Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Jurnal Pengelolaan Laboratorium Pendidikan

Uji Performa Alat Vakum Tekan Termodifikasi Untuk Impregnasi Kayu Esti Prihatini; Rohmat Ismail; Istie Sekartining Rahayu; Rizky Ramdhani
Jurnal Pengelolaan Laboratorium Pendidikan Vol.5, No.2, Juli 2023
Publisher : UPT Laboratorium Terpadu, Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/jplp.5.2.75-82

Abstract

The impregnation process is carried out to increase the resistance of wood from the attack of microorganisms such as fungi and termite attacks by placing the wood in a vacuum tube and then placing an impregnan solution into it. The limited ability of impregnation tubes is an obstacle in carrying out research and practicum activities, therefore there needs to be modifications to the impregnation tube so that the impregnation process can provide better results. Verification of the results of impregnation is done by calculating the value of weight percent gain (WPG) and relative standard deviation (%RSD) for the test of the level of appreciation. Based on the results of the experiment the highest %WPG value in the water impregnan solution was obtained from the parameter conditions of the type 3 press vacuum tool, which is with a time of 1 hour and a pressure of 5 bars and is worth (178.29±10.97). The highest %WPG value in boron solution of 5% is obtained from the condition of the type 6 press vacuum tool with a time of 3 hours and a pressure of 5 bars and is worth (5.16±0.45). The smallest %RSD value of water impregnan solution is achieved under the parameter conditions of type 4 tools at 3 hours and pressure 1 bar and is worth 3.99%. The smallest %RSD value of boron impregnan solution is 5% achieved under the parameter conditions of type 2 tools, namely within 1 hour and pressure of 3 bars and is worth 5.36%.
Pengembangan Sistem Alat Ukur Sudut Kontak dengan Metode Optical Contact Angle Prihatini, Esti; Ismail, Rohmat; Rahayu, Istie Sekartining; Saputri, Egy Dia
Jurnal Pengelolaan Laboratorium Pendidikan Vol.6, No.1, Januari 2024
Publisher : UPT Laboratorium Terpadu, Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/jplp.6.1.8-16

Abstract

Penelitian ini bertujuan untuk mengembangkan sistem alat pengukur sudut kontak yang merupakan salah satu metode penentuan karakteristik permukaan material kayu. Data analisis yang dihasilkan oleh sistem alat yang sudah purwa rupa ini, berupa citra digital berbentuk video lalu dipotong pada kelipatan 10 detik dengan perangkat lunak GOM Player. Sudut kontak dari setiap potongan gambar tersebut kemudian diukur dengan menggunakan aplikasi Image J dan diambil data nilai sudut kontak pada detik ke 100, 200 dan 300 dengan 7 kali ulangan, lalu ditentukan nilai %RSD untuk menentukan tingkat kepresisiannya. Hasil pengolahan data sudut kontak secara statistik menunjukan tingkat presisi yang baik. Hal tersebut dapat dilihat dari hasil pengukuran sudut kontak cairan finishing pada kayu mahoni yaitu  (46,379 ±1,728)O dengan nilai RSD sebesar 3,73%  pada waktu pengambilan gambar 100 detik, ( 45,335±1,930)O dengan nilai RSD sebesar 4,26% pada waktu pengambilan gambar 200 detik dan (44,198±1,170)O dengan nilai RSD sebesar 2,65 % pada waktu pengambilan gambar 300 detik. Pengukuran sudut kontak yang presisi menjadi hal penting untuk akurasi penentuan karakteristik material yaitu tingkat keterbasahan, hidrofobisitas, dan tegangan permukaan serta aplikasinya yang luas di bidang pendidikan, penelitian dan industri.