Claim Missing Document
Check
Articles

Found 7 Documents
Search

SENSITIVITAS USAHA PERIKANAN GILLNET DI KOTA TEGAL, PROVINSI JAWA TENGAH (Sensitivity of Gillnet Fisheries in Tegal City, Central Java Province) Prabowo Prabowo; Eko Sri Wiyono; John Haluan; Budhi Hascaryo Iskandar
Buletin PSP Vol. 20 No. 2 (2012): Buletin PSP
Publisher : Institut Pertanian Bogor

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (302.04 KB)

Abstract

Badan Pusat Statistik (2008) menyatakan hanya sekitar 13% usaha skala kecil yang mampu mengakses pembiayaan dari perbankan, dan usaha perikanan skala kecil termasuk gillnet merupakan yang paling rendah. Hal ini karena pengelolaan usaha yang belum baik terutama dari aspek kelayakan finansial dan pengalokasian faktor produksi yang dibutuhkandalam operasi penangkapan ikan. Penelitian ini bertujuan untuk menganalisis sensitivitas kelayakan usaha dan faktor produksi signifikan dalam operasi perikanan gillnet. Hasil analisis menunjukkan usaha perikanan gillnet di Kota Tegal mempunyai Nilai NPV, Net B/C, IRR, dan ROI berturut-turut Rp 1.993.457.657, 72, 1,09, 75,64%, dan 51,74, sehingga layakdikembangkan dan mendapatkan dukungan pembiayaan. Usaha perikanan gillnet sensitif terhadap penurunan penerimaan (Rp 3.845.549.000 per tahun) hingga 6,9%, peningkatan semua kebutuhan operasional (Rp 2.991.750.000 per tahun) hingga 21,7%, dan peningkatan kebutuhan solar (Rp 1.323.000.000 per tahun) hingga 49,1%. Ukuran jaring, lama trip, stock BBM, stock es, anak buah kapal (ABK), stock air tawar, dan perbekalan signifikan (sig < 0,05) mempengaruhi produksi ikan pada perikanan gillnet di Kota Tegal. Ada kecenderungan produksi ikan meningkat dengan bertambahnya panjang gillnet, stock BBM, stock es, danjumlah ABK yang ikut serta, sedangkan penambahan trip operasi, stock air tawar dan perbekalan tidak menyebabkan peningkatan.Kata kunci: faktor produksi, kelayakan, sensitivitas, dan signifikan
Kinerja Pembiayaan Perikanan Skala Kecil di Kota Tegal, Provinsi Jawa Tengah (Performance of Small Scale Fisheries Financing in Tegal City, Central Java Province) Prabowo Prabowo; Eko Sri Wiyono; John Haluan; Budhi Hascaryo Iskandar
Marine Fisheries : Journal of Marine Fisheries Technology and Management Vol. 4 No. 1 (2013): Marine Fisheries: Jurnal Teknologi dan Manajemen Perikanan Laut
Publisher : Bogor Agricultural University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (281.445 KB) | DOI: 10.29244/jmf.4.1.1-9

Abstract

Usaha perikanan skala kecil yang dikelola oleh masyarakat pesisir termasuk yang paling kecil mengakses kredit atau pembiayaan perbankan, padahal jumlah usaha skala kecil pada bidang perikanan ini cukup besar, yaitu mencapai 26,2 juta unit.  Kondisi ini tidak lepas dari belum efektifnya interaksi stakeholders dan komponen terkait dalam mendukung kinerja pembiayaan perikanan. Penelitian ini bertujuan untuk menganalisis interaksi komponen pembiayaan yang signifikan mempengaruhi kinerja pembiayaan perikanan skala kecil di Kota Tegal.  Penelitian ini menggunakan metode structural equation modeling (SEM). Hasil analisis menunjukkan peran lembaga perbankan signifikan mempengaruhi naik-turunnya kinerja pembiayaan, sedangkan kebijakan politik, performance usaha perikanan skala kecil, dan peran lembaga pemerintah tidak signifikan. Pada tataran teknis, penyaluran kredit/pembiayaan oleh bank umum (BRI dan BPD) secara signifikan mendukung peran lembaga perbankan dan dapat meningkatkan kinerja pembiayaan, sedangkan BPR belum. Terkait jenis kredit/pembiayaan, yang siginfikan dirasakan manfaatnya oleh nelayan kecil adalah kredit ketahanan pangan dan energi (KKPE), sedangkan kredit usaha kecil (KUR) dan bantuan pinjaman langsung masyarakat (BPLM) belum signifikan dirasakan manfaatnya meningkatkan pembiayaan perikanan skala kecil Kota Tegal. Program penyuluhan, bimbingan teknis, dan pendampingan oleh Kementerian Kelautan dan Perikanan Republik Indonesia (KKP RI)signifikan membantu peningkatan kinerja pembiayaan perikanan skala kecil di Kota Tegal. Nilai Net B/C, IRR, dan ROI yang baik signifikan dapat meningkatkan produktivitas dan kinerja pembiayaan perikanan skala kecil, sedangkan nilai NPV tidak.Kata kunci:pembiayaan, kinerja, signifikan, perikananan skala kecil
Massa Kalsium dan Massa Protein Daging Akibat Penggunaan Tepung Limbah Wortel (Daucus Carota L) dalam Ransum Ayam Broiler Prabowo Prabowo; L.D. Mahfudz; U. Atmomarsono
Jurnal Sain Peternakan Indonesia Vol 14, No 2 (2019)
Publisher : Universitas Bengkulu

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (277.629 KB) | DOI: 10.31186/jspi.id.14.2.201-207

Abstract

Penelitian ini bertujuan untuk mengkajii efek pemberian  tepung  limbah wortel (Daucus carota. L) terhadap  massa protein dan kalsium daging ayam broiler. Manfaat dari penelitian ini dapat memberikan informasi tentang pemanfaatan tepung  limbah wortel sebagai pakan ayam broiler. Materi yang digunakan adalah 144 ayam broiler (umur 7 hari) dengan rata- rata bobot badan awal 181,40 ± 11,31 g. Penelitian ini menggunakan rancangan acak lengkap (RAL) dengan 4 perlakuan dan 6 ulangan, masing - masing unit percobaan terdiri dari  6 ekor ayam. Perlakuan yaitu pemberian  tepung  limbah wortel pada tingkat T0 (0%), T1 (2%), T2 (4%), dan T3 (6%). Parameter yang diukur adalah, massa protein dan kalsium daging. Data dianalisis secara statistik dengan analisis varians dan dilanjutkan uji Duncan bila terdapat perlakuan yang  signifikan. Hasil penelitian menunjukkan bahwa pemberian tepung limbah wortel ke dalam ransum dapat menurunkan massa daging protein, sedangkan massa kalsium daging  tidak berpengaruh signifikan, kesimpulan adalah pemberian tepung limbah wortel dalam ransum  tidak boleh lebih dari 2%Kata kunci: ayam broiler; tepung limbah wortel; ?- caroten; massa protein dan massa kalsium daging
Pemodelan Solidifikasi untuk Proses Pembekuan Air dengan Geometri Cetakan Es Bujur Sangkar dan Persegi Panjang Andreas Pujianto; Prabowo Prabowo; Sigit Deddy P. Sidhi
Jurnal Airaha Vol 5 No 2: Desember 2016
Publisher : Politeknik Kelautan dan Perikanan Sorong, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (468.252 KB) | DOI: 10.15578/ja.v5i2.28

Abstract

Numerical study is presented concerning transient solidification for water freezing process. The ice can produces 25 kg of ice block product is used as model in this study. 2D-simpllified geometry of ice can is modeled with square and rectangular shape which have different aspect ratio (H/L) 1 and 0.62 respectively. Both of shapes is compared one to another based on heat transfer and duration of solidification. Boundary conditions use isothermal temperature walls. Three walls (top, bottom, and right) have the same temperature values are -8℃ and the left wall temperature value is 0℃. Second order implicit URANS equations were solved with laminar model in numerical calculation. Most of internal heat energy (latent and sensible) from the water released to the walls which have lower temperature than other wall for 15 hours cooling process. This condition makes temperature of the liquid water decrease and phase change occured. The rectangular shape perform better than the square shape in heat transfer of internal heat energy from the water to the walls shape. The top and bottom wall from rectangular shape have greater value of heat transfer because their area are larger than other walls. Solidification process of the water in the rectangular shape faster 7,03% than square which showed by growth of water solid fraction in time of 15 hours cooling process.
Pelatihan Teknik Menulis Copywriting Melalui di Media Sosial Untuk Meningkatkan Daya Tarik Calon Pelanggan Produk UMKM Di Rt 03 Rw 06 Kelurahan Yosodadi Iswati Iswati; Heri Cahyono; Sujino Sujino; Prabowo Prabowo; Majmuatur Rosail; Desti Amelia; Nur Azizah; Siwi Asabilul Wahidah; Isa Alawi
Cakrawala: Jurnal Pengabdian Masyarakat Global Vol. 2 No. 4 (2023): Cakrawala: Jurnal Pengabdian Masyarakat Global
Publisher : Universitas 45 Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30640/cakrawala.v2i4.1831

Abstract

This service aims to increase the attractiveness of potential customers for MSME products in RT 03 RW 06 Yosodadi Village through training in copywriting techniques on social media. Effective copywriting is the key to introducing products persuasively and building engagement with consumers. The training participants involved participants from MSME actors in the RT. The training method involves theory and practice sessions, with a focus on copywriting strategies that suit the characteristics of social media. In addition, monitoring and evaluation of training results is carried out to measure increases in product attractiveness and interaction on social media. It is hoped that the results of this research can make a positive contribution in strengthening the branding and marketing of MSME products at the local level, creating sustainable business opportunities, and providing economic benefits for the community in RT 03 RW 06, Yosodadi Village. The training method implemented involves a participatory approach, where training participants are actively involved in the learning process and developing copywriting strategies. In addition, an analysis of local market characteristics and potential customers' preferences is carried out to adapt the copywriting approach to their needs and desires. This training also provides participants with an understanding of the use of social media as an effective platform for building networks and increasing product visibility. The training material includes techniques for writing attractive titles, using relevant images, and applying persuasive language. Evaluation is carried out through monitoring online interactions, the number of content shares, and the increase in the number of followers or likes. It is hoped that the results of this training can make a positive contribution to increasing sales and popularity of MSME products in the RT 03 RW 06 environment. As an effort to empower the local economy, this research is expected to be able to provide insight to MSME players regarding effective marketing strategies in the digital era, as well as encourage collaboration between MSME actors in increasing the competitiveness of local products in the wider market.
OPTIMIZATION OF MEASUREMENT SPEED FOR SPECTRAL GAMMA RAY AND CLAY MINERAL IDENTIFICATION irawan Y. Tribuana; Ade Yogi; Prabowo Prabowo; Andy S. Wibowo; Puteri Sudija; Yudhi Durahman
Scientific Contributions Oil and Gas Vol. 38 No. 3 (2015): SCOG
Publisher : Testing Center for Oil and Gas LEMIGAS

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29017/scog.38.3.244

Abstract

Gamma ray log is a logging tool to capture the radioactive level of a rock or formation measured in API units. This logging tool generally has a capability to differentiate between permeable and impermeable layers. Usually the impermeable layer tends to have higher radioactivity compared to the permeable one except for the feldspar bearing formation. In addition, another capability of this logging tool is to determine the kind of clay mineral, by using ratio data between Thorium and Potassium. This laboratory experiment used Spectral Gamma Ray (SGR) equipment at LEMIGAS Routine Core Laboratory. The quality of gamma ray log measurement is significantly affected by the speed of the conveyor belt. During the experiment, the measurement speed of 30 m/hour is the optimum speed to achieve good quality data and time efficiency with the data amount of 169 points/meter. The result of SGR measurement gives the reading on the content of Uranium, Thorium and Potassium. The Thorium and Potassium content are compared and plotted in Quirein graphic which was modified by Schlumberger in 1985. Using this crossplot, we can identify the presence of Chlorite, Montmorillonite, Kaolinite, Illite, mixed layer Feldspar, Mica, and Glauconite minerals. A case study conducted on Wells A1, A2, A3 and A4, indicated that the result of this crossplot were similar to the measurement using XRD.
Motivasi Santri dalam Menghafal Al-Qur’an di Pondok Pesantren Berbasis Kitab Kuning Prabowo Prabowo
IHSANIKA : Jurnal Pendidikan Agama Islam Vol. 2 No. 4 (2024): Desember : IHSANIKA : Jurnal Pendidikan Agama Islam
Publisher : STIKes Ibnu Sina Ajibarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59841/ihsanika.v2i4.1954

Abstract

Memorizing the Qur'an is an activity that is not easy to do. It takes a long time, extra energy and thought and high motivation. Especially if someone memorizes the Qur'an in a yellow book-based boarding school will have many activities to follow and many obstacles to face. Therefore, everyone who memorizes the Qur'an has intrinsic and extrinsic motivation. This motivation helps students to finish their memorization quickly with good memorization quality without leaving other activities. This study aims to determine the motivation of students in memorizing the Qur'an in yellow book-based Islamic boarding schools. This type of research is qualitative research with a case study approach. This research was conducted at the Haji Ya'qub Islamic Boarding School which is one of the units of the Lirboyo Islamic Boarding School. Data collection techniques were conducted through interviews, observation, and documentation. By using data analysis using data reduction, data presentation, and conclusion drawing. The results of this study include: 1) Motivation that arises from the students themselves (intrinsic motivation) owned by students in memorizing the Qur'an, namely: a. Desire to become a memorizer of the Qur'an, b. Get closer to Allah, c. Complete knowledge, and d. Make parents happy. Make both parents happy. 2) Motivation that will function due to external stimuli (Extrinsic motivation) owned by students in memorizing the Qur'an, namely: a. Encouragement from the family, especially both parents and 2) encouragement from the ustadz or mualim tahfidz.