Claim Missing Document
Check
Articles

Found 5 Documents
Search

Pengaruh Struktur Modal dan Struktur Aset Terhadap Nilai Perusahaan Pada Perusahaan Asuransi Yang Terdaftar di Bursa Efek Indonesia (BEI) Tahun 2016-2020 Mahendra, Yusril Iza; Maliah, Maliah; Mursalin, Mursalin
Jurnal Media Wahana Ekonomika Vol. 20 No. 3 (2023): Jurnal Media Wahana Ekonomika, Oktober 2023
Publisher : Universitas PGRI Palembang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31851/jmwe.v20i3.13502

Abstract

ABSTRAK Penelitian ini bertujuan untuk melihat terpengaruhnya struktur modal dan struktur aset secara semuanya pada nilai perusahaan pada perusahaan asuransi BEI. Populasi semua perusahaan asuransi konvensional. Teknik pengambilan 11 sampel memakai sampel jenuh. Pada penelitian ini menggunakan kuantitatif. Teknik pengumpulan data pendekatan dokumentasi dan kepustakaan. analisa data analisis statistik deskriptif. Berdasarkan uji hipotesis dapat disimpulkan secara keseluruhan X1 mempengaruhi nilai pada PT assurance X2 tidak terdapat pengaruh pada terhadap Y. Secara parsial maupun simultan terdapat pengaruh struktur modal dan struktur aset terhadap nilai perusahaan pada perusahaan asuransi di Bursa Efek Indonesia periode 2016-2020. Besarnya pengaruh variabel bebas (struktur modal dan truktur aset) terhadap terikat (nilai perusahaan) adalah 61%. Kata Kunci: struktur modal, sruktur aset, nilai perusahaan. ABSTRACT This study aims to see the effect of capital structure and asset structure on the firm value of the IDX insurance company. The population of all conventional insurance companies. The technique for taking 11 samples used saturated samples. In this study using quantitative. Data collection techniques approach documentation and literature. data analysis descriptive statistical analysis. Based on the hypothesis test, it can be concluded that overall X1 affects the value of PT assurance. X2 has no effect on Y. Partially or simultaneously there is an effect of capital structure and asset structure on firm value in insurance companies on the Indonesia Stock Exchange for the 2016-2020 period. The magnitude of the influence of the independent variables (capital structure and asset structure) on the bound (firm value) is 61%. Keywords: capital structure, asset structure, firm value.
PEMBUATAN BATU BATA RINGAN DARI SAMPAH PLASTIK DAN CAMPURAN FLY-ASH SEBAGAI BENTUK PENGELOLAAN SAMPAH DI DESA WISATA BONJERUK Anang Fakhrrurahman; Kumala, Malya; Rosalia, Lutfiah Ayu; Siptiani, Eka; Ambarwati, Zaskia Putri; Hamsy, Lalang Setiawan; Setiawan, Yahya; Sari, Mauliya Alina; Jannah, Rafaatul; Misrohatun, Misrohatun; Mahendra, Yusril Iza; Ngudiyono, Ngudiyono
Jurnal Wicara Vol 3 No 2 (2025): Jurnal Wicara Desa
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/wicara.v3i2.6768

Abstract

The Community Service Program (KKN) of Mataram University in Bonjeruk Village aims to address the issue of plastic waste management by educating the community on utilizing waste into economically valuable products. One of the proposed solutions is training in the production of lightweight bricks made from plastic waste mixed with fly ash from the Jeranjang Steam Power Plant (PLTU Jeranjang). The activities are carried out through a participatory approach, involving the community in various stages, including an initial survey, socialization, training, mentoring, as well as documentation and publication. The brick-making process includes burning plastic waste, mixing it with fly ash and used oil, molding, cooling, and drying before it is ready for use. The results of this program indicate that processing plastic waste into lightweight bricks can be an innovative and sustainable solution for reducing waste while also providing economic opportunities for the people of Bonjeruk Village.
Evaluasi Kritis Proses Produksi Gula Aren Melalui Pendekatan FMEA – Risk Matrix Azzumardi, Nispi; Hidayat, Ananda Syalsabila; Mahendra, Yusril Iza
JATI UNIK : Jurnal Ilmiah Teknik dan Manajemen Industri Vol. 9 No. 1 (2025): October
Publisher : Industrial Engineering, Engineering of Faculty, Universitas Kadiri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jatiunik.v9i1.6852

Abstract

Traditional palm sugar production faces various risks such as material contamination, occupational accidents, and procedural inconsistencies that reduce product quality and production safety. Indonesia’s national sugar trade deficit reached 5 million tons in 2023, highlighting the urgent need for risk mitigation in this sector. This study aims to identify, measure, and prioritize risks across 22 stages of the palm sugar production process using the FMEA–Risk Matrix approach, supported by mitigation strategies focused on occupational safety and product quality. A descriptive research method was applied through field observations and interviews. Each potential risk was evaluated using Severity, Occurrence, and Detection scores and then mapped using the Risk Matrix. The analysis identified five main risks, with the highest RPN found in the risk of animal or ant bites (R4 = 175), followed by injury from cutting tools (R5 = 112) and falling from trees (R3 = 96). Most risks were categorized as medium (45%), followed by low (39%) and high (16%). The most dominant mitigation efforts (61%) included routine container cleaning, use of heat-resistant clothing and Kevlar gloves during cooking, and daily monitoring of PPE compliance with a minimum target of 90%. This integrated approach effectively identifies and prioritizes risks in palm sugar production, while enhancing worker safety and product quality. The use of heat-resistant PPE and hygienic procedures has been proven to significantly reduce burn injuries and material contamination. This study expands the application of industrial risk management to traditional agroindustry, offering a measurable mitigation model for palm sugar production and supporting efficiency and sustainability in the national sugar supply chain.
PEMBUATAN BATU BATA RINGAN DARI SAMPAH PLASTIK DAN CAMPURAN FLY-ASH SEBAGAI BENTUK PENGELOLAAN SAMPAH DI DESA WISATA BONJERUK Anang Fakhrrurahman; Kumala, Malya; Rosalia, Lutfiah Ayu; Siptiani, Eka; Ambarwati, Zaskia Putri; Hamsy, Lalang Setiawan; Setiawan, Yahya; Sari, Mauliya Alina; Jannah, Rafaatul; Misrohatun, Misrohatun; Mahendra, Yusril Iza; Ngudiyono, Ngudiyono
Jurnal Wicara Vol 3 No 2 (2025): Jurnal Wicara Desa
Publisher : Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29303/wicara.v3i2.6768

Abstract

The Community Service Program (KKN) of Mataram University in Bonjeruk Village aims to address the issue of plastic waste management by educating the community on utilizing waste into economically valuable products. One of the proposed solutions is training in the production of lightweight bricks made from plastic waste mixed with fly ash from the Jeranjang Steam Power Plant (PLTU Jeranjang). The activities are carried out through a participatory approach, involving the community in various stages, including an initial survey, socialization, training, mentoring, as well as documentation and publication. The brick-making process includes burning plastic waste, mixing it with fly ash and used oil, molding, cooling, and drying before it is ready for use. The results of this program indicate that processing plastic waste into lightweight bricks can be an innovative and sustainable solution for reducing waste while also providing economic opportunities for the people of Bonjeruk Village.
Analisis pengaruh stress kerja terhadap ojek online di Kota Medan Mahendra, Yusril Iza; Setiawan, Dimas; Fawwazir, Abdan Habib; Ratna, Dewi; Zahra, Meuthia Ulyna
Nautical : Jurnal Ilmiah Multidisiplin Indonesia Vol. 1 No. 5 (2022): Nautical : Jurnal Ilmiah Multidisiplin
Publisher : ARKA INSTITUTE

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55904/nautical.v1i5.293

Abstract

Transportasi adalah kendaraan yang digunakan masyarakat untuk memperlancar aktivitas sehari-hari. Setiap orang membutuhkan transportasi dalam berbagai kegiatannya seperti bekerja, bersekolah, bepergian maupun aktivitas lainnya. Tujuan dari penelitian ini adalah untuk mengetahui stres kerja terhadap ojek online di Kota Medan. Penelitian ini menggunakan pendekatan penelitian kuantitatif dan berfokus pada penentuan kausalitas. Metode pengambilan sampel dalam penelitian ini dilakukan dengan cara random sampling. Subyek survei pada penelitian ini adalah pengemudi ojek online hingga 600 pengemudi di Medan dengan jumlah Sampel terdiri dari 25 pengemudi ojek online. Data dikumpulkan dengan pertanyaan melalui teknik wawancara. Hasil penelitian menunjukkan bahwa tingkat stress ringan ada 3 (12%) responden, tingkat stress sedang 6 (24%) responden, normal 7 (28%) responden, tingkat stress berat ada 5 (20%) responden dan tingkat stress sangat berat 4 (16%) respon, dapat disimpulkan bahwa tingkat stress yang paling banyak dialami ojek online ialah normal