Claim Missing Document
Check
Articles

Found 7 Documents
Search

Speed control of BLDC motor using PID controller Ramu, Tirunagari Bhargava; Cheerla, Sreevardhan; Kallakuta, Ravi Kumar; Mohan, Kaja Krishna; Inthiyaz, Syed; Prakash, Nelaturi Nanda; Rajanna, Bodapati Venkata; Kumar, Cheeli Ashok
International Journal of Applied Power Engineering (IJAPE) Vol 14, No 2: June 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v14.i2.pp401-411

Abstract

The current state of science, technology, and industrial revolutions did not occur overnight. Many years of empirical study attempts by human intelligence have led to the world's current status. As a result, new technologies and innovations would constantly propel human civilization forward. Another outstanding invention of the present day is the brushless DC (BLDC) motor. This paper outlines the design of a BLDC motor control system utilizing MATLAB/Simulink software. The main aim of this project is to control the speed and to obtain time domain specifications of PID controller. The application of speed control of motor is vast and also required to maintain the work efficient without any disturbance, the power consumption, and any other fuel to run. On the basis of this the brushless DC motor as application is selected because of reduction in losses and also the power. The PID control system is built to control the speed of the motor and gives the precise output. The universal bridge is used to amplify the current in the output of the application. PID controller reduces the error and increases the stability of the system.
Grid connected solar water pumping system Reddy, Mula Sreenivasa; Raja, Banda Srinivas; Kiranbabu, Movva Naga Venkata; Parvez, Muzammil; Inthiyaz, Syed; Prakash, Nelaturi Nanda; Rajanna, Bodapati Venkata; Surendher, Guntukala
International Journal of Applied Power Engineering (IJAPE) Vol 14, No 2: June 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v14.i2.pp412-420

Abstract

A grid-connected solar water pumping system (SWPS) uses solar power to pump water while simultaneously drawing power from the grid when necessary. These systems can benefit farmers in a variety of ways, including reliable power, lower electric bills, increased income, and improved economic viability. This study explores a solar photovoltaic (SPV) water pumping system designed to function with a single-phase distribution network. It utilizes an induction motor drive (IMD) and incorporates an advanced power-sharing technique for optimal performance. In addition to transferring power from SPV to IMD, a DC-DC boost converter functions as a grid interface and power factor adjustment device. Maximizing the power extracted from the SPV array is critical for optimizing its utilization. To do this, a control mechanism based on incremental conductance is implemented to track maximum power points. Simultaneously, the IMD connected to the power source inverter is regulated using a simple volt/frequency approach. The suggested system, which includes standalone, grid-interfaced, and mixed-mode situations, is developed and validated in a lab.
Solar-powered bidirectional charging of electric vehicle Karthik, Nachagari; Kallakunta, Ravi Kumar; Cheerla, Sreevardhan; Mohan, Kaja Krishna; Inthiyaz, Syed; Prakash, Nelaturi Nanda; Rajanna, Bodapati Venkata; Ahammad, Sk. Hasane
International Journal of Applied Power Engineering (IJAPE) Vol 14, No 2: June 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v14.i2.pp382-391

Abstract

Solar-powered bidirectional charging of an electric vehicle has three different modes of operation. The first mode of operation is “solar-powered electric vehicle charging” in which the vehicle is charged with solar energy. The second mode of operation is “grid-powered electric vehicle charging” which charges the vehicle in the absence of solar energy. The third mode of operation is “vehicle supplying to the grid” and in this mode, the vehicle energy is transferred back to the grid when there is demand to charge the other electric vehicles connected to the same grid. The system uses maximum power point tracking (MPPT) to improve power extraction from solar panels under standard test cell conditions, allowing for effective charging of electric cars. It also uses a proportional-integral (PI) controller to continually monitor the battery's state of charge (SOC). This controller modulates the duty cycle of pulse width modulation (PWM), which regulates the charging current. The charging system includes a buck-boost converter, which functions as a buck converter while supplying grid voltage to the vehicle, and a boost converter in supplying excess voltage of the vehicle to the grid. For three different modes of operation, the battery parameters such as voltage, current, and charging state are presented. The grid voltage and current are observed for the last two modes of operation.
Solar and battery input super boost DC–DC converter for solar powered electric vehicle Yadagiri, Aerpula; Talagadadeevi, Srinivasa Rao; Rao, Seetamraju Venkata Bala Subrahmanyeswara; Rao, Bitra Janardhana; Inthiyaz, Syed; Prakash, Nelaturi Nanda; Rajanna, Bodapati Venkata; Kumar, Cheeli Ashok
International Journal of Applied Power Engineering (IJAPE) Vol 14, No 2: June 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijape.v14.i2.pp479-487

Abstract

The electric vehicle (EV) is increasingly emerging as an attractive solution to reduce reliance on fossil fuels in India. In commercial EVs, solar photovoltaic (PV) technology is employed both to charge the battery and power the vehicle. However, the conventional bidirectional DC-DC converter layout results in underutilization of solar PV power when the battery's state of charge (SOC) reaches maximum capacity. This work offers a unique dual input super boost (DISB) DC-DC converter designed specifically for solar-powered electric vehicles (EVs) to address the aforementioned challenge. The recently suggested converter operates in six different modes to effectively capture solar photovoltaic (PV) power. Notable benefits of this design include a wide range of speed control and fewer conduction devices in each mode, which eventually result in increased overall efficiency. An extensive analysis of the suggested DISB DC-DC converter is carried out by the study, encompassing detailed examination of operating waveforms and dynamic evaluations. Furthermore, the converter's performance and operation under the six different modes are verified through simulation.
Design and development of AC motor speed controlling system using touch screen with over heat protection Rani, Prathipati Ratna Sudha; Eragamreddy, Gouthami; Inthiyaz, Syed; Ravikanth, Sivangi; Najumunnisa, Mohammad; Rajanna, Bodapati Venkata; Kumar, Cheeli Ashok; Ahammad, Shaik Hasane
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 16, No 4: December 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijpeds.v16.i4.pp2429-2440

Abstract

Design and implementation of an AC motor speed control and monitoring system based on a touch screen interface with built-in overheat protection, utilizing Arduino, meets the increasing demand for efficient, user-friendly motor control in many industrial applications. This system offers an easy-to-use interface to manage the speed of an AC motor, with real-time feedback and adjustments through a touch screen display. The system employs an Arduino microcontroller, which accepts inputs from the touch screen and processes these to regulate the motor's speed through a pulse width modulation (PWM) method. The system also has an overheat protection system, which it is able to monitor the temperature of the motor via a temperature sensor. When the motor reaches a predetermined temperature, the system automatically shuts off power to avoid damage. The intuitive touch screen facilitates convenient monitoring of motor parameters like temperature, giving a smooth experience to operators. The modular design of the system provides scalability across applications, ranging from household appliances to large industrial systems, with reliability, energy efficiency, and safety in motor-driven processes.
Bidirectional power converter for electrical vehicle with battery charging and smart battery management system Rajanna, Bodapati Venkata; Krishnaiah, Kondragunta Rama; Reddy, Ganta Raghotham; Ahammad, Shaik Hasane; Najumunnisa, Mohammad; Inthiyaz, Syed; Eragamreddy, Gouthami; Sudhakar, Ambarapu; Kolukula, Nitalaksheswara Rao
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 16, No 4: December 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/ijpeds.v16.i4.pp2592-2604

Abstract

In electric vehicles (EVs), efficient energy management is critical for reliable power transfer between the battery and motor. This paper presents the design and implementation of a bidirectional DC-DC converter equipped with a smart battery management system (BMS). The system supports bidirectional power flow, operating in boost mode during acceleration and buck mode during regenerative braking, thereby enhancing overall energy efficiency and vehicle performance. A PIC microcontroller governs the system, performing real-time monitoring of key battery parameters such as state of charge (SOC), state of health (SOH), voltage, and temperature. Safety features include automatic cooling fan activation when the temperature exceeds 45 °C and generator startup when battery voltage falls below 23 V. Real-time data is displayed via an LCD interface to improve user interaction and system transparency. The proposed system achieved a conversion efficiency of 90-93% during experimental testing, with stable switching, reliable automation, and effective thermal protection. The embedded energy management system optimizes charging and discharging cycles while preventing overcharging, deep discharge, and thermal stress. This intelligent, automated power converter enhances battery life, improves EV reliability, and contributes to sustainable transportation by enabling features like vehicle-to-grid (V2G) energy transfer. The proposed architecture is well-suited for integration into modern EV infrastructure. Although the system architecture supports future V2G integration, V2G functionality was not implemented or tested in the present experimental setup.
A high-efficiency transformerless buck-boost inverter with fuzzy logic control for grid-connected solar PV systems Venkata Rajanna, Bodapati; Rama Krishnaiah, Kondragunta; Ramaiah, Veerlapati; Ahammad, Shaik Hasane; Najumunnisa, Mohammad; Inthiyaz, Syed; Rao Kolukula, Nitalaksheswara; Sudhakar, Ambarapu
Bulletin of Electrical Engineering and Informatics Vol 14, No 6: December 2025
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/eei.v14i6.10752

Abstract

Transformerless inverters are increasingly favored in grid-connected photovoltaic (PV) systems due to their higher efficiency, reduced size, and lower cost. This paper presents a novel transformerless inverter topology that integrates buck boost conversion with an advanced fuzzy logic controller (FLC) to enhance energy extraction and power quality under dynamically changing solar conditions. The proposed system employs a sine triangle pulse width modulation (PWM) scheme in conjunction with the FLC to improve waveform quality and system responsiveness. By dynamically adapting to variations in irradiance and load, the control strategy reduces the total harmonic distortion (THD) from 36.51% to 1.51%, significantly enhancing compliance with international grid standards. Additionally, a novel grounding technique is implemented to mitigate common mode leakage currents, a typical issue in transformerless systems, without the need for galvanic isolation. Comprehensive MATLAB/Simulink simulations validate the inverter’s performance, demonstrating superior dynamic behavior, harmonic suppression, and overall reliability. The proposed architecture offers a compact, cost effective, and high performance solution for next generation grid integrated solar PV systems.