Claim Missing Document
Check
Articles

Found 14 Documents
Search

Perbandingan Respon Dinamis Pada Struktur Bangunan Bertingkat Tidak Beraturan Dengan Tiga Varian Konfigurasi Dinding Geser muna, mukhammad nailul; Teguh, Mochamad
Teras Jurnal : Jurnal Teknik Sipil Vol. 14 No. 2 (2024): Volume 14 Nomor 2, September 2024
Publisher : UNIVERSITAS MALIKUSSALEH

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29103/tj.v14i2.1114

Abstract

Abstrak Artikel ini menyajikan hasil perbandingan respon struktur terhadap 3 variasi konfigurasi dinding geser pada bangunan bertingkat yang tidak beraturan pada denah. Konfigurasi dinding geser difokuskan pada letak dan bentuk dinding geser pada struktur gedung beton bertulang sembilan lantai dengan denah tidak beraturan dan terletak di daerah rawan gempa. Penelitian ini bertujuan untuk menganalisis respon struktur tidak beraturan pada gedung eksisting untuk dibandingkan dengan 2 model hasil modifikasi dinding geser. Analisis struktur untuk 3 model konfigurasi dinding geser digunakan software ETABS. Hasil analisis respon struktur terendah menunjukkan base shear sebesar 21548,528 kN. deflection arah x dan y masing-masing sebesar 56,47 dan 48,48 (mm). Story drift arah x dan y sebesar 10,589 dan 8,796 (mm), sedangkan drift rate terendah pada arah x dan y sebesar 0,212 dan 0,176 (%). Dari hasil tersebut dapat disimpulkan bahwa respon struktur pada gedung eksisting lebih optimum baik letak maupun bentuk dinding geser dibandingkan 2 model lainnya. Kata kunci: simpangan; simpangan-antar-tingkat; gedung-ireguler; beban-dinamis Abstract This article compares structural responses to three variations of shear wall configurations in irregular multi-story buildings in the plan. The shear wall configuration is focused on the location and shape of the shear wall in a nine-story reinforced concrete building structure with an irregular plan located in an earthquake-prone area. This study aims to analyze the response of irregular structures in existing buildings to compare with two modified shear wall models. Structural analysis for three shear wall configuration models used ETABS software. The lowest structural response analysis results showed a base shear of 21548.528 kN. Deflection in the x and y directions were 56.47 and 48.48 (mm), respectively. Story drift in the x and y directions was 10.589 and 8.796 (mm). At the same time, the lowest drift rate in the x and y directions was 0.212 and 0.176 (%). From these results, it can be concluded that the structural response in existing buildings is more optimal in both the location and shape of the shear wall compared to the other two models. Key words: displacement; drift-ratio; irregular-building; dynamic- load
The Time History of a Specific Area in Yogyakarta with a Subduction Earthquake Source Based on the 2002 Earthquake Map Wisnu Erlangga; Mochamad Teguh; Lalu Makrup; Jafar; Maharani Dagi Saputri
Teknisia Vol 28 No 2 (2023): Teknisia
Publisher : Jurusan Teknik Sipil, Fakultas Teknik Sipil dan Perencanaan, Universitas Islam Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20885/teknisia.vol28.iss2.art3

Abstract

Indonesia is a country that is very prone to earthquake disasters. Earthquakes cause damage especially to buildings. In building planning, the usual earthquake load is the earthquake load from the spectral response. The use of earthquake loads from time history is very rarely used because of the difficulty of finding accurate data for an area. In this study, Alana Hotel and Apartment were chosen as research objects to find artificial time history. All earthquake data affecting Yogyakarta region were collected from several sources. Seismic hazard analysis in this study uses the PSHA (Probabilistic Seismic Hazard Analysis) method by calculating the main earthquake only. The selection of attenuation functions is based on the similarity of geological and tectonic conditions in Indonesia. These attenuation functions produce a seismic hazard curve and a uniform hazard spectrum response. The selection of time history data for bedrock is based on the results of the deaggregation process in the form of dominant magnitude and dominant distance from the subduction earthquake source. It is necessary to adjust the spectrum response in the time history data to fit the research location. Furthermore, earthquake waves from the bedrock are propagated to the surface. The results show that the peak time history acceleration value after surface propagation increased by 1.51 times than the time history in bedrock.
Efisiensi Penggunaan Material Blok Beton terhadap Batu Belah pada Pekerjaan Fondasi Dangkal Winarno, Setya; Nuryanto, Hari; Teguh, Mochamad
MEDIA KOMUNIKASI TEKNIK SIPIL Volume 28, Nomor 1 (2022)
Publisher : Department of Civil Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (648.748 KB) | DOI: 10.14710/mkts.v28i1.37541

Abstract

Pekerjaan fondasi dangkal yang menggunakan material batu belah memiliki kelemahan-kelemahan, misalnya, bentuk permukaan dan ukuran yang tidak beraturan, serta ketersediaannya yang langka di daerah-daerah tertentu. Kelemahan-kelemahan tersebut dapat dihindari dengan penggunaan material blok beton. Artikel ini menguraikan efisiensi penggunaan material blok beton terhadap batu belah pada pekerjaan fondasi dangkal, dengan membandingkan nilai produktivitas pekerjaan dengan biaya total pekerjaannya pada kedua material tersebut. Data penelitian diambil pada pekerjaan pemasangan fondasi pagar yang menggunakan kedua material tersebut pada sebuah lahan di Grogolan, Umbulmartani, Kecamatan Ngemplak, Kabupaten Sleman, Daerah Istimewa Yogyakarta. Hasil yang diperoleh adalah bahwa produktivitas rerata pekerjaan fondasi dangkal dengan material blok beton adalah sebesar 0,799 m3/jam, dan pada material batu belah adalah sebesar 0,590 m3/jam, atau terdapat efisiensi waktu yang lebih cepat sebesar 35,44%. Biaya pekerjaan total dengan material blok beton pada volume pekerjaan yang kecil adalah lebih mahal dari pada material batu belah, namun akan mengalami titik impas pada volume pekerjaan 11 m3, sehingga efisiensi biaya terjadi jika volume pekerjaannya lebih dari 11 m3. Selain kontribusi positif berupa efisiensi biaya yang lebih murah dan waktu pengerjaan yang lebih cepat, penggunaan material blok beton juga akan memiliki 4 manfaat yang tidak berwujud (intangible benefits), yaitu penghematan lahan penumpukan, material sisa sedikit, kemudahan pekerjaan, dan hasil pekerjaan yang lebih presisi.
Perbandingan Respon Dinamis Pada Struktur Bangunan Bertingkat Tidak Beraturan Dengan Tiga Varian Konfigurasi Dinding Geser mukhammad nailul muna; Mochamad Teguh
Teras Jurnal : Jurnal Teknik Sipil Vol. 14 No. 2 (2024): Volume 14 Nomor 2, September 2024
Publisher : UNIVERSITAS MALIKUSSALEH

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29103/tj.v14i2.1114

Abstract

Abstrak Artikel ini menyajikan hasil perbandingan respon struktur terhadap 3 variasi konfigurasi dinding geser pada bangunan bertingkat yang tidak beraturan pada denah. Konfigurasi dinding geser difokuskan pada letak dan bentuk dinding geser pada struktur gedung beton bertulang sembilan lantai dengan denah tidak beraturan dan terletak di daerah rawan gempa. Penelitian ini bertujuan untuk menganalisis respon struktur tidak beraturan pada gedung eksisting untuk dibandingkan dengan 2 model hasil modifikasi dinding geser. Analisis struktur untuk 3 model konfigurasi dinding geser digunakan software ETABS. Hasil analisis respon struktur terendah menunjukkan base shear sebesar 21548,528 kN. deflection arah x dan y masing-masing sebesar 56,47 dan 48,48 (mm). Story drift arah x dan y sebesar 10,589 dan 8,796 (mm), sedangkan drift rate terendah pada arah x dan y sebesar 0,212 dan 0,176 (%). Dari hasil tersebut dapat disimpulkan bahwa respon struktur pada gedung eksisting lebih optimum baik letak maupun bentuk dinding geser dibandingkan 2 model lainnya. Kata kunci: simpangan; simpangan-antar-tingkat; gedung-ireguler; beban-dinamis Abstract This article compares structural responses to three variations of shear wall configurations in irregular multi-story buildings in the plan. The shear wall configuration is focused on the location and shape of the shear wall in a nine-story reinforced concrete building structure with an irregular plan located in an earthquake-prone area. This study aims to analyze the response of irregular structures in existing buildings to compare with two modified shear wall models. Structural analysis for three shear wall configuration models used ETABS software. The lowest structural response analysis results showed a base shear of 21548.528 kN. Deflection in the x and y directions were 56.47 and 48.48 (mm), respectively. Story drift in the x and y directions was 10.589 and 8.796 (mm). At the same time, the lowest drift rate in the x and y directions was 0.212 and 0.176 (%). From these results, it can be concluded that the structural response in existing buildings is more optimal in both the location and shape of the shear wall compared to the other two models. Key words: displacement; drift-ratio; irregular-building; dynamic- load