuzzy Logic-Based Automation toward Intelligent Air Conditioning Systems Dewantoro, Gunawan; Nugraha, Benedictus Edwin; Setiaji, Fransiscus Dalu
Kinetik: Game Technology, Information System, Computer Network, Computing, Electronics, and Control Vol. 5, No. 4, November 2020
Publisher : Universitas Muhammadiyah Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22219/kinetik.v5i4.1135

Abstract

Most of the energy used in residential buildings originates from air conditioners. Meanwhile, air conditioner manufacturers are addressing this issue by the production of efficient air conditioners. However, the convertible frequency air conditioners are expensive, up to 60% higher than the fixed frequency control air conditioners. Besides the human behavior in determining the temperature, setpoint plays an important role regardless of the air conditioners technology used. This study incorporated intelligence in setting up the temperature by means of specially designed remote control. The Tsukamoto fuzzy reasoning was utilized as a decision making system with two inputs, namely the outdoor temperature and the number of occupants. The device used DHT22 as the temperature sensor and HC-SR04 to detect incoming and outgoing occupants. Furthermore, the fuzzy inference system generated infrared signal associated with the temperature setpoint. This signal was received by the air conditioner receiver to adjust the temperature setpoint accordingly. The result of this study showed that the fuzzy inference system determines the temperature setpoint appropriately under variations of surrounding temperature and the number of occupants. The proposed approach yielded a satisfactory perception of thermal comfort and also a promising approach to energy conservation.
Rancang Bangun Sistem Pakar Pemantau Kualitas Air Berbasis IoT Menggunakan Fuzzy Classifier Ramadhan, Muhammad Hisyamudin; Dewantoro, Gunawan; Setiaji, Fransiscus Dalu
Jurnal Teknik Elektro Vol 12, No 2 (2020): Jurnal Teknik Elektro
Publisher : Jurusan Teknik Elektro, Fakultas Teknik, Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/jte.v12i2.25351

Abstract

The classification of water quality is vital to ensure that the water has been properly utilized. As of today, the water treatment plant employs a conventional method by taking water sample, measuring all of water quality parameters, and analyzing each sample. Besides, the conclusion-drawing processes have not been incorporated which might lead to water quality misclassification and prolonged efforts. In this study, an expert system was developed to monitor the water quality in real time fashion, therefore it could be accessed anytime and anywhere. The water quality analysis process was conducted by means of fuzzy classifier, and implemented on Arduino Mega 2560 board. The fuzzy inputs included pH value, total dissolved solid (TDS), and turbidity. A fuzzy inference system was employed to classify the water quality into three classes, namely good (meet the hygiene standards), fair, and poor (polluted). The expert system successfully yielded the inference results with a success rate of 100%. The water quality monitoring and classification could be accessed online through Internet of Things (IoT) platform Thingspeak.
Rancang Bangun Antena Mikrostrip Persegi Panjang 2,4 GHz untuk Aplikasi Wireless Fidelity (Wi-Fi) Utami, Eva Yovita Dwi; Setaiji, Franciscus Dalu; Pebrianto, Daniel
JURNAL NASIONAL TEKNIK ELEKTRO Vol 6, No 3: November 2017
Publisher : Jurusan Teknik Elektro Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (834.659 KB) | DOI: 10.25077/jnte.v6n3.406.2017

Abstract

In order to support Wi-Fi technology, a low cost antenna which has small size and easily integrated with other device is required. Therefore, microstrip antenna becomes the main candidate. In this paper, design of rectangular patch microstrip antennas which work at the frequency of 2.4 GHz (2.4– 2.49 GHz) is presented. To increase gain, we designed a two-elements rectangular patch microstrip array antenna. The measurement of the designed antenna shows that the single patch microstrip antenna is capable of working at frequency range of 2.4– 2.5 GHz with VSWR ≤ 1.92 and only has 3.9 dB gain, while two elements rectangular patch array microstrip antenna is capable of working at frequency range of 2.35 – 2.5 GHz with VSWR ≤ 1.497 and gain of 6.67 dB. Received signal level on a mobile device when this 2-elements array antenna installed on a Wi-Fi is higher than if a dipole or a single patch antenna is installed instead. Keywords : microstrip, rectangular patch, Wi-FiAbstrakUntuk mendukung teknologi Wi-Fi diperlukan antena berbiaya murah yang berukuran kecil serta mudah diintegrasikan dengan peralatan lain. Untuk itu antena mikrostrip menjadi kandidat utamanya. Pada makalah ini, dirancang antena mikrostrip patch persegi panjang yang bekerja pada frekuensi 2,4 GHz (2,4 – 2,49 GHz). Untuk meningkatkan gain, dirancang antena array dua elemen. Hasil pengukuran menunjukkan, antena mikrostrip elemen tunggal bekerja pada rentang frekuensi 2,4 – 2,5 GHz (bandwidth 100 MHz) dengan VSWR≤ 1,92 dan mempunyai gain 3,9 dB. Sedangkan antena mikrostrip array dua elemen mampu bekerja pada rentang frekuensi 2,35 – 2,5 GHz (bandwidth 150 MHz) dengan VSWR ≤ 1,497 dan memiliki gain lebih besar yaitu  6,67 dB. Level sinyal daya terima perangkat mobile  pada saat Wi-Fi router menggunakan antena array dua elemen yang dirancang, lebih baik dibandingkan dengan pada saat menggunakan antena dipole atau antena mikrostrip elemen tunggal. Kata Kunci :Mikrostrip, patch persegi panjang, Wi-Fi
REKAYASA STETOSKOP ELEKTRONIK DENGAN KEMAMPUAN ANALISIS BUNYI JANTUNG F Dalu Setiaji; Daniel Santoso; Deddy Susilo
Semantik Vol 1, No 1 (2011): Prosiding Semantik 2011
Publisher : Semantik

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (413.378 KB)

Abstract

Stetoskop akustik lazim dipakai untuk mendeteksi bunyi jantung dan paru-paru agar kondisi kesehatan organ penting tersebut diketahui. Namun karena intensitas bunyi yang dideteksi relatif lemah, dan adanya gangguan suara lingkungan, penggunaan stetoskop ini menjadi sulit, khususnya untuk mendeteksi adanya kelainan bunyi jantung seperti misalnya murmur. Maka pada makalah ini dirancang suatu stetoskop elektronik dengan memodifikasi sebuah stetoskop akustik, sehingga dapat memperjelas bunyi jantung danparu-paru, serta merekamnya. Stetoskop elektronik dibuat dengan menempatkan sebuah mikropon kondenser di dalam pipa berongga stetoskop akustik untuk mengkonversi bunyi yang ditangkap oleh chestpiece menjadi sinyal listrik. Selanjutnya sinyal tersebut akan diperkuat, lalu dilewatkan pada filter jantung atau filter paru-paru untuk memperjelas bunyi yang lebih ingin didengar di headphone. Dilakukan pula segmentasi dengan terlebih dulu mengubah sinyal jantung, S1 dan S2, menjadi pulsa-pulsa digital, sehingga durasi waktu fase sistolik dan diastolik dapat diukur oleh mikrokontroler. Mikrokontroler juga menghitung nilai BPM (Beat Per Minute) berdasarkan hasil segmentasi, dan menyimpulkan apakah nilaiBPM tersebut normal atau tidak. Hasil yang dicapai adalah stetoskop elektronik mandiri (stand alone) yang mampu memperdengarkan dan memperjelas bunyi jantung dan paru-paru. Pada saat pengukuran, chestpiece ditempelkan pada dada atau leher subyek, dan dipertahankan tidak berubah posisi sekitar 15 detik. Stetoskop elektronik ini juga dapat menampilkan nilai BPM dan menunjukkan apakah nilainyanormal, atau mengindikasikan kelainan bradycardia atau tachycardia. Jika dibandingkan dengan alat ukur buatan pabrik, yaitu OMRON tipe SEM-1, maka pengukuran BPM dapat dilakukan dua kali lebih cepat dengan ketelitian yang setara. Sinyal listrik yang menunjukkan bentuk bunyi jantung dan paru juga dapat dilihat di layar komputer dengan mempergunakan perangkat lunak Oscilloscope serta dapat direkam dalam bentuk berkas wav.Kata kunci: Stetoskop, Elektronik, Segmentasi, BPM
PERANCANGAN ANTENA MIKROSTRIP MIMO 2×2 PATCH PERSEGI PANJANG PADA FREKUENSI LTE 2,3 GHZ Eva Yovita Dwi Utami; Muhamad Asra Gupita; Fransiscus Dalu Setiaji
Jurnal Informatika dan Rekayasa Elektronik Vol. 4 No. 1 (2021): JIRE April 2021
Publisher : LPPM STMIK Lombok

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36595/jire.v4i1.296

Abstract

Pada makalah ini dilaporkan hasil perancangan dan realisasi antena mikrostrip MIMO 2×2 patch persegi panjang yang bekerja pada frekuensi 2,3 GHz. Rancangan antena disimulasikan dengan dengan software Computer Simulation Tools (CST) Microwave Studio 2016. Simulasi rancangan antenna menghasilkan mutual coupling -30,34 dB dan gain 3,035 dB. Rancangan antenna difabrikasi dengan bahan substrat FR4 Epoxy. Dari hasil pengukuran antena yang dirancang, antena memiliki nilai VSWR sebesar 1,059 dan gain sebesar 3,483 dB. Bandwidth antena ini adalah 60 MHz (2,27 MHz - 2,33 MHz). Antena ini juga memiliki nilai return loss dan mutual coupling masing-masing sebesar -22,943 dB dan -29,08 dB pada frekuensi 2,3 GHz. Antena yang direalisasikan diuji pada mobile wifi dan dapat menunjukkan perbaikan penerimaan level sinyal.
MODUL LAMPU LED YANG DICATU OLEH SEL SURYA Fransiscus Dalu Setiaji; Diestha Djati Purnomo; Deddy Susilo
Techné : Jurnal Ilmiah Elektroteknika Vol. 9 No. 01 (2010)
Publisher : Fakultas Teknik Elektronika dan Komputer Universitas Kristen Satya Wacana

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (259.022 KB)

Abstract

Makalah ini membahas tentang perancangan dan pembuatan sebuah perangkat penerangan ruangan menggunakan modul lampu LED yang dibuat dari sejumlah LED, yang dicatu sel surya. Modul lampu LED (Light-Emitting Diode) yang dibuat dibandingkan unjuk kerjanya dengan lampu pijar dan lampu CFL (compact fluorescents lamp). Orientasi sel surya dapat diatur secara manual (pasif), atau secara otomatis (aktif) menyesuaikan pergerakan matahari, untuk mendapatkan energi cahaya yang maksimal. Hasil pengujian menunjukkan modul lampu LED yang dibuat, pancarannya relatif terfokus dibandingkan lampu pijar dan lampu CFL. Sedangkan pengaturan sel surya secara aktif mampu memberikan peningkatan energi listrik yang disimpan aki sebesar 24% dalam rentang waktu pengujian 10 hari, dibandingkan dengan menggunakan pengaturan pasif.
PEMILIHAN OP-AMP PADA PERANCANGAN TAPIS LOLOS PITA ORDE-DUA DENGAN TOPOLOGI MFB (MULTIPLE FEEDBACK) Fransiscus Dalu Setiaji
Techné : Jurnal Ilmiah Elektroteknika Vol. 9 No. 02 (2010)
Publisher : Fakultas Teknik Elektronika dan Komputer Universitas Kristen Satya Wacana

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (126.037 KB)

Abstract

Tapis Lolos Pita (BPF = Band Pass Filter) dengan topologi MFB (Multiple Feedback) mempunyai keunggulan, karena faktor kualitas (Q), bati pita lewat (A0) danfrekuensi pusat (f0), dapat diatur secara independen. Pada makalah ini akan dijelaskan mengenai pemilihan nilai parameter utama op-amp, yaitu Unity Gain Frequency (fT), agar karakteristik BPF MFB orde-dua yang dirancang, khususnya f0, mendekati nilai idealnya. Hasil simulasi dengan Circuit Maker menunjukkan bahwa nilai fT harus dipilih cukup besar, yaitu sekurang-kurangnya fT = 50f0(1+2Q) agar ralat f0 di bawah 1%.