Garuda - Garba Rujukan Digital

PENINGKATAN PRODUKSI DENGAN CARA MENDESAIN ULANG PROGRESSIVE CAVITY PUMP (PCP) PADA SUMUR “E” LAPANGAN “P” Eko Prastio; Abdullah Rizky Agusman
PETRO:Jurnal Ilmiah Teknik Perminyakan Vol. 10 No. 3 (2021): SEPTEMBER
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Artificial lift method in an oil well is a production engineering that use the help of surface and downhole equipment in order to achieve optimum production when the well is not suited to use natural flow as the main lifting system. But in many cases, even after artificial lift method have using, the optimum production have not achieved yet, thus resulting a redesign of the existing artificial lift is needed. This problem exists on E well that is owned by PT XYZ 1 Field Jambi using Progressive Cavity Pump (PCP) as artificial lift. From the early calculation, it is found that the current production of 17,16 bfpd has not reached the targetted production that is 48,57 bfpd. This shows a need for the existing PCP to be redesigned. Before redesigning the artificial lift, the current value of Productivity Index (PI) is needed in order to make an Inflow Performance Relationship (IPR) curve that will shows whether the oil well still worth producing or not. According to the results of this research, the value of PI is 0,47 with the maximum production at 60,72 bfpd and optimum production 48,57 bfpd. Meanwhile, the current production is only 17,16 bfpd. After the redesigning completed using R & M Energy Systems calculation methods as the provider of the current PCP, it is found that the optimal for revolution per minute (RPM), horse power (HP), torque values and the drive head type are 101,5 RPM, 2,7 HP, 15 ft-lbs and there have to be a change in drive head type AA4. To get results optimal production.

Kebijakan Pemerintah Dalam Penentuan Kontrak Gross Split Sektor Minyak Dan Gas Di Indonesia Edy Soesanto; Abdullah Rizky Agusman; M. Mahlil Nasution; Siti Fadhillah
JURNAL BHARA PETRO ENERGI Vol 2 No 1: May 2023
Publisher : Department of Petroleum Engineering

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/bpe.v2i1.2380

Abstract As a solution to the problem of the Cost Recovery production sharing contract system, the Government of Indonesia through the Ministry of Energy and Mineral Resources issued Regulation of the Minister of Energy and Mineral Resources of the Republic of Indonesia Number 08 of 2017 concerning Gross Split Production Sharing Contracts. This new regulation is motivated by the low number and length of time it took for oil and gas reserves to be discovered, accompanied by Non-Tax State Revenue (PNBP) for the upstream oil and gas sector which continues to decline. The Gross Split production sharing contract scheme also offers a reduction in bureaucracy in investing which is expected to attract investors to carry out exploration and exploitation in Indonesia. This study aims to analyze the legal principles related to Gross Split regulations in the aspect of improving the investment climate for upstream oil and gas and analyze the new role of the Oil and Gas Special Task Force as an institution appointed by the state to exercise control and supervision of the activities of Cooperation Contract Contractors in Sharing Contracts. Keywords: production, gross split, oil and gas sector, production sharing contract Abstrak Sebagai solusi atas permasalahan sistim kontrak bagi hasil Cost Recovery, Pemerintah Indonesia melalui Kementerian Energi dan Sumber Daya Mineral mengeluarkan Peraturan Menteri Energi dan Sumber Daya Mineral Republik Indonesia Nomor 08 Tahun 2017 tentang Kontrak Bagi Hasil Gross Split. Peraturan baru ini dilatarbelakangi rendahnya angka dan lamanya waktu penemuan cadangan minyak dan gas bumi, disertai Penerimaan Negara Bukan Pajak (PNBP) sektor hulu minyak dan gas bumi yang terus menurun. Skema kontrak bagi hasil Gross Split juga menawarkan pemangkasan birokrasi dalam berinvestasi yang diharapkan mampu menarik minat para investor guna melaksanakan eksplorasi dan eksploitasi di Indonesia. Penelitian ini bertujuan menganalisa kaidah hukum terkait regulasi Gross Split dalam aspek peningkatan iklim investasi hulu minyak dan gas bumi dan menganalisa peran baru Satuan Kerja Khusus Minyak dan Gas Bumi sebagai lembaga yang ditunjuk negara untuk melakukan pengendalian dan pengawasan terhadap aktifitas Kontraktor Kontrak Kerja Sama dalam Kontrak Bagi Hasil. Kata kunci: produksi, gross split, sektor minyak dan gas, kontrak bagi hasil Reference: Dr, R. C. (2021, january 2). Memahami Cost Recovery dan Gross Split dalam Kontrak Migas. Diambil kembali dari Hukum Online.com: https://www.hukumonline.com/klinik/a/memahami-i-cost-recovery-i-dan-i-gross-split-i-dalam-kontrak-migas-lt602a649c213ed Dwi Qurbani, I. (2012). Politik Hukum Pengelolaan Minyak dan Gas Bumi di Indonesia. Politik Hukum Pengelolaan Minyak dan Gas Bumi di Indonesia, 2-6. Hernandoko, A. M. (2018). Implikasi Berubahnya Kontrak Bagi Hasil (Product Sharing Contract) ke Kontrak Bagi Hasil Gross Split. Jurnal Privat Law, vol 2. Migas, D. (2017, februari 1). Kementrian ESDM. Diambil kembali dari Kementrian Energi dan Sumber daya Mineral: https://migas.esdm.go.id/post/read/permen-esdm-nomor-08-tahun-2017-tentang-kontrak-bagi-hasil-gross-split Peraturan dan Kebijakan Perundangan di Sektor Migas. (2020, januari 1). Diambil kembali dari EITI Indonesia: https://eiti.esdm.go.id/peraturan-kebijakan-perundangan-sektor-migas/ Potensi Minyak Dan Gas Di Indonesia Dan Kontribusinya Untuk Perekonomian. (2020, september 5). Diambil kembali dari Transcone Indonesia: https://transcon-indonesia.com/id/blog/potensi-minyak-dan-gas-di-indonesia-dan-kontribusinya-untuk-perekonomian Prinsip Utama Kebijakan Cost Recovery. (2010, februari 18). Diambil kembali dari ESDM.com: https://migas.esdm.go.id/post/read/Prinsip-Utama-Kebijakan-Cost-Recovery Putrohari, R. D. (2013, oktober 21). Peran Industri Migas di Indonesia. Diambil kembali dari Academia.edu: https://www.academia.edu/5513819/Peran_Industri_Migas_di_Indonesia Ramli nonci, A. F. (2020). Analisa deskripsi Minyak Bumi. jurnal penelitian dan perekonomian, 1-19. Romadhon, T. M. (2004). Peluang Bagi Penyelesaian Konflik Agraria Di Sub Sektor 1 Pertambangan Umum. Jurnal Analisis Sosial Vol. 9, 4-8. Utomo, L. T. (2016). Aspek Hukum Penerapan AsasKekuatan Mengikat dalam Kontrak Bagi Hasil Minyak dan Gas Bumi di Indonesia. ,Diponegoro Law Jurnal , 5, 4-10.

Identifikasi Lapisan Batubara Pada Batuan Sedimen Pre-Tersier Menggunakan Metode Wireline Logging Untuk Potensi Coalbed Methane (CBM) Pada Sumur AB Lapangan X Eko Prastio; Abdullah Rizky Agusman; Nur Fikriyah Mutmainah
Jurnal Bhara Petro Energi Vol.1 No.1 (Mei 2022)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/fadk7937

Wireline Logging is the activity of collecting and recording data on physical parameters according to the depth of the borehole during the drilling process. The measured data are radioactivity, speed of sound and electromagnetic. Methane gas trapped in coal or commonly referred to as Coalbed Methane is one of the alternative energy sources where the existing conventional gas has decreased production and no other new gas fields have been found. The Muara Enim Formation, which is the main target of mining companies, contains abundant brown coal or lignite from the South Sumatra region. The existing log data will be interpreted and evaluated qualitatively and identified the presence of the coal seam using wireline logging. Coalbed methane or CBM is an alternative energy source that can be utilized. The gas trapped in the coal seam will be utilized, because this research will identify the coal seam by using a wireline logging tool in well AB field X. Through the interpretation of logging results using gamma ray log data and density log data from several zones in the same location . Gamma ray log data and density logs will detect coal seams because there is a radioactive element in the coal, namely potassium. With a low gamma ray log value and a low density log value, it will be possible to have a coal seam in well AB field X.

Studi Pengaruh Kontaminasi Properti Rheology Water Based Mud di Lapangan Sunyu Abdullah Rizky Agusman
Jurnal Bhara Petro Energi Vol.1 No.2 (November 2022)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/daq4de76

This project focuses on Investigation of effect of contaminants on the Rheological Properties of Water-based Drilling Mud. For any drilling operation to be termed successful, care must be taken during the selection and application of the drilling fluid which are key factors that should be considered. Any actions contrary to carefully selection and application of drilling fluids could have very dire consequences. Based on the experiment work done on water base mud system to ascertain the effect of contaminants (salt, silica sand, cement and carbonate) on the rheological properties and performance of the mud, it shows that the presence of a contaminant on the drilling mud either reduces or increases the rheological properties of the mud system and in turn affects the rate of penetration, it performance and also poses serious drilling problems. It was observed that the presence of Sodium salt in the mud system increased the fluid loss into the formation. It was further observed that while Apparent Viscosity, Gel Strength increases as the mass increase from 1g to 5g, the pH and Plastic Viscosity almost did not change. The Yield point increases little. With Cement as contaminant, it shows all rheological properties of the mud increased markedly, as the quantity of the cement used is increased from 1g to 5g and the pH does not change. Silica contamination has not showed any marked effect on the nature of the drilling mud. In fact, the more the amount of the contaminant (Silica) is added, the closer it properties are to the blank sample that do not have contaminants. The carbonate effect is largely on the Gel strength which decreases as the amount of added carbonate increases. The pH has no charges, which also means carbonate keeps the mud in it alkaline state, as it was the case with cement.

Kebijakan Pemerintah Dalam Penentuan Kontrak Gross Split Sektor Minyak Dan Gas Di Indonesia Edy Soesanto; Abdullah Rizky Agusman; M. Mahlil Nasution; Siti Fadhillah
Jurnal Bhara Petro Energi Vol.2 No.1 (Mei 2023)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/zk7tkb71

As a solution to the problem of the Cost Recovery production sharing contract system, the Government of Indonesia through the Ministry of Energy and Mineral Resources issued Regulation of the Minister of Energy and Mineral Resources of the Republic of Indonesia Number 08 of 2017 concerning Gross Split Production Sharing Contracts. This new regulation is motivated by the low number and length of time it took for oil and gas reserves to be discovered, accompanied by Non-Tax State Revenue (PNBP) for the upstream oil and gas sector which continues to decline. The Gross Split production sharing contract scheme also offers a reduction in bureaucracy in investing which is expected to attract investors to carry out exploration and exploitation in Indonesia. This study aims to analyze the legal principles related to Gross Split regulations in the aspect of improving the investment climate for upstream oil and gas and analyze the new role of the Oil and Gas Special Task Force as an institution appointed by the state to exercise control and supervision of the activities of Cooperation Contract Contractors in Sharing Contracts.

Analisis Penjualan Produk Aspal Kilang Minyak Pertamina RU IV Cilacap Dengan Metode Statistik Aly Rasyid; Abdullah Rizky Agusman; Angellita Meisya Dellila
Jurnal Bhara Petro Energi Vol.2 No.2 (November 2023)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/zgx01f63

The development of road infrastructure such as highways, toll roads, airports, ports, bridges and other infrastructure requires an average of 1.2 million tons of asphalt per year. Under these conditions, the need for domestic asphalt is very large. Asphalt products are one of the petroleum derivative products that have high economic value and are the main raw material in infrastructure development. This research focuses on Pertamina RU IV Cilacap Oil Refinery Asphalt products with 60/70 penetration specifications that have been adapted to the needs and conditions of Indonesia with a tropical climate and are one of the superior products at PT Patra Trading. The purpose of this study is to analyze the simultaneous and partial significant effects using quantitative methods, namely statistical models on SPSS software version 25.0. The parameters used as research variables in the questionnaire to support this research are product excellence, product application, and product quality. Product excellence is a factor that makes a product have value and advantages in the eyes of customers, product application is the process of using products to meet customer needs, and product quality is the ability of a product to meet specifications to increase customer satisfaction. The results showed that the variables of product excellence X1 and product application X2 had a simultaneous effect on the product quality parameter Y based on the F (Simultaneous) test which serves to measure the goodness of fit of the regression equation or determine whether all the independent variables contained in the equation jointly affect the dependent variable by producing a significance value of 0.00 <0.05. Based on the T test (Partial) which serves to test how far the influence of one independent variable individually in explaining the variation in the dependent variable by producing a T-count value of 8.157> T-table 2.02 with a significant level of 0.000 < 0.05 or a significant value smaller than 0, 05 which indicates that there is a significant and partial influence on the Product Excellence variable X1 on Product Quality Y and T-count 6,528> T-table 2.02 with a significant level of 0.000 <0.05 or a significant value smaller than 0.05 there is a significant and partial influence on the Product Application variable X2 on Product Quality Y. Based on the coefficient of determination test which serves to measure how much variation in the independent variable can explain the dependent variable which shows the independent variable Product Excellence X1 and Product Application X2 affect the dependent variable Product Quality by 91.9%.

Identifikasi Kesehatan dan Keselamatan Kerja (K3)Pada SPBE PTD dengan Menggunakan MetodeJob Safety Analysis (JSA) Ildhan Rephi Al Razy; Edy Soesanto; Abdullah Rizky Agusman
Jurnal Bhara Petro Energi Vol.2 No.2 (November 2023)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/ns56ew69

In the operational activities of the oil and gas industry (oil and gas), Occupational Health and Safety (OHS) is very important. Workers in the oil and gas industry have a great potential risk to occupational health and safety conditions. Companies are required to implement an Occupational Health and Safety system to achieve the goal of zero accident industrial operations. Zero accident is a key factor in managing occupational safety and health (OHS). This research focuses on identifying hazards to the interaction between workers, officers/employees, tools and the environment with research indicators namely Human error, not using PPE, technical accidents. The purpose of this study was to determine employee awareness of Occupational Safety and Health (K3) at SPBE PTD and to determine Job Safety Analysis at SPBE PTD in order to create zero accidents with descriptive qualitative methods using Job Safety Analysis (JSA). The results showed that the total average indicator assessment had a value of 2.318, the total average accident in 2020 had a value of 0.833, the total average accident in 2021 had a value of 0.722, and the total average accident in 2022 had a value of 0.833. From the results of the total average value, it can be interpreted that the PTD SPBE does not have zero accidents.

Analisis Swelling Clay di Formasi Telisa Untuk Perencanaan Lumpur Pemboran Skala Laboratorium Nugroho Marsiyanto; Abdullah Rizky Agusman; Faqqih Badruzzaman
Jurnal Bhara Petro Energi Vol.2 No.2 (November 2023)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/bmfac267

In the exploration stage, there is a well drilling operation process aimed at making holes in locations identified as having oil/gas. At the time of the drilling, it does not always run well so that it can cause problems that interfere with drilling operations such as swelling clay, sloughing shale, caving shale, and differential pipe sticking which may be due to the formation lithology penetrating thick shale formations, so that these problems can slow the penetration rate and increase the cost of drilling operations. Then the swelling clay analysis was carried out to overcome this problem. This study aims to determine the reactivity of cuttings by identifying the clay content in the Telisa Formation and planning the drilling mud to be used, so that it is suitable if it penetrates the Telisa Formation so that clay Swelling does not occur. There are 3 different types of water base mud, namely 7% KCL Polymer PHPA, 7% KCL Polymer Polyamine, and 7% KCL Polymer Soltex. This method is carried out in a laboratory test by conducting several Density, Yield Point, Plastic Viscosity, Gel Strength, MBT (Methylene Blue Test) and LSM (Linear Swelling Meter) tests. The results of the 7% KCl Polymer PHPA mud test were Density 9.9 ppg, Plastic Viscosity 20 cp, Yield Point 18 lb/100 ft2, MBT 15 meq, and LSM 29.5 meq/100 gr. In the 7% KCl Polymer Polyamine mud test, namely Density 9.8 ppg, Plastic Viscosity 19 cp, Yield Point 18 lb/100 ft2, MBT 12.5 meq, and LSM 24.375 meq/100 gr. In the 7% KCl Polymer Soltex mud test, namely Density 9.7 ppg, Plastic Viscosity 20 cp, Yield Point 17 lb/100 ft2, MBT 10 meq and LSM 19.5 meq/100 gr. There are different values on the properties of the mud in each test using 3 different types of additives.

Analisa Sebaran Lapisan Sedimentasi Karbonate Berdasarkan Hasil Index Properties Akbar Tri Gumilang; Edy Soesanto; Abdullah Rizky Agusman
Jurnal Bhara Petro Energi Vol.3 No.1 (Mei 2024)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/w1c3ae87

This island is a sub-district located east of Pulau Laut at position 3° 24′ 23″ N o r t h Latitude and 116° 24′ 21″ East Longitude. The research location can be reached in 10 hours by road from Banjarmasin to Batulicin Ferry Port, the coast to Pulau Laut using the ferry for 2 hours arriving at Tanjung Serdang Port, followed by a land trip on Pulau Laut to Teluk Gosong Pier for 2 hours, the port by speedboat to arrive at Tanjung Nusantara Pier on Sebuku Island. Sebuku Island is included in the geological map of the 1812 Kotabaru Sheet, according to Rustandi (1995) there are four rock formations that make up Sebuku Island, among others (old to young); Ultrabasic Mesozoic Formation, Pitap Formation, Haruyan Formation, Tanjung Formation, and alluvium quaternary deposits. The Pitap Formation is of late Cretaceous age, deposited in a shallow marine environment, with a fairly wide distribution area. Its lithology consists of alternating conglomerates. The total weight of the sample is a factor that influences a carbonate percentage calculation. Water content is a factor that influences a calculated value.

Pengaruh Build Up Angle Untuk Kestabilan Formasi Pada Proses Cabut Rangkaian BHA Abdullah Rizky Agusman; Eko Prastio; Muhammad Alfarizi
Jurnal Bhara Petro Energi Vol.3 No.2 (November 2024)
Publisher : Fakultas Teknik Universitas Bhayangkara Jakarta Raya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31599/sskr0234

Directional drilling is a method for directing a drilled well along a predetermined path to reach the target. Vertical wells are usually defined as wells with a slope below 5°. Wells with a slope of more than 60° are also called directional wells.Directional drilling is only carried out for certain reasons and circumstances. The reasons for carrying out directional drilling are geographical reasons, geological reasons, and other reasons related to productivity issues.In this thesis the author tries to determine the KOP, azimuth, inclination and EOB points so that the process of extracting the BHA series can run smoothly without having to experience formation collapse or the BHA series being pinched in the formation in the MAR-1 well, followed by comparing the actual data.

Title

Found 12 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 12 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 12 Documents
Search