cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
,
INDONESIA
Civil Engineering Journal
Published by C.E.J Publishing Group
ISSN : 24763055     EISSN : 24763055     DOI : -
Core Subject : Engineering,
Civil Engineering Journal is a multidisciplinary, an open-access, internationally double-blind peer -reviewed journal concerned with all aspects of civil engineering, which include but are not necessarily restricted to: Building Materials and Structures, Coastal and Harbor Engineering, Constructions Technology, Constructions Management, Road and Bridge Engineering, Renovation of Buildings, Earthquake Engineering, Environmental Engineering, Geotechnical Engineering, Highway Engineering, Hydraulic and Hydraulic Structures, Structural Engineering, Surveying and Geo-Spatial Engineering, Transportation Engineering, Tunnel Engineering, Urban Engineering and Economy, Water Resources Engineering, Urban Drainage.
Arjuna Subject : -
Articles 2,041 Documents
Modified Ship on the X-Bow Designs Using MADM Selections: Evaluations of the Hull Hydrodynamic Performances A. R. Prabowo; R. M. R. Guzherra; J. Ndarumukti; D. S. Kalia; A. K. A. Putri; A. J. P. Wijaya; T. P. Nguyen; Q. T. Do; I. Istanto; T. Muttaqie; D. D. D. P. Tjahjana; M. L. A. Wardhana; M. Jurkovič; S. Onyshchenko
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-06

Abstract

This study aims to evaluate the feasibility and performance of an X-Bow hull configuration applied to a medium-sized passenger ferry for short-sea transportation as part of environmentally sound technology within Sustainable Development Goal (SDG) 17. The objective is to quantify its effectiveness in reducing hydrodynamic resistance and propulsion power demand compared to a conventional raked-bow design at a service speed of 11 knots. A Parent Design Approach was adopted to modify the baseline hull while systematically preserving its principal characteristics. A parametric study of stem and flare angles was conducted to determine the optimal hull configuration. Design and analysis were carried out using the 3D Non-Uniform Rational B-Spline (NURBS) modeling approach under Sea State 3 (slight wave) conditions. A Multi-Attribute Decision Making (MADM) framework was applied to integrate resistance, stability, seakeeping, Motion Sickness Incidence (MSI), and hydrostatic assessments. The results show that the optimal configuration, defined by a stem angle of 6° and a flare angle of 21°, reduces hydrodynamic resistance by 8.44% and corresponding propulsion power by 8.44% compared to the baseline hull. The design demonstrates improved motion characteristics under moderate wave conditions. The novelty of this study lies in the parametric evaluation of X-Bow geometry for medium-sized passenger ferries, a topic that remains underexplored compared to offshore vessel applications.
The Effectiveness of Underwater Sill with Stepped Slope to Reduce Siltation in a Harbor Basin Zihad Al Fattah; Radianta Triatmadja; Benazir
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-09

Abstract

Harbor basins located near river mouths are highly susceptible to sedimentation, resulting in substantial maintenance dredging costs. Underwater sills (UWSs) have been widely recognized as an effective measure for reducing sediment intrusion into harbor basins. However, conventional concrete UWSs are costly, while alternative materials such as geobags often require sloped configurations that may affect sediment-trapping performance. This study investigates the effectiveness of stepped-slope UWSs using the meshless numerical model DualSPHysics. The numerical model was validated against a physical-scale experiment to ensure its reliability in reproducing the relevant hydrodynamic processes. The results show that DualSPHysics accurately captures the flow field and the complex flow structures around the UWS. Hydrodynamic analyses indicate that stepped-slope geometry significantly influences local flow patterns and the net vertical settling velocity of suspended sediment particles. Milder slopes generally reduce sediment-trapping efficiency, whereas steeper slopes promote greater sediment retention upstream of the structure. The influence of slope angle is more pronounced for sediment with higher settling velocities and decreases as settling velocity becomes smaller. These findings provide practical guidance for the design of geobag-based UWSs for harbor sedimentation management.
Mitigating Climate-Intensified Flood Peaks Using Biopores and Infiltration Wells in Tropical Indonesian Watersheds Amrullah Mansida; Firdaus; Imam Rohani; Farida Gaffar; Satriani Rising
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-018

Abstract

This study evaluates the effectiveness of biopore absorption holes (BAH) and infiltration wells (IW) in reducing surface runoff and flood peak discharge in the Upper Maros Sub-Watershed, Indonesia, where mixed dryland agriculture dominates runoff generation. Field experiments were conducted on three representative land-cover classes, namely mixed dryland agriculture, secondary dryland forest, and shrubland, under baseline and post-intervention conditions. Rainfall intensity was estimated using the Mononobe method, infiltration was analyzed using the Horton model, surface runoff was estimated using the SCS-CN method, and peak discharge was simulated using the Nakayasu Synthetic Unit Hydrograph. The results showed a very strong runoff-peak discharge relationship, with a correlation coefficient of approximately 0.98, confirming that direct runoff is the dominant control of flood peaks. The infiltration-based interventions reduced mean surface runoff by about 57.6%, raised the infiltrated share of the combined runoff-infiltration volume to 66.41% under BAH and 69.29% under IW (23.37% at baseline), and decreased peak discharge by 55.8-59.4% across return periods from Q2 to Q100. The novelty of this study lies in integrating field-based infiltration interventions, land-cover-specific runoff analysis, and return-period flood simulation to demonstrate how low-cost nature-based solutions can weaken runoff sensitivity, enhance infiltration storage, and improve flood adaptation in tropical agricultural watersheds.
Mechanical and Durability Performance of Concrete Incorporating Water-Quenched HDPE Coarse Aggregates Nasruddin; Pratiwi Mushar; Imriyanti; Marchelinus Pabendan
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-015

Abstract

Plastic waste, particularly High-Density Polyethylene (HDPE), poses a serious environmental challenge due to its non-biodegradable nature and increasing accumulation. This study aims to investigate the mechanical and durability performance of structural concrete incorporating water-quenched HDPE plastic bag waste as a partial replacement for coarse aggregate. An experimental program was conducted using concrete mixtures designed for a target compressive strength of 25 MPa with HDPE replacement levels of 0.00% (control), 0.50%, 0.70%, and 0.90%. The HDPE waste was processed through melting followed by rapid water quenching to improve its physical characteristics and compatibility with the cement matrix. Cylindrical specimens (100 mm × 200 mm) were wet-cured and tested at 7, 14, 21, and 28 days. Mechanical performance was evaluated through compressive and splitting tensile strength tests, while durability was assessed using water absorption measurements. The results showed that the incorporation of 0.50% HDPE produced the highest 28-day compressive strength of 27.94 MPa, exceeding the control concrete, whereas the highest splitting tensile strength of 3.39 MPa was achieved at 0.90% HDPE. In addition, water absorption decreased progressively with increasing HDPE content, indicating improved durability performance. The novelty of this study lies in the application of a water-quenching treatment to HDPE plastic bag waste prior to its use as coarse aggregate replacement, demonstrating its potential to enhance concrete performance while promoting sustainable waste utilization and environmentally responsible construction practices.
Structural Performance of Cross-Laminated Pultruded Hollow-Section GFRP Beams Strengthened with CFRP Pingkan Nuryanti; Annisa Prita Melinda; Daisuke Takada; Shintaro Tahara; Yuji Takiuchi; Shoji Nakazawa; Yukihiro Matsumoto
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-03

Abstract

Pultruded glass fiber-reinforced polymer (GFRP) hollow sections are attractive lightweight structural members but are often limited by low transverse stiffness and local instability under bending. This study investigates the flexural behavior of carbon fiber-reinforced polymer (CFRP)-strengthened cross-laminated pultruded GFRP (CL-GFRP) hollow beams and develops a stage-dependent analytical framework to describe stiffness evolution before and after damage initiation. Four CL-GFRP beam configurations (60 × 200 mm cross-section and 1450 mm length) with different layer orientations and strengthening conditions were tested under four-point bending (one specimen per configuration). The experimental results were interpreted using a transformed-section analytical model combined with a bilinear elastic–post-damage representation. Beams with the longitudinal GFRP layer located at the tensile face exhibited approximately 28% higher load resistance at a displacement of 60 mm (span/20) than those with the transverse layer in tension. CFRP strengthening increased load-carrying performance by approximately 35% and initial stiffness by 44–58%, while increasing post-damage stiffness and modifying damage progression. Analytical predictions showed good agreement with experimental responses within the elastic stage, while the post-damage response was represented qualitatively. The proposed framework provides insight into the interaction between layer orientation, CFRP strengthening, and damage evolution in a novel CL-GFRP structural system.
Seismic Analysis of a Retrofitted Building by CFRP Using a Combined Numerical and Machine Learning Approach Ibtehal A. Ali Al-Naqdi; Ali Mohammed Rashid
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-020

Abstract

The purpose of this research is to create and test a machine learning-based model to predict the structural response of moment- and shear-loaded CFRP-confined concrete elements. The numerical simulation of the dataset was carried out in SAP2000, with the number of stories, seismic scaling factor and analysis type as the varying input parameters (the concrete compressive strength being carried as an additional feature to represent CFRP confinement in the validation stage) and moment and shear capacities as the target structural responses. The numerical results were then used to train and test the predictive model, and its performance was evaluated using the coefficient of determination (R²), root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). The results showed good predictive capability for moment capacity, with R² of 0.846, RMSE of 7.8, MAE of 6.7, and MAPE of 9.4%, indicating good generalisation to unseen cases and identification of the most dominant patterns for flexural behaviour. The novelty of this study is the combination of machine learning and finite element-based structural simulation, enabling a more cost-efficient predictive approach that reduces the need for repeated numerical analysis for preliminary assessment, structural design optimisation, and data-driven decision-making in practical CFRP strengthening applications.
Global Mapping of Urban Flood Mitigation Infrastructure and Risk Management: Bibliometric and Systematic Review Mantahari Hasibuan; Ginanjar D. Prasetyo; Reinildis C. Bandu; Zoar A. M. Tumalang; Filbert J. Lauw; Tsanny M. A. Daud Putuhena; Ridho Azahar
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-023

Abstract

Urban flooding poses a serious threat to urban sustainability due to climate change, rapid urbanization, and increasing socio-economic vulnerability. This study aims to map the global development of research on urban flood mitigation infrastructure and risk management. A bibliometric analysis was conducted on 297 Scopus-indexed documents published between 2002 and 2025, complemented by a systematic literature review of 125 selected documents from 2016 to 2025. The analysis covered publication trends, countries, institutions, authors, collaboration networks, keywords, infrastructure types, analytical methods, research challenges, and future research directions. The findings show that publications have increased sharply since 2018, with the highest growth recorded in 2024 and 2025. The United States is the main center of research productivity and global collaboration. Thematically, the field has shifted from conventional infrastructure toward adaptive infrastructure that integrates green infrastructure, blue-green infrastructure, nature-based solutions, sustainable drainage systems, and hybrid systems. Analytical approaches have also advanced through the use of GIS, hydrodynamic modeling, remote sensing, machine learning, flood frequency analysis, and real options analysis. However, gaps remain in climate scenario integration, data availability in developing cities, infrastructure maintenance, governance, social equity, and risk communication. The study implies that urban flood mitigation policies should be data-driven, inclusive, adaptive, and collaborative to strengthen long-term urban resilience in practice worldwide.
Multi-Objective Characterization of the Efficient Activated-Sludge Secondary-Treatment Design Domain Using BIM and Generative Design Christian Andrés Yanza-Pérez; Christian Miguel Pacheco-Rodríguez; Mario Núñez-Fernández; Carmen Calvo-Jurado; Juan Pedro Cortés-Pérez
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-02

Abstract

This study characterizes the efficient preliminary-design domain of activated-sludge secondary treatment (ST) in wastewater treatment plants (WWTPs) by integrating geometric, economic, and environmental criteria. A parametric Building Information Modeling (BIM) workflow in Revit-Dynamo was coupled with Generative Design (GD) and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) to minimize direct construction cost and embodied CO2-eq over life-cycle modules A1-A5, while independently maximizing the installed useful volumes of the biological reactor (BR) and secondary clarifier (SC). The analysis varied population equivalent (PE), biochemical oxygen demand (BOD), mixed liquor suspended solids (MLSS), geometry, and modularity, limited to two BRs and two SCs. Three random-seed runs generated 340, 323, and 295 non-dominated solutions. The reference run occupied an observed non-dominated domain of approximately 1800-5800 PE and 89.7-256.9 g BOD/PE·day, comprising a region predominantly occupied by 1 BR configurations, a modular coexistence and transition band, and a region without observed non-dominated solutions under the adopted bounds. Cost and CO2-eq were almost perfectly coupled across seeds, with Spearman’s rank correlation coefficients ranging from 0.9978 to 0.9980; BOD showed a stronger association with CO2-eq/PE than PE; and the BR contributed 88.08-89.64% of ST embodied CO2-eq. The workflow provides a traceable decision domain whose empirical envelopes characterize the explored solution space rather than universal feasibility limits.
Development of Empirical Correlations Between CBR and Plate Load Test Results for Friable Gypseous Subgrade Soils Shaimaa Hasan Fadhil; Ali A. Al-Shamoosi; Mohammed Khachi Hatem; Taha Y. Abdulnabi
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-08

Abstract

Friable gypseous subgrade soils are considered highly sensitive to moisture changes, making them a challenging issue when constructing on such soils, particularly when the soil is subjected to inundation. Due to a lack of relevant studies, this research presents a study and develops correlations between the California Bearing Ratio CBR% and the results of the plate load tests PLT presented by the modulus of subgrade reaction ks and strain modulus Ev conducted under the dry and soaked conditions for subgrade soils in Al-Fallujah district, Iraq. A total of ten boreholes, trial pits, CBR tests, and PLT were conducted. The results of the PLT revealed that under the soaked conditions, the soil settlement increased by up to 702.8% compared to that in the dry conditions. Also, ks and Ev dropped significantly by up to 82.2% and 87.2%, respectively. Relationships between CBR%, ks, and Ev in the dry and soaked conditions are presented. These correlations are used to enable more efficient understanding and estimation of subgrade performance. Statistical analyses show no statistically significant linear relationships between CBR and ks or Ev under either dry or soaked conditions. Moreover, the behavior of soil in dry conditions does not significantly predict its behavior in soaked conditions.
Impact Response of RC Beams Under Mass–Velocity Variations and Axial Compression: Constitutive Model Comparison Nutchanok Ueatrongchit; Chinnapat Buachart; Worathep Sae-Long; Piti Sukontasukkul; Panatchai Chetchotisak; Suchart Limkatanyu; Chayanon Hansapinyo
Civil Engineering Journal Vol. 12 No. 10 (2026): October
Publisher : Salehan Institute of Higher Education

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28991/CEJ-2026-012-010-022

Abstract

This study aims to investigate the impact response of reinforced concrete (RC) beams under equal-energy mass–velocity combinations and combined axial compression and to compare the predicted responses obtained from different concrete constitutive models. Nonlinear finite element simulations were performed using LS-DYNA and validated against a published drop-weight impact experiment. Three concrete models, KCC (*MAT_072R3), CSCM (*MAT_159), and Winfrith (*MAT_084), were compared using consistent fundamental material properties. Five mass–velocity combinations, ranging from 50 kg–13.72 m/s to 1000 kg–3.07 m/s at a constant impact energy of approximately 4.7 kJ, and axial compression ratios of 0–30% were investigated. The results show that equal impact energy does not produce equivalent structural responses. Low-mass/high-velocity impacts generated higher peak forces, shorter contact durations, and localized shear-dominated damage, whereas high-mass/low-velocity impacts produced greater displacement and flexural behavior. Increasing axial compression generally increased peak force while reducing displacement and contact duration. The three models predicted similar global responses but showed greater differences in local impact responses, particularly peak force and damage localization. The novelty of this study lies in systematically comparing the predictions of different concrete constitutive models under varying mass–velocity combinations and axial compression, providing guidance for constitutive-model selection in RC impact simulations.

Filter by Year

2015 2026


Filter By Issues
All Issue Vol. 12 No. 10 (2026): October Vol. 12 No. 9 (2026): September Vol. 12 No. 8 (2026): August Vol. 12 No. 5 (2026): May Vol. 12 No. 4 (2026): April Vol. 12 No. 3 (2026): March Vol. 12 No. 2 (2026): February Vol. 12 No. 1 (2026): January Vol. 11 No. 12 (2025): December Vol. 11 No. 11 (2025): November Vol. 11 No. 10 (2025): October Vol. 11 No. 9 (2025): September Vol. 11 No. 8 (2025): August Vol. 11 No. 7 (2025): July Vol. 11 No. 6 (2025): June Vol. 11 No. 5 (2025): May Vol 11, No 3 (2025): March Vol. 11 No. 3 (2025): March Vol. 11 No. 2 (2025): February Vol 11, No 2 (2025): February Vol 11, No 1 (2025): January Vol 10, No 12 (2024): December Vol. 10 No. 11 (2024): November Vol 10, No 11 (2024): November Vol 10, No 10 (2024): October Vol 10, No 9 (2024): September Vol 10, No 8 (2024): August Vol 10, No 7 (2024): July Vol. 10 No. 7 (2024): July Vol 10, No 6 (2024): June Vol. 10 No. 5 (2024): May Vol 10, No 5 (2024): May Vol 10, No 4 (2024): April Vol 10, No 3 (2024): March Vol 10, No 2 (2024): February Vol 10, No 1 (2024): January Vol 10 (2024): Special Issue "Sustainable Infrastructure and Structural Engineering: Innovations in Vol 9, No 12 (2023): December Vol 9, No 11 (2023): November Vol 9, No 10 (2023): October Vol 9, No 9 (2023): September Vol 9, No 8 (2023): August Vol 9, No 7 (2023): July Vol 9, No 6 (2023): June Vol 9, No 5 (2023): May Vol 9, No 4 (2023): April Vol 9, No 3 (2023): March Vol 9, No 2 (2023): February Vol 9, No 1 (2023): January Vol 9 (2023): Special Issue "Innovative Strategies in Civil Engineering Grand Challenges" Vol 8, No 12 (2022): December Vol 8, No 11 (2022): November Vol 8, No 10 (2022): October Vol 8, No 9 (2022): September Vol 8, No 8 (2022): August Vol 8, No 7 (2022): July Vol 8, No 6 (2022): June Vol 8, No 5 (2022): May Vol 8, No 4 (2022): April Vol 8, No 3 (2022): March Vol 8, No 2 (2022): February Vol 8, No 1 (2022): January Vol 7, No 12 (2021): December Vol 7, No 11 (2021): November Vol 7, No 10 (2021): October Vol 7, No 9 (2021): September Vol 7, No 8 (2021): August Vol 7, No 7 (2021): July Vol 7, No 6 (2021): June Vol 7, No 5 (2021): May Vol 7, No 4 (2021): April Vol 7, No 3 (2021): March Vol 7, No 2 (2021): February Vol 7, No 1 (2021): January Vol 7 (2021): Special Issue "Innovative Strategies in Civil Engineering Grand Challenges" Vol 6, No 12 (2020): December Vol 6, No 11 (2020): November Vol 6, No 10 (2020): October Vol 6, No 9 (2020): September Vol 6, No 8 (2020): August Vol 6, No 7 (2020): July Vol 6, No 6 (2020): June Vol 6, No 5 (2020): May Vol 6, No 4 (2020): April Vol 6, No 3 (2020): March Vol 6, No 2 (2020): February Vol 6, No 1 (2020): January Vol 6 (2020): Special Issue "Emerging Materials in Civil Engineering" Vol 5, No 12 (2019): December Vol 5, No 11 (2019): November Vol 5, No 10 (2019): October Vol 5, No 9 (2019): September Vol 5, No 8 (2019): August Vol 5, No 7 (2019): July Vol 5, No 6 (2019): June Vol 5, No 6 (2019): June Vol 5, No 5 (2019): May Vol 5, No 4 (2019): April Vol 5, No 4 (2019): April Vol 5, No 3 (2019): March Vol 5, No 3 (2019): March Vol 5, No 2 (2019): February Vol 5, No 2 (2019): February Vol 5, No 1 (2019): January Vol 5, No 1 (2019): January Vol 4, No 12 (2018): December Vol 4, No 12 (2018): December Vol 4, No 11 (2018): November Vol 4, No 11 (2018): November Vol 4, No 10 (2018): October Vol 4, No 10 (2018): October Vol 4, No 9 (2018): September Vol 4, No 9 (2018): September Vol 4, No 8 (2018): August Vol 4, No 8 (2018): August Vol 4, No 7 (2018): July Vol 4, No 7 (2018): July Vol 4, No 6 (2018): June Vol 4, No 6 (2018): June Vol 4, No 5 (2018): May Vol 4, No 5 (2018): May Vol 4, No 4 (2018): April Vol 4, No 4 (2018): April Vol 4, No 3 (2018): March Vol 4, No 3 (2018): March Vol 4, No 2 (2018): February Vol 4, No 2 (2018): February Vol 4, No 1 (2018): January Vol 4, No 1 (2018): January Vol 3, No 12 (2017): December Vol 3, No 12 (2017): December Vol 3, No 11 (2017): November Vol 3, No 11 (2017): November Vol 3, No 10 (2017): October Vol 3, No 10 (2017): October Vol 3, No 9 (2017): September Vol 3, No 9 (2017): September Vol 3, No 8 (2017): August Vol 3, No 7 (2017): July Vol 3, No 7 (2017): July Vol 3, No 6 (2017): June Vol 3, No 5 (2017): May Vol 3, No 5 (2017): May Vol 3, No 4 (2017): April Vol 3, No 3 (2017): March Vol 3, No 2 (2017): February Vol 3, No 2 (2017): February Vol 3, No 1 (2017): January Vol 2, No 12 (2016): December Vol 2, No 12 (2016): December Vol 2, No 11 (2016): November Vol 2, No 11 (2016): November Vol 2, No 10 (2016): October Vol 2, No 9 (2016): September Vol 2, No 9 (2016): September Vol 2, No 8 (2016): August Vol 2, No 8 (2016): August Vol 2, No 7 (2016): July Vol 2, No 7 (2016): July Vol 2, No 6 (2016): June Vol 2, No 6 (2016): June Vol 2, No 5 (2016): May Vol 2, No 4 (2016): April Vol 2, No 3 (2016): March Vol 2, No 3 (2016): March Vol 2, No 2 (2016): February Vol 2, No 1 (2016): January Vol 1, No 2 (2015): December Vol 1, No 1 (2015): November More Issue