Claim Missing Document
Check
Articles

Found 14 Documents
Search

STUDI EKSPERIMENTAL PEMBUATAN BIOETANOL HASIL FERMENTASI BERAS KETAN PUTIH, KETAN HITAM DAN SINGKONG Rachmat Subagyo; Arry Eko Pristiwanto; Muchsin Muchsin
Dinamika : Jurnal Ilmiah Teknik Mesin Vol 11, No 2 (2020)
Publisher : Jurusan Teknik Mesin, Universitas Halu Oleo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33772/djitm.v11i2.11579

Abstract

Krisis energi sudah dirasakan oleh beberapa negara, kelangkaan bahan bakar harus segera diatasi. Banyak negara-negara di eropa sudah mulai menggunakan bahan bakar alternatif yang berasal dari tumbuh-tumbuhan. Beras ketan dan singkong dapat diubah menjadi bioetanol dengan metode fermentasi. Metode yang digunakan dalam penelitian ini adalah eksperimental dengan cara fermentasi kemudian melakukan destilasi untuk memperoleh bioetanol. Hasil bioetanol kemudian dideteksi untuk mencari optimasi waktu fermentasi yang tepat, pengujian dengan Pen refractometer dan Gas Chromatography. Hasil penelitian penambahan massa ragi dari 5-15 gram terbentuk kadar etanol yang semakin meningkatan dari 3,5-18,5 %, hal ini menunjukkan penambahan jumlah ragi berpengaruh signifikan terhadap hasil fermentasi bioetanol. Pengaruh ketidakstabilan mikroba yang mengurai karbohidrat menjadi etanol, saat fermentasi mengakibatkan terbentuknya senyawa-senyawa asam. Hal ini yang menyebabkan penambahan massa ragi tidak signifikan terhadap hasil fermentasinya. Waktu fermentasi yang optimal terjadi pada hari ke-4 dengan jumlah waktu 96 jam. Hasil Uji Gas kromatografi dua bahan memenuhi syarat SNI yaitu: Hasil fermentasi Ketan Putih dan Singkong.
Kaji Eksperimental Koefisien Kerugian Pada Percabangan Pipa Dengan Sudut 450, 600 dan 900 Rachmat Subagyo
Jurnal Fisika FLUX Vol 9, No 2 (2012): Jurnal Fisika FLUX Edisi Agustus 2012
Publisher : Lambung Mangkurat University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (688.09 KB) | DOI: 10.20527/flux.v9i2.6100

Abstract

Selama fluida mengalir melalui sistem instalasi perpipaan banyakterjadi rugi tekanan yang disebut sebagai rugi tekanan mayor dan rugi tekananminor (kerugian akibat fluida melewati suatu percabangan). Pembagian aliranfluida pada percabangan adalah suatu proses irreversibel. Irreversibelitas ini didalam aplikasi teknik akan menurunkan unjuk kerja dari sistem. Upaya untukmengetahui seberapa besar kerugian yang terjadi pada percabangan pipaadalah dengan mengukur koefisien kerugian yang terjadi. Bentuk eksperimenyang dilakukan adalah membuat tiga buah bentuk percabangan pipa galvanicjenis medium dengan sudut 450, 600 dan 900. Dengan variasi Re dari 0 - 5,5 x104. Hasil penelitian menunjukan bahwa Koefisien kerugian untuk cabangK3-2(45) = K3-2(60) = K3-2(90) = (0,07-0,39) dan cabang K3-1(45) = (0,95-0,60),K3-1(60) = (1,08-0,85), K3-1(90) = (1,10-1,50), untuk koefisien kerugian totalKtot(45) = (1,02-0,97), Ktot(60) = (1,15-1,23), Ktot(90) = (1,17-1,89).
ANALISA PERFORMANCE POMPA SENTRIFUGAL DI UNIT 2 PT. PUPUK KALIMANTAN TIMUR Rachmat Subagyo; Bagaskoro Rizqining Hendratno
ELEMEN : JURNAL TEKNIK MESIN Vol 8 No 1 (2021)
Publisher : POLITALA PRESS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34128/je.v8i1.156

Abstract

Penelitian ini bertujuan untuk mengetahui unjuk kerja pompa sentrifugal. Data-data yang diperlukan dalam riset ini diperoleh dari data commissioning dan data aktual pompa sentrifugal Lean Benfield Solution. Adapun data yang dibutuhkan meliputi: kecepatan (RPM), Kapasitas (Q), Head (H), Axle Power (BHP), Hydrolysis Power (WHP), Suction Pressure, Discharge Pressure, rasio Discharge Pressure dan Efficiency (ɳ). Hasil analisis perhitungan pada minggu pertama diperoleh data-data sebagai berikut: ∆P= 34,8 kg / cm2, Head (H)= 274m, Hydrolysis Power (WHP)= 84kW, Axle Power (BHP)= 116kW, Efisiensi pompa= 72%, begitu juga minggu kedua hingga minggu kedelapan. Kemudian hasil data aktual yang diperoleh dibandingkan dengan data komisioning. Hasil analisis data pada penelitian ini menunjukkan tidak ada data yang melebihi data komisioning. Data aktual tertinggi dicapai pada minggu ke delapan dengan nilai sebagai berikut: ∆P sebesar= 36kg/cm2, Head (H)= 283m, Hydrolysis Power (WHP)= 104kW, Axle Power (BHP)= 141kW dan Efisiensi= 74,8%.
ANALISA VARIASI WAKTU FERMENTASI PEMBUATAN BIOETANOL DENGAN BAHAN KULIT SINGKONG DAN KULIT NANAS Rachmat Subagyo; Wahyu Arifin
Scientific Journal of Mechanical Engineering Kinematika Vol 1 No 2 (2016): SJME Kinematika Desember 2016
Publisher : Mechanical Engineering Department, Faculty of Engineering, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (860.675 KB) | DOI: 10.20527/sjmekinematika.v1i2.31

Abstract

This study studied the best levels of bioethanol from a combination of cassava peel and pineapple peel mixtures with 6 gram yeast mass and 72 hours, 96 hours and 120 hours fermentation time, to determine the optimal fermentation time and find ethanol levels according to SNI. This research was carried out by hydrolysis or cassava peel and pineapple peel using aquades for 30 minute to break the molecule into two parts, then carried out the fermentation process using Saccharomyces Cerevisae (yeast) and the distillation process using a destilator to obtain ethanol for fermentation then tested with a Refractometer to determine whether there is an ethanol level formed from the distillation process. The best sample selected was then tested for ethanol content using the Gas Chromatography tool. The results of this study are known by using the Gas Chromatography tool to determine the ethanol content contained in the distilled sample, the highest ethanol content of each combination. So that the best ethanol yield from a combination of 100% cassava peel - 0% Pineapple Peel with a duration of 120 hours fermentation producing ethanol of 89.81% is still not included in the SNI category.
PEMBUATAN BIOGAS DENGAN VARIASI STARTER RAGI DAN KOTORAN SAPI BERBAHAN BAKU SAMPAH ORGANIK Rachmat Subagyo; Roni Wijaya
Scientific Journal of Mechanical Engineering Kinematika Vol 2 No 1 (2017): SJME Kinematika Juni 2017
Publisher : Mechanical Engineering Department, Faculty of Engineering, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (537.975 KB) | DOI: 10.20527/sjmekinematika.v2i1.36

Abstract

This study aims to determine the composition of the right starter mixture to produce optimal biogas, knowing the temperature (in digester) at the time of fermentation, knowing the effect fungal growth on the levels of biogas. Processing organic waste in small pieces given water and starter, put in bottle and covered with balloon, last process fermentation 45 days. Then samples tested using Methane Measurement System, Carbondioxide, Humidity and Temperature. Then obtained mixture 10% starter cow dung and 90% organic waste CH4 35.79 ppm and CO2 1763.34 ppm, 20% cow dung and 80% organic waste CH4 12.12 ppm and CO2 740.55 ppm, 30% cow dung and 70% organic waste, CH4 14.08 ppm and CO2 858.87 ppm, yeast 10% and organic waste 90% CH4 9.78 ppm and CO2 860.98 ppm, 20% yeast and 80% organic waste CH4 166.08 ppm and CO2 1185.35 ppm and yeast mixture 30% and 70% CH4 organic waste 16.66 ppm and CO2 927.39 ppm. The yeast mixture 20% and 80% organic waste produces most optimal CH4 with temperature in digester at fermentation 30.11 °C with value 206.76 ppm while mixture 10% cow dung and 90% organic waste produces highest CO2 at temperature 30.4 °C with value 2527.57 ppm.
KAJI EKSPERIMENTAL HIDROFOBISITAS DAUN DENGAN VARIASI VOLUME DAN BAHAN DROPLET Rachmat Subagyo; Dedi Muliadi
Scientific Journal of Mechanical Engineering Kinematika Vol 2 No 2 (2017): SJME Kinematika Juni 2017
Publisher : Mechanical Engineering Department, Faculty of Engineering, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (522.506 KB) | DOI: 10.20527/sjmekinematika.v2i2.41

Abstract

Based on the measurement of droplet contact angle on the surface of taro leaf, droplet measurement using mineral water volume 1-5 ml respectively that is 159,325°, 154,628°, 152,430°, 151,833°, 150,199°, while in sea water that is 154,011°, 152,266°, 149,265°, 149,290°, 144,345°, and on cooking oil that is 35,407°, 40,206°, 42,825°, 46,997°, 49,807°. Based on the measurement of droplet contact angle on the surface of serai leaf, droplet measurement using mineral water volume 1-5 ml respectively that is 132,791°, 130,539°, 126,367°, 124,409°, 122,005°, while at sea water that is 126,319°, 121,409° , 118,856°, 109,273°, 106,950° and on cooking oil that is 34,683°, 36,760°, 39,739°, 43,603°, 52,837°. Based on the measurement of droplet contact angle on papaya leaf surface, droplet measurements using mineral water are 87,766°, 83,538°, 82,248°, 74,157°, 71,079°, while in sea water 84,523°, 83,059°, 80,017° , 71,346°, 70,167°, and on cooking oil are 34,367°, 38,086°, 40,597°, 43,933°, 47,339°. With the difference in fluid in each leaf, it can be seen the nature of the leaf, different leaves and different fluids in droplet droplets become related to the surface causing a decrease in contact angle.
PEMBUATAN BIOETANOL BERBAHAN BAKU KULIT SINGKONG DAN KULIT NANAS DENGAN VARIASI MASSA RAGI Rachmat Subagyo; Imam Ahdi Saga
Scientific Journal of Mechanical Engineering Kinematika Vol 4 No 1 (2019): SJME Kinematika Juni 2019
Publisher : Mechanical Engineering Department, Faculty of Engineering, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (628.436 KB) | DOI: 10.20527/sjmekinematika.v4i1.47

Abstract

This study aims to determine the best bioethanol levels from a combination of cassava and pineapple peels mixture with variations of yeast mass as much as 11 grams, 13 grams, 15 grams and 72 hours fermentation time, to determine the optimal yeast mass and determine ethanol levels according to SNI. This research was carried out by hydrolysis using distilled water for 30 minutes, then fermentation using yeast and distillation process, then tested with a Refractometer Pen. Selected samples will be tested for ethanol content using the Gas Chromatography tool. The highest ethanol content of ethanol making with a combination of cassava and pineapple peels is for a combination of 75% cassava peel - 25% pineapple peel 88.6% in a 15 gram yeast mass, a combination of 50% cassava peel - 50% pineapple peel 89.3% in 15 gram yeast mass. So it can be concluded that the ethanol content of the combination of cassava and pineapple peels is not included in the category of Indonesian national standards (SNI).
ANALISIS KINERJA AC MOBIL DENGAN VARIASI FREON R-134A, HFC-134 DAN MC-134 Rachmat Subagyo Subagyo; Feri Oktapiyanor; Fadliyanur; Muchsin; Hendry Y. Nanlohy
Scientific Journal of Mechanical Engineering Kinematika Vol 6 No 2 (2021): SJME Kinematika Desember 2021
Publisher : Mechanical Engineering Department, Faculty of Engineering, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/sjmekinematika.v6i2.193

Abstract

Upaya manusia untuk menciptakan kondisi yang lebih sejuk dilakukan dengan sistem Air Conditioning (AC), salah satu AC yang digunakan pada sistem transportasi yaitu AC mobil. Coefficient of Performance (COP) merupakan perbandingan efek refrigerasi dengan kerja kompresor. Efek refrigerasi dikalkulasikan dari besarnya enthalpy refrigerant yang masuk kompresor atau enthalpy yang keluar dari evaporator dibagi dengan enthalpy refrigerant yang masuk evaporator atau enthalpy sesudah katup ekspansi. Secara lebih jelas bahwa Coefficient of Performance (COP) adalah perbandingan efektifitas pendinginan evaporator dengan kerja yang diberikan kompresor. Penelitian ini bertujuan untuk menghitung dan membandingkan Coefficient of Performance Refrigerant jenis R-134A, HFC-134 dan MC-134. Metode yang digunakan adalah secara eksperimental dengan mengkaji nilai efisiensi dari AC mobil toyota avanza 1.3cc dengan variasi Freon R 134A, HFC 134A dan MC 134. Hasil penelitian menunjukkan nilai COP aktual dan COPideal yang terbaik menggunakan MC-134 karena nilai konduktivitas termal MC-134 paling tinggi sehingga kalor yang diserap evaporator lebih tinggi yang membuat nilai dari COP yang didapat lebih tinggi. Untuk efisiensi kompresor yang terbaik menggunakan HFC-134 karena nilai viskositas dan densitas dari HFC-134 lebih tinggi yang membuat kerja kompresor lebih ringan sehingga membuat efisiensi kompresor lebih tinggi
Rancang Bangun dan Pembuatan Mobil Listrik Bertenaga Solar Cell Rachmat Subagyo; Abdul Ghofur; Gunawan Rudi Cahyono; Hajar Isworo; M. Reynaldi Perdana Saputra
Buletin Profesi Insinyur Vol 3, No 1 (2020): Buletin Profesi Insinyur (Januari-Juni)
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/bpi.v3i1.58

Abstract

Tujuan proyek ini adalah untuk mengaplikasikan ilmu teknik mesin khususnya konversi energi dalam memanfaatkan energi matahari dengan menggunakan solar cell. Metode yang digunakan adalah eksperimental diawali dengan perancangan mobil listrik yang kemudian dilanjutkan proses pembuatannya. Proyek ini menghasilkan mobil listrik dengan data teknis sebagai berikut: kapasitas penumpang: 6 orang, kecepatan maksimum: 25 km/jam, jarak tempuh: 80 km, kemampuan memanjat ≤ 0,30, jarak pengereman ≤ 4m, Min. Turning Radius: 5 m, Min Clearance: 150 mm, waktu isi ulang 8-10 jam, Daya solar cell: 200 WPKata kunci: teknik mesin, konversi energi, mobil listrik, solar cell
UJI KARAKTERISTIK PEMBAKARAN DROPLET CAMPURAN MINYAK JAGUNG-SOLAR Rachmat Subagyo; Herry Irawansyah; Bayu Aditya Wisnu
Jurnal Rekayasa Mesin Vol. 13 No. 1 (2022)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jrm.2022.013.01.26

Abstract

Corn oil may be one of the solutions to overcome biodiesel mixing as a substitute for fossil energy. In this study, we investigate the combustion characteristics of a mixture of corn oil with diesel oil. We used corn oil mixed with diesel oil using percentages 10%, 20%, 30%, 40%, and 50%. Characteristics of combustion were investigated by the time of ignition, visualization (height of fire and color of fire), flame temperature, and rate of combustion. The results show the highest ignition delay time is shown by a mixture percentage of 50%, which is 6,28 s. The flame of combustion has a yellow color. The highest flame was shown by the percentage of the mixture 10% that was as high as 66mm. The highest flame temperature in the percentage of 50% mixture with a temperature of 63,7°C. The highest combustion rate test results are shown by a 50% mixed percentage that is 0.849 s.