Garuda - Garba Rujukan Digital

All

Jurnal Optimasi Sistem Industri

JOSI
Website

Published by Universitas Andalas

ISSN : 20884842 EISSN : 24428795 DOI : -

Control & Systems Engineering Decision Sciences, Operations Research & Management Engineering Industrial & Manufacturing Engineering Mechanical Engineering

Jurnal Optimasi Sistem Industri (JOSI) is a peer-reviewed journal that is published periodically (April and October) by the Department of Industrial Engineering, Faculty of Engineering, Universitas Andalas, Padang.

Arjuna Subject : -

Articles 12 Documents

1 2

Search results for , issue "Vol. 17 No. 2 (2018): Published in October 2018" : 12 Documents clear

Pengaruh Shift Kerja, Terapi Musik, dan Motivasi terhadap Beban Kerja Karyawan PT. TOA-GALVA Industries Widiyarini
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

TOA Corporation has a factory in Indonesia with name PT TOA Galva Industries producing technology of communication device. This research aims to make improvement towards the workload of the employees in the production of injection plastic part. Problems that arise due to the mental workload of employees affect concentration, performance, achievements, and motivation at work, quality of sleep at home, health, and work accident. This caused by the target measurement and checking of the products of the company are set, the deadline the measurement and checking of products, Division of working time/shift work, irregular work environment factors (noise, temperature, lighting, etc.), and the personal problems brought on when working. Using NASA-TLX (Task Load Index) can be measured the mental workload employees through the phase weighting and rating stage. Early research result obtained values of WWL (weighted workload) of morning shift employees is 76,78, afternoon shift 77,97 and night shift 80,0 results experienced high mental workload. Proposed improvements were made with improved shift work, the application of music therapy and motivation. The evaluation result of the implementation of the improvement suggests the value of WWL (weighted workload) of morning shift employee is 53,34, afternoon shift 54,43, night shift 55,45 result decrease mental workload.

Pengaruh Budaya Organisasi dan Lingkungan Kerja terhadap Kepuasan Kerja dan Kinerja Karyawan Rizki Wahyuniardi; Sidik Nurjaman; Muhamad Rafi Ramadhan
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Perusahaan Listrik Negara (PLN) is a public company engaged in serving electricity in Indonesia. The company is a state-owned company which has a lot of human resources both from the level of general education up to the highest level of education. The rapid development of industrialization and technological innovation makes the company must be more competitive in facing the increasing of fierce competition in the current era of globalization. This study aims to analyze and prove the influence of organizational culture and work environment on employee performance through job satisfaction as a mediator or as an intervening variable. The study was conducted at PT. PLN (PERSERO) Distribution West Java Area Majalaya. Data were collected using questionnaires distributed to 146 employees and analyzed using Structural Equation Modeling (SEM) which was run by using AMOS 21.0 software. The results show that the organizational culture and work environment of PLN West Java Distribution Area Majalaya have a positive and significant influence on job satisfaction. Furthermore, the organizational culture, work environment, and job satisfaction of PLN employees have a positive influence on employee performance.

Aplikasi Penentuan Rute Distribusi LPG 3 Kg Difana Meilani; Arefa Iswara
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

PT IB. Sumberdaya Development is one of LPG agent partners of PT Pertamina. This company is assigned to distribute 3 kg LPG. The LPG shipment is carried out from Monday to Saturday. The shipment goes to 66 depots using agent vehicle which are registered in PT Pertamina. From the preliminary study, there were problems which related to the long-distance shipment, and the limitation of transportation and capacity. In this research, the shipment routes of 3 kg LPG in PT IB is determined. Sumberdaya Development problems consist of the distance of the travel, the time of travel, and optimal transportation cost. Based on Clarke and Wright Savings Matrix algorithm, by considering the vehicle capacity, the distance can be minimized. The point of this algorithm is calculating the saving by measuring the available reduction of distance and time. It is done by linking the existing depots and making a route which is based on the largest saving value of the distance from the agent to the destination depot. Each route is optimized by WIN QSB software by using Branch and Bound method. A program to facilitate the determination of shipment routes by using PHP programming language is designed. The proposed route for the 3kg LPG shipment is 762.35km with 33.58% saving, and the proposed time is 2929 minutes with 15.27% saving. The shipment schedule is designed from Monday to Saturday day to Saturday with each of 7 routes. This is better than the actual route used by the company.

Perancangan Sistem Informasi Pengendalian Kualitas pada Laboratorium Proses IV PT X Berry Yuliandra; Ratri Fradinda Wulan
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Effectiveness and efficiency can improve the performance of manufacturing companies. Such improvements can be achieved through the application of web-based applications. PT X is one of cement producers in Indonesia and to maintain its competitive advantage, PT X establishes several Process Laboratory responsible for its product quality control activities. One of them is Process Laboratory IV. Process Laboratory IV is still using spreadsheet based information system so that most of the activities and evaluation are still run manually. Some weaknesses are still encountered such as slow information flow rates, minimum levels of information security, and the potential for various forms of fraud. This research was conducted to design more efficient quality control information system through implementation of web based application. The information systems design created by building: (a) Business process diagrams (b) Use case diagrams, (c) Class diagrams, (d) Entity relationship diagrams, and (e) Databases, followed by web-based application design based on the results of information system design. The system design involves four actors with different authority and access levels to minimize information security issues. Through these conditions various forms of fraud can also be minimized. In addition, the system design also improves the information flow efficiency by eliminating the activity of re-input set point data. It can be concluded that the design of information systems with web-based applications have been able to help improve efficiency and minimize the weaknesses of current existing information systems in the PT X Process Laboratory IV.

Perumusan Strategi Penguasaan Industri Maritim Untuk Memperkuat Pertahanan Negara Nurcahya Dwi Asmoro; Budi Setiarso; Sukarno
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Natural resources and the strategic position of Indonesia in a cross position shipping lanes of the world contributed to having a great economic potential but also gives a serious impact threat. For that, it is needed a strong national defense in order to protect the sovereignty and territorial integrity of Indonesia. The overall defense system, involving the entire nation must be nurtured as directed. The national industry as one of the supporting components in the country's defense system should be controlled by domestic industry management, including the national industry in the sector of maritime transport means. Government's attention that supports the growth of maritime transport means is a great opportunity to boost the national economy as well as the preparations for war situations. Amid the possibilities and constraints, this study investigated the strategy for the control of the maritime industry to strengthen the country's defense. Mixed method research descriptive qualitative and quantitative SWOT analysis was used to investigate it. The study found that the strategy for the control of the maritime industry is to carry out the construction of port facilities, the construction of a fleet of ships made in the country, the formation of qualified human resources, to improve its management, ensure the availability of the main spare parts and improve shipbuilding capability, to optimize the benefits of sabotage principle to resolve banking policy which is still not very profitable to the industries.

Pengaruh Kualitas Pelayanan Kefarmasian terhadap Kepuasan Pasien Rawat Inap RSUP Dr. M. Djamil Padang Linda Eka Putri; Dachriyanus; Nilda Tri Putri
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Pharmaceutical services at the hospital are an integral part of the hospital's service system. The quality of the pharmacy service affects the hospital's performance as a service company. Pharmacy Installation of Dr. M. Djamil Padang Hospital based on data from Public Relation and Public Complaint Installation of Dr. M. Djamil Padang Hospital get complaint report on pharmacy service as many as 28 complaint reports in 2015 and 42 complaint reports in 2016. A decrease in the quality of care is indicated by the decrease in the number of in-patients in the period of 2013-2015 reaching an average of 2.89%, while the level of complaints on the quality of in-patient pharmacy service remains high with 31 complaints by years. This study aims to analyze the effect of hospital pharmacy service quality on patient satisfaction at pharmacy depo Dr. M. Djamil Padang Hospital. The measurements of all constructs and research indicators used questionnaires distributed to 320 in-patients as respondents. Path analysis used with software application of SPSS 17 to analyze the data. The result concluded that service quality consisting of service speed, attitude, and empathy of officer, drug availability, pharmacy depot location, and drug information simultaneously, influence on patient's satisfaction with a contribution of 74.10%. However, the partial attitude and empathy of the officers have no effect on the satisfaction of patients. While the provision of drug information is the most dominant factor of service quality in affecting patient satisfaction at pharmacy depo Dr. M. Djamil Padang Hospital.

Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB Nofriani Fajrah; Noviardi
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

PT APCB is an electronics company that produces electronic device components called Narrow Shaft. The purpose of this study is to evaluate the maintenance activity in a pre-turning machine by measuring the Overall Equipment Effectiveness (OEE) level. The OEE level is obtained based on the Availability, Performance, and Quality Rate of the pre-turning machine maintenance activities. In addition, the purpose of this study is to identify the causes of the ineffectiveness of pre-turning machine maintenance activities and provide improvement suggestions for maintenance effectiveness at PT APCB. Based on the results of the calculation of the OEE value it is known that the PT APCB company still has not reached the world standard of 85%. This shows that the company still has to improve maintenance activities in the pre-turning process. The calculation of OEE value shows that the lowest OEE level in February 2016 was 48.31%, while the highest OEE level in September 2016 was 83.23%. The low performance of the pre-turning machine process was due to the ineffectiveness of maintenance activities which were caused by 14 factors. The primary causal factor with the highest value is the bar feeder problem with the highest request frequency value of 250.

Evaluasi Proses Pelayanan Administrasi Kependudukan dengan Metode Lean Office Henra Nanang Sukma; Elita Amrina; Alizar Hasan
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

The problems occurred at the Pelalawan Population and Civil Registration Service are wasteful in the time of service for population administration. Therefore, this study aims to make improvements in reducing waste of service time and provide recommendations for managing the administrative service process, thus, it can be used as a reference in the process of improving government service organizations. The method used is the Define, Measure, Analyze, Improve, and Control (DMAIC) method, by removing unproductive process steps, which focus on measurements, and applying technology to improve the quality of the target towards Six-Sigma. The results obtained by following the DMAIC process are the smallest timeliness in providing services with a gap value=(-1,196), σ=1,62; the ease of the service procedure with the gap value=(-0,917), σ=1,76; the competence of the officers in the service with the gap value=(-0,897), σ=1,76; and written and electronic information resources that are needed by the gap value=(-0,876), σ=1,78. The study proposes improvements by creating digital document archive settings, conducting the performance measurements using VSM map, building the queue system, creating a flow of services, designing a one door services, and improving the quality of resources by training the officers.

Desain dan Analisis Artificial Exoskeleton pada Prajurit TNI Rudi Salam; Mohammad Iqbal; Iskandar Hasanuddin
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Soldier’s activities resulted in too much workload received by the body, especially in the back and waist. These conditions produce a high risk of musculoskeletal disorders especially if conducted continuously. The soldiers must carry a backpack containing supplies during training weighing up to 40 kg on average. All activities are conducted manually until the training is finish. Thus, the purposes of this study are to reduce spinal injury by identifying factors resulting from lifting loads that exceed the limits of the body, calculate the maximum load limit that can be carried by a soldier, and produce artificial exoskeleton as a tool for the Indonesian Armed Forces. The study used anthropometry, biomechanics, and physiological approach in solving the problem. The results show that the safe load can be carried by the soldiers is 30.46 kg. The body parts that feel the complaint are the upper neck, back, shoulder, buttocks. In addition, this study can produce a design of an artificial exoskeleton with the following dimensions: chest thickness 23 cm, chest width 32 cm, back length 52 cm. The soldiers can increase the force load by 9% of the initial weight of the load using this design.

Pengembangan Model Kualitas Pelayanan Jasa Pendidikan Sekolah Karakter di Jakarta Kirana Rukmayuninda Ririh; Firda Meira Pratiwi
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

This study aims to investigate the correlation of service quality to customer satisfaction, loyalty, and deployment of communication using Word of Mouth (WOM). The research was conducted at Character-based School in Jakarta, involving 84 parents as respondents. A purposive sampling method was applied. The data were collected through a survey questionnaire. The measurement was using a four-scale Likert. The analysis was supported by SEM (Structural Equation Modeling) which the tool was SmartPLS version 3.0. As results show that there were three significant relationships which between customer loyalty and Word of Mouth (0.691), service quality and customer satisfaction (0.298), also service quality and customer loyalty (0.340). It depicted that loyal customer was more significant than satisfying one. The conclusion of this study pointed out that loyalty played role in improving and maintaining a robust marketing strategy for Character-Based School. The more customer loyalty created the stronger word of mouth throughout customer.

Page 1 of 2 | Total Record : 12

1 2

Filter by Year

2018 2018

Filter By Issues

All Issue Vol. 24 No. 1 (2025): Published in June 2025 Vol. 23 No. 2 (2024): Published in January 2025 Vol. 23 No. 1 (2024): Published in July 2024 Vol. 22 No. 2 (2023): Published in December 2023 Vol. 22 No. 1 (2023): Published in May 2023 Vol. 21 No. 2 (2022): Published in November 2022 Vol. 21 No. 2 (2022): Published in October 2022 Vol. 21 No. 1 (2022): Published in April 2022 Vol. 21 No. 1 (2022): Published in May 2022 Vol. 20 No. 2 (2021): Published in October 2021 Vol. 20 No. 2 (2021): Published in November 2021 Vol. 20 No. 1 (2021): Published in May 2021 Vol. 20 No. 1 (2021): Published in April 2021 Vol. 19 No. 2 (2020): Published in October 2020 Vol. 19 No. 2 (2020): Published in November 2020 Vol. 19 No. 1 (2020): Published in June 2020 Vol. 19 No. 1 (2020): Published in April 2020 Vol. 18 No. 2 (2019): Published in October 2019 Vol. 18 No. 2 (2019): Published October 2019 Vol. 18 No. 1 (2019): Published in May 2019 Vol. 18 No. 1 (2019): Published April 2019 Vol. 17 No. 2 (2018): Published in October 2018 Vol. 17 No. 1 (2018): Published in April 2018 Vol. 16 No. 2 (2017): Published in October 2017 Vol. 16 No. 1 (2017): The Improved JOSI is Published in May 2017 Vol. 16 No. 1 (2017): Published in May 2017 Vol. 15 No. 2 (2016): Published in November 2016 Vol. 15 No. 1 (2016): Published in March 2016 Vol. 14 No. 2 (2015): Published in 1st October 2015 Vol. 14 No. 2 (2015): Published in October 2015 Vol. 14 No. 1 (2015): Published in April 2015 Vol. 13 No. 2 (2014): Published in 1st October 2014 Vol. 13 No. 2 (2014): Published in October 2014 Vol. 13 No. 1 (2014): Published in April 2014 Vol. 12 No. 2 (2013): Published in 1st October 2013 Vol. 12 No. 1 (2013): Published in 1st April 2013 Vol. 12 No. 2 (2013): Published in October 2013 Vol. 12 No. 1 (2013): Published in April 2013 Vol. 11 No. 2 (2012): Published in 1st October 2012 Vol. 11 No. 1 (2012): Published in 1st April 2012 Vol. 11 No. 2 (2012): Published in October 2012 Vol. 11 No. 1 (2012): Published in April 2012 Vol. 10 No. 2 (2011): Published in 1st October 2011 Vol. 10 No. 1 (2011): Published in 1st April 2011 Vol. 10 No. 2 (2011): Published in October 2011 Vol. 10 No. 1 (2011): Published in April 2011 Vol. 9 No. 2 (2010): Published in 1st October 2010 Vol. 9 No. 1 (2010): Published in 1st April 2010 Vol. 9 No. 2 (2010): Published in October 2010 Vol. 9 No. 1 (2010): Published in April 2010 More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Rika Ampuh Hadiguna

Contact Email
hadiguna@ft.unand.ac.id

Phone
-

Journal Mail Official
hadiguna@ft.unand.ac.id

Editorial Address
-

Location
Kota padang,

Sumatera barat

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Rika Ampuh Hadiguna

Contact Email hadiguna@ft.unand.ac.id

Phone -

Journal Mail Official hadiguna@ft.unand.ac.id

Editorial Address -

Location Kota padang, Sumatera barat INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Rika Ampuh Hadiguna

Contact Email
hadiguna@ft.unand.ac.id

Phone
-

Journal Mail Official
hadiguna@ft.unand.ac.id

Editorial Address
-

Location
Kota padang,

Sumatera barat

INDONESIA