Garuda - Garba Rujukan Digital

All

JURNAL REKAYASA SISTEM INDUSTRI

rsi
Website

Published by Universitas Putera Batam

ISSN : 24772089 EISSN : 26211262 DOI : -

Core Subject : Economy, Science, Engineering,

Computer Science & IT Economics, Econometrics & Finance Industrial & Manufacturing Engineering Materials Science & Nanotechnology

Jurnal Rekayasa Sistem Industri (JRSI) terbit sebanyak dua kali dalam satu tahun (Mei dan November). Terhitung Mulai edisi Mei 2018 publikasi jurnal ini telah dilakukan versi online (ISSN 2621-1262) yang sebelumnya hanya berupa versi cetak (print) (ISSN 2477-2089). Publikasi ini bertujuan untuk menghimpun informasi seputar gagasan, teori dan aplikasi bidang keilmuan Teknik Industri dan Manufaktur.

Arjuna Subject : -

Articles 9 Documents

Search results for , issue "Vol 5 No 2 (2020): (Mei 2020)" : 9 Documents clear

ANALISIS BIAYA TRANSPORTASI DISTRIBUSI PUPUK MENGGUNAKAN SOFTWARE LINGO: PERBANDINGAN BIAYA TRANSPORTASI DISTRIBUSI PUPUK MENGGUNAKAN SOFTWARE LINGO Fitria Noor Aida; Windi Rahmanda
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

The distribution of fertilizers in Central Sulawesi Province has not been efficient due to the large transportation costs in March 2016, the distribution of fertilizers could not go directly to retailers because the distance between regencies was far enough so that fertilizer was sent to distributors before to retailers to minimize costs to be incurred. company. Transhipment problems are in the form of indirect distribution problems because the products sent must go through several stages before reaching the consumer. This study will compare the Vogel Approximation method in previous studies with the completion of linear programming with Lingo software tools. Transportation costs using the Vogel Approximation method in previous studies compared with transportation costs using the Lingo software tool have the same cost of IDR 508,289,000, but there are several different fertilizer distributions. Lingo software simplifies data processing so that the results obtained are more accurate than the Vogel Approximation method. Companies can use lingo software to minimize costs by working effectively and efficiently.

PENGUKURAN TINGKAT KEPUASAN KONSUMEN TERHADAP KUALITAS PELAYANAN ETHIKOPIA COFFEE DI KABUPATEN SLEMAN Tri Wisudawati; Wahyu Adhi Saputro
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

The coffe shop is not just a place to drink coffe but is a lifestyle. Coffee had a positive development trend in accordance with the habits of many people to drink coffee. One of the cafes that is currently popular in Sleman Regency is Ethikopia Coffee. Ethikopia Coffe visitors are satisfied to enjoy coffe products. This study aims to determine the final level of and italic statisfaction using servqual and in terms of five aspects namely tangibility, reliability, responsiveness, assurance and empathy. This study used 30 samples with method a accidental sampling. Servqual score shows the average value gab for each dimension, tangible (-0.75), reliability (-0.47), responsive (-0.20) assurance (-1.01) and empathy (-0,42). The IPA analysis on Ethikopia Coffe that needs to be improved is in quadrant I is the tangible, responsive and empathic dimensions.

OPTIMASI KAPASITAS PRODUKSI UKM DENGAN GOAL PROGRAMMING Welly Sugianto
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

UKM Jovelyn is a small medium enterprise (SME) that engaged in the field of bakery production. Until now, they produce cakes and cookies. They sell products throughout the Batam area which includes (Tiban market, aviari market, mitra market and puja bahari market), shops, school canteens and so on. The SME targets several things such as profit per month, number of hours worked, number of overtime hours, machine utilities, labor utilities and so forth. Until now, the SME has not been able to reach the targets because the UKM has not determined the production amount based on the appropriate calculation. The number of products made is determined only on an intuitive basis. Determination of the amount of production cannot be determined by the usual simplex method because the objective function in the usual simplex method contains a target. Problem solving is done by using goal programming. The results of the calculation analysis show that to achieve the optimal value, the SME must produce coconut root cookies, butter cookies, nastar cookies, snow princess cookies and peanut cookies respectively 11.89 kg, 22.43 kg, 24.96 kg , 1.97kg and 0 kg. Sensitivity analysis is carried out after there are changes in conditions that result in changes in the linear program matrix, so the number of products that must be made also changes which include coconut root cookies as much as 12.8 kg, as much as 16.91 kg of butter cookies, nastar cookies as much as 25.7 and the last is 3.39 kg of nut cookies which in the initial calculation, nut cookies were not produced. The sensitivity analysis is not done by recalculation but rather by modifying the matrix and completing iteration with primal dual.

ANALISIS PENINGKATAN PRODUKSI DENGAN RANCANG BANGUN ALAT PEMOTONG PADA PROSES PACKING: rancangan bangun alat pemotong dalam peningkatan produksi Ganda Sirait; Elva Susanti
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

Improving company productivity and efficiency in empowering human resource assessment is fulfilled to achieve company goals. one factor that can be done is the development of more effective equipment. Plastic cutting tools in the product packaging process are still simple, less efficient and less effective. The value engineering method is used as a method for selecting an alternative modification to a modified cutting tool and analyze it. At the analysis stage, two alternative modifications were modified from the improvement engine, where the initial design is used as a benchmark in performance evaluation. The result of tool design is the reduction in the number of defective products by 20.68% to 3.1% and The result of the cutting tool design is that there is an average increase in production 246 products per day.

OPTIMASI BIAYA PENGIRIMAN KELAPA MENGGUNAKAN MODEL TRANSPORTASI METODE STEPPING STONE Muhamad Anwar Septiana; Rifki Hidayattulloh; Jamari Machmudin; Nitta Fitria Anggraeni
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

Coconut is one of the commodities that is quite important for food needs in Indonesia, especially for dishes made from coconut milk and grated coconut. This study aims to resolve the problem of coconut shipping costs at the level of coconut wholesalers with the name of the owner Mr. Yayan in the Greater Bandung area. Coconut is supplied from 3 regions namely Tasikmalaya, Lampung and Riau. Of the three regions, coconuts will be stored in 3 warehouses, namely Karapitan, Ciganitri and Cikoneng. From the three warehouses, coconut will be distributed to 3 markets in Bandung, namely Cijerah Market, Batu Buah Market and Baleendah Market. Coconut shipping uses land transportation such as pick up cars. Shipping costs are calculated based on the amount per coconut to be sent to the market. To optimize shipping costs to 3 markets in Bandung, the Northwest Corner (NWC) transportation model is used. The initial step to completing the optimal shipping transportation costs is by establishing shipping costs from the warehouse to the market, the amount of coconuts stored in the warehouse and the demand for coconuts in each market into the transportation model. The direct calculation of the cost of transporting coconut shipments from 3 warehouses to 3 markets using the Northwest Corner model is Rp 167,500. Furthermore, looking for the most optimal results using the Stepping Stone method that can provide an optimal solution to the cost of transporting coconut shipping to Rp 147,500 So by finding the most optimal results using the Stepping Stone method can save transportation costs of shipping coconut from the warehouse to the market by Rp 20,000.

ANALISIS TINGKAT KERUGIAN KEHILANGAN AIR PADA PROSES DISTRIBUSI SPAM UNS Enggar Wahyu Wulaningtyas; Ferry Dimas Prakoso; Meidi Putri Ariyani; Muhammad Iriandru Pradipta; Yuniaristanto Yuniaristanto; Wahyudi Sutopo
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

As time goes by, there are more problems regarding the quantity and quality of water in Indonesia. One of these problems was found at Sebelas Maret University (UNS), precisely at Sistem Penyediaan Air Minum UNS (SPAM UNS). In serving its customers, SPAM UNS provides water tap and water dispenser facilities. However, there are still many weaknesses in the distribution of water. This is due to the frequent occurrence of pipe leaks and it takes a long time to find the location of the leak. As a result, financial losses experienced are quite large. The purpose of this study is to reduce losses by using the District Meter Area (DMA) concept to determine the area coverage (zoning) and the Analytical Hierarchy Process (AHP) method to determine the location of new reservoirs as a follow up of the zoning system. By implementing the DMA concept and the AHP method, SPAM UNS is able to reduce financial losses. The results obtained are making a new reservoir feasible because the value of the construction is almost the same as the initial loss value experienced by the UNS SPAM distribution network

IMPLEMENTASI METODE DJIKSTRA DALAM MENENTUKAN JARAK TERPENDEK PADA PENDISTRIBUSIAN BARANG PT. AKUR MAKMUR Haerul Anwar; Randi Kurnia Sandi; Adi Sukma
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

PT. Akur Makmur needs the shortest distance solution for the process of distributing goods from theCentral Warehouse distribution to branches that need in the City quickly, this solution is needed toavoid congestion and speed in distributing goods, and djikstra in accordance with one of the methodsused to renew the shortest path so that the goods arrive on time. PT. Akur Makmur can minimize thecosts and time needed to distribute goods. The problems in this study are (1) How does PT. Make graphsin the form of graphs (2) How PT. Accurately determine the shortest distance using the djikstra method(3) Determine the costs that can be resolved if using the calculation results with the djikstra methodIn this study, taking real data in the field, then measuring the distance and time to use GoogleMaps facilities, then measuring the shortest distance using the djikstra algorithm, then compiling theroute of the data obtained and looking for the shortest path using the djikstra algorithm.Based on the results of this study, it can be concluded (1) determining the trajectory in the form ofa graphical algorithm (3) comparing the weight of each trajectory distance traversed in the distributionof goods (3) determining the shortest route to be used in the distribution of goods.Advice can be given to PT. Akur Makmur is as a comparison and alternative to the shortest pathchoice in the distribution of goods.

USULAN PERBAIKAN TATA LETAK FASILITAS PRODUKSI INDUSTRI KOPI STUDI KASUS CV. TRI ANOM AGROTEKTUR Nabilla Saptaryana Martha; Irfan Ardiansah
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

Industrial layout is one of the important factors that affecting the efficiency of the production operation process, which can be seen from the material movement activities to be processed into products. CV. Tri Anom Agrotektur manages the coffee industry which is divided into 2 activity sectors, namely the upstream and downstream sectors. This study designed a proposal to improve the factory layout of the company’s upstream sector using qualitative methods and direct interviews with factory employees. In determining the layout improvement of the industry, it is necessary to first identify the production process, using the Process Flow Diagram and Process Flow Map. The data processing methods used are: Activity Relationship Chart (ARC), Activity Relationship Diagram (ARD), and Activity Allocation Diagram (AAD). Total area of the factory building is ± 1.072 m2, while the proposed total area of the building based on the area of the machine, the area of the employee’s movement and the additional area of production support room is ± 833 m2. The total proposed rooms are 23 rooms. Proposed improvements to the industrial layout can be use as company reference that is expected to increase productivity and reduce production costs

PENERAPAN METODE KLASIFIKASI ABC DAN 5S PADA GUDANG TOOLS PT. MESIN ISUZU INDONESIA: Penerapan Metode Klasifikasi ABC dan 5S Pada Gudang Tools PT. Mesin Isuzu Indonesia Olga Aditya Putra; Indro Prakoso
JURNAL REKAYASA SISTEM INDUSTRI Vol 5 No 2 (2020): (Mei 2020)
Publisher : Universitas Putera Batam

PT.Mesin Isuzu Indonesia manufacturing industry engaged in the automotive sector which produces machinery for Isuzu products as well as several other car parts. The warehouse is a very vital place for every company, the optimal warehouse layout will support the company's production process in meeting production targets because makes it easy to get things. The potential for tool changes can not be avoided and can occur at any time, the search process for the old tool will increase maintenance time so that it is feared that the target wil not be met. This means that the layout of the tool shed must be made optimal so that when engine maintenance occurs the search process for the tool does not take much time. ABC Classification is a method for grouping based on 3 types: fast, medium, and slow. The results of this research are the layout of tools on a shelf based on ABC classification and 5S principles

Page 1 of 1 | Total Record : 9

Filter by Year

2020 2020

Filter By Issues

All Issue Vol 10 No 2 (2025): Mei 2025 Vol 10 No 1 (2024): November 2024 Vol 9 No 2 (2024): Mei 2024 Vol 9 No 1 (2023): November 2023 Vol 8 No 2 (2023): (Mei 2023) Vol 8 No 1 (2022): (November 2022) Vol 7 No 2 (2022): (Mei 2022) Vol 7 No 1 (2021): (November 2021) Vol 6 No 2 (2021): (Mei 2021) Vol 6 No 1 (2020): (November 2020) Vol 5 No 2 (2020): (Mei 2020) Vol 5 No 1 (2019): (November 2019) Vol 4 No 2 (2019): Edisi Mei Vol 4 No 1 (2018): (November 2018) Vol 3 No 2 (2018): Mulai tersedia daring sejak Juni 2018 Vol 3 No 1 (2017): (Desember 2017) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
,

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location , INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
,

INDONESIA