Article Per Year (5 Year)
p-Index From 2020 - 2025
0.562
P-Index
This Author published in this journals
All Journal Communications in Science and Technology Bulletin of Chemical Reaction Engineering & Catalysis
Vebryana, Marini Fairuz
Unknown Affiliation
Chemical Engineering, Chemistry & Bioengineering Chemistry Engineering

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 3 Documents
Search

 1 
Performance of Hydrothermally Prepared NiMo Dispersed on Sulfated Zirconia Nano-Catalyst in The Conversion of Used Palm Cooking Oil into Jet Fuel Range Bio-Hydrocarbons Wijaya, Karna; Saviola, Aldino Javier; Amin, Amalia Kurnia; Vebryana, Marini Fairuz; Bhagaskara, Adyatma; Ekawati, Hilda Anggita; Ramadhani, Saffana; Saputra, Dita Adi; Agustanhakri, Agustanhakri
Bulletin of Chemical Reaction Engineering & Catalysis 2024: BCREC Volume 19 Issue 2 Year 2024 (August 2024)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.20157

Abstract

Human efforts to overcome environmental problems from using fossil fuels continue, such as hydroconversion of biomass into bio-jet fuel. Research on producing a jet fuel range of bio-hydrocarbons from used palm cooking oil catalyzed by sulfated zirconia impregnated with nickel-molybdenum bimetal has been successfully conducted. The hydrothermal method synthesized the nano-catalyst material in the sulfation and impregnation processes. The hydroconversion process was carried out at atmospheric pressure and a temperature of 300–600 °C for 2 h with a hydrogen gas flow rate of 20 mL/min and a catalyst-to-feed ratio of 1:100 (wt%). Compared with zirconia and sulfated zirconia, NiMo-impregnated sulfated zirconia showed the best activity and selectivity in bio-jet fuel production with liquid product and selectivity of 61.07% and 43.49%, respectively. This catalyst also performed well in three consecutive runs, with bio-jet fuel selectivity in the second and third runs of 51.68% and 30.86%, respectively. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Fixing cobalt metal onto mordenite through spray impregnation and its evaluation as a catalyst in transforming used coconut cooking oil into bio-jet fuel Saviola, Aldino Javier; Wijaya, Karna; Syoufian, Akhmad; Vebryana, Marini Fairuz; Anggraeni, Widuri; Rozana, Kharistya; Darsono, Nono; Saputra, Dita Adi; Saputri, Wahyu Dita
Communications in Science and Technology Vol 9 No 2 (2024)
Publisher : Komunitas Ilmuwan dan Profesional Muslim Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21924/cst.9.2.2024.1535

Abstract

Given the challenges posed by fossil-based jet fuel, research into bio-jet fuel production has intensified to achieve carbon neutrality. The present work reports a significant breakthrough with the successful conversion of used coconut cooking oil into bio-jet fuel utilizing a cobalt-impregnated mordenite catalyst. Cobalt was introduced to mordenite via the spray impregnation method at a concentration of 2% using a CoCl?·6H?O solution. The resultant catalyst was characterized using FTIR, XRD, NH?-TPD, SAA, FESEM-EDX Mapping, TEM, XPS, and TG/DTA instruments. Hydrotreatment was conducted in a semi-batch reactor at atmospheric pressure, employing H? gas at a flow rate of 20 mL/min and a catalyst-to-feed ratio of 1:200 (w/w) for a duration of 2 h. The addition of cobalt significantly enhanced the efficiency of the hydrotreatment by improving the catalytic performance of mordenite as a support material. The liquid product conversion and total bio-jet fuel yield obtained from the hydrotreatment of used coconut cooking oil using the Co/mordenite catalyst were 60.25% and 51.11%, respectively. The highest selectivity for bio-jet fuel was observed in fraction II (450–550 °C) at 88.90%. This catalyst exhibited sustained performance over three consecutive runs, indicating its potential application in the future biofuel industry. Altogether, this research reveals the possibility of employing used coconut cooking oil as a sustainable and promising feedstock to be converted into bio-jet fuel by hydrodeoxygenation and/or hydrocracking reactions.
Sonochemically Modified Lapindo Mud Using Sulfuric Acid for Efficient Adsorption of Phenol in Aqueous Media and Real Wastewater Samples Wijaya, Karna; Bhagaskara, Adyatma; Sani, Maria Francia Mirabella; Vebryana, Marini Fairuz; Pratama, Fernando Alvaro; Anggraeni, Widuri; Amin, Amalia Kurnia; Ramadhani, Faturrahman Al; Saviola, Aldino Javier
Bulletin of Chemical Reaction Engineering & Catalysis 2024: BCREC Volume 19 Issue 4 Year 2024 (December 2024)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.20228

Abstract

Pharmaceutical industrial wastewater frequently contains high amounts of phenolic substances, which pose severe threats to the ecosystem and human health. Therefore, efficient removal of these pollutants is urgently needed. In the present work, sulfated Lapindo mud (SLM) was prepared using the sonochemical method and applied as an adsorbent for phenol removal in aqueous media and actual wastewater samples from Code River, Yogyakarta. Modification of Lapindo mud (LM) using sulfuric acid enables it to remove its impurities, resulting in a material containing 78.4% silica (SiO2) and 15.3% alumina (Al2O3). The SLM adsorbent demonstrated sufficient adsorption performance of 49.8% with an optimal initial phenol concentration of 120 mg/L with a contact time of 100 min at pH of 10. The maximum adsorption capacity (qmax) obtained by the Langmuir isotherm model was 27.2 mg/g. The adsorption process follows pseudo-second-order because it has two active sites, Brønsted acid sites (–SiOH and –SO3H) and Lewis acid sites (Si4+). Phenol in base condition undergoes a deprotonation reaction that is stabilized by the acid-active sites of the SLM adsorbent through intermolecular forces. Considering the large adsorption capacity and quick kinetic, the SLM adsorbent can be a promising cheap and green material to remove phenolic substances in wastewater, especially in the river near the medical facility. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Co-Authors Agustanhakri, Agustanhakri Akhmad Syoufian Amin, Amalia Kurnia Anggraeni, Widuri Bhagaskara, Adyatma Ekawati, Hilda Anggita Karna Wijaya Nono Darsono, Nono Pratama, Fernando Alvaro Ramadhani, Faturrahman Al Ramadhani, Saffana Rozana, Kharistya Sani, Maria Francia Mirabella Saputra, Dita Adi Saviola, Aldino Javier Wahyu Dita Saputri