Garuda - Garba Rujukan Digital

Perencanaan Ulang Tata Letak Fasilitas Produksi (Studi Kasus: UKM Pengolahan Ikan Asin Stefen Aluy-Meulaboh) Hadi, Khairul; Hasanuddin, Iskandar; Husni, Husni; Pamungkas, Iing; Fitriadi, Fitriadi; Irawan, Heri Tri
Jurnal Optimalisasi Vol 6, No 2 (2020): Oktober
Publisher : Universitas Teuku Umar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35308/jopt.v6i2.2569

This study used a rectilinear method in redesigning the layout of the salted fish production facility to minimize the mileage of Stefen Aluy's UKM. Stefen Aluy UKM is one of the salted fish businesses that is developing in West Aceh and its products are evenly distributed in West Aceh and its surroundings. The large production area makes it easier for UKM Stefen Aluy to maximize salted fish production. However, the large production area owned by UKM Stefen Aluy can result in long distances so that it is ineffective and efficient. The risk of worker fatigue and injury can occur due to the long distance. In addition, there is a risk of raw materials falling while moving. To minimize this potential, it is necessary to evaluate the layout of the salted fish production facilities at UKM Stefen Aluy, namely by improving the layout of the facilities. The rectilinear method can be used to minimize mileage in making layout improvements. From the results of the layout mapping based on the measurement of the rectilinear distance, the initial layout has a rectilinear distance of 6.932 cm, while the layout of the design results obtained a rectilinear distance of 3.409 cm. The result of the layout redesign resulted in a distance reduction of 49.04% from the previous distance.

Pengabdian Kepada Masyarakat Dengan Pendekatan Bakti Sosial dan Pelaksanaan Pelatihan Secara Berkelanjutan Rahmawati, Sri; Asmadi, Didi; Andriansyah, Andriansyah; Riza, Medyan; Hasanuddin, Iskandar; Hidayaturrahmi, Hidayaturrahmi
Jurnal Pengabdian Masyarakat: Darma Bakti Teuku Umar Vol 4, No 1 (2022): Januari-Juni
Publisher : Universitas Teuku Umar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35308/baktiku.v4i1.3939

Aceh merupakan salah satu provinsi yang masih terus bergelut dengan masalah kesenjangan ekonomi. Masih banyak masyarakat Aceh yang bekerja sebagai buruh harian dengan pendapatan yang minim dan kondisi kekurangan pengetahuan untuk pengelolaan sumber daya. Hal ini terus meningkat kala kondisi Aceh atau suatu daerah tertentu dihadapi dengan kondisi-kondisi bencana alam yang membatasi perputaran ekonomi dan kelancaran aktifitas normal harian seperti kondisi oleh pandemi covid-19 dan bencana alam. Untuk mendukung upaya dalam membantu masyarakat kecil yang terdampak ekonomi maka diperlukan peran akademisi, mahasiswa, masyarakat lainnya untuk bersama-sama membantu menyelesaikan masalah yang ada disekitar salah staunya dengan mengadakan bakti sosial dan pelaksanaan pelatihan secara berkelanjutan. Tujuan dari kegiatan ini adalah untuk membantu masyarakat, membangun rasa empati antar sesama dan membantu meningkatkan pengetahuan untuk pengelolaan sumber daya. Hasil yang diperoleh adalah penyaluran bakti sosial yang disalurkan tepat sasaran dan pengadaan pelatihan atau kunjungan relawan yang dilakukan akan bersifat berkelanjutan. Kata Kunci: Ekonomi, bakti sosial, covid-19, bencana alam.

Pelatihan Teknik Pengelasan dan Pengecatan Atomozing Bagi Santri Pesantren Anak Yatim Darul Hikmah Cot Yang-Kuta Baro Aceh Besar Akhyar; Sary, Ratna; Husaini; Khairil; Edhy, Sarwo; Tamlicha, Akram; Hasanuddin, Iskandar; Zulfan; Farhan, Ahmad
Kawanad : Jurnal Pengabdian kepada Masyarakat Vol. 3 No. 1 (2024): March
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/kjpkm.v3i1.206

Islamic boarding schools are traditional educational institutions that prioritize a religion-based curriculum. The Darul Hikmah Orphans Islamic Boarding School, located in Cot Yang Village, Kuta Barou District, Aceh Besar Regency, Aceh Province, faces the challenge of low levels of entrepreneurial skills in the field of welding and atomizing painting due to the absence of this material in their curriculum. To overcome this, atomizing welding and painting training was carried out at Islamic boarding schools, which aimed to improve students' hard skills in this field. This training is also planned to develop business units, including the establishment of atomizing welding and painting workshops. This atomizing welding and painting entrepreneurship training program is measured by several parameters, with the output being the basic welding technical skills obtained by the students. It is hoped that this program will produce entrepreneurs in atomizing welding and painting workshops that will benefit the environment of the Darul Hikmah Cot Yang Orphan Islamic Boarding School. The training implementation stages include welding and painting theory, occupational health and safety (K3), as well as practice and assistance in basic welding and painting, with the final product being a table. The training material was adopted from teaching welding and painting practices at Syiah Kuala Darussalam University-Aceh. The result of this training is an increase in participants' knowledge in welding and painting, as well as their ability to apply these processes by prioritizing K3 (Occupational Safety and Health).

IMPLEMENTASI DESAIN BARU BECAK LISTRIK PENGANGKUT SAMPAH UNTUK TRANSPORTASI RAMAH LINGKUNGAN DENGAN ENERGI TERBARUKAN Hasanuddin, Iskandar; Zulfan, Zulfan; Rahmawati, Sri; Sofyan, Sarwo Edhy; Ikramullah, Ikramullah; Tamlicha, Akram; Aulia, Udink; Syahriza, Syahriza; Darma, Yusria; Lulusi, Lulusi; Putra, Rudiansyah; Ahmadiar, Ahmadiar; Away, Yuwaldi; Herawati, Rama
Jurnal Vokasi Vol 7, No 3 (2023): November
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/vokasi.v7i3.4660

Transportasi berkelanjutan dan ramah lingkungan menjadi perhatian utama dalam upaya mengurangi dampak lingkungan dan ketergantungan pada bahan bakar fosil. Pada kegiatan ini desain baru becak listrik pengangkut sampah menggunakan sumber energi terbarukan untuk mengatasi tantangan transportasi dan pengelolaan sampah. becak ini akan diimplementasikan di daerah Aceh dan sekitarnya, terutama di sekitar kampus Universitas Syiah Kuala, Banda Aceh. Desain inovatif ini menggabungkan karakteristik tradisional becak dengan teknologi energi terbarukan guna menciptakan solusi yang relevan dengan lingkungan setempat. Dalam desain becak listrik baru ini, baterai lithium-ion diintegrasikan sebagai sumber utama, dengan kemampuan pengisian ulang melalui baterai yang dipasang pada struktur becak. Ini menghasilkan manfaat ganda dengan operasional yang lebih ekonomis dan berkontribusi pada lingkungan yang lebih bersih. Implementasi becak listrik ini akan memberikan dampak positif terhadap transportasi sampah di perkotaan Aceh. Selain mengurangi polusi udara dan kebisingan, becak ini akan memfasilitasi akses ke lokasi yang sulit dijangkau oleh kendaraan konvensional. Penting untuk dicatat bahwa kegiatan ini merupakan bagian dari upaya pengabdian kepada masyarakat yang dilakukan oleh Universitas Syiah Kuala. Selain memberikan solusi bagi transportasi dan pengelolaan sampah, desain becak listrik ini dapat menjadi model untuk pengembangan kendaraan listrik lainnya yang menggunakan energi terbarukan. Ini akan memberikan kontribusi penting dalam mengurangi dampak negatif perubahan iklim dan mengurangi ketergantungan pada sumber daya fosil di daerah tersebut.

Analisis Manajemen Risiko Logistik pada Perusahaan Third Party Logistic (3pl) dengan Metode Risk Breakdown Structure dan Failure Mode And Effect Analysis (Fmea) (Studi Kasus : Drop Point J&T Express Lambaro Kafe dan Syiah Kuala) Azizah, Nadiatul; Dirhamsyah, M.; Husni, Husni; Away, Yuwaldi; Hasanuddin, Iskandar
Jurnal Teknik Indonesia Vol. 4 No. 2 (2025): Jurnal Teknik Indonesia
Publisher : Publica Scientific Solution

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58860/jti.v4i2.624

Setiap aktivitas perusahaan, khususnya dalam logistik, pasti mengandung risiko yang dapat memengaruhi kelancaran operasional. Penelitian ini mengkaji manajemen risiko dalam kegiatan pengiriman barang di Drop Point J&T Express Lambaro Kafe dan Syiah Kuala, dua lokasi perusahaan Third Party Logistics (3PL) yang menghadapi berbagai tantangan operasional. Tujuan penelitian ini adalah untuk mengidentifikasi, menganalisis, dan mengevaluasi risiko menggunakan metode Risk Breakdown Structure (RBS) dan Failure Mode and Effect Analysis (FMEA). Penelitian ini mengidentifikasi 25 risiko di Lambaro Kafe dan 27 risiko di Syiah Kuala, yang dikelompokkan ke dalam lima kategori risiko. Berdasarkan perhitungan Risk Priority Number (RPN), ditemukan risiko prioritas tertinggi di masing-masing lokasi. Di Lambaro Kafe, risiko utama meliputi kehilangan barang, pengembalian bermasalah, dan kerusakan peralatan. Sedangkan di Syiah Kuala, risiko prioritas adalah kerusakan barang, kesalahan alamat, dan kerusakan kendaraan. Implikasi dari penelitian ini adalah perlunya pengelolaan risiko yang lebih efektif dan penerapan tindakan penanganan yang lebih sistematis untuk meningkatkan operasional dan kepuasan pelanggan di kedua lokasi. Rekomendasi tindakan meliputi perbaikan manajemen inventaris, pelatihan pekerja, dan peningkatan teknologi informasi untuk meminimalisir dampak risiko yang teridentifikasi.

University Students Stress Detection During Final Report Subject by Using NASA TLX Method and Logistic Regression Khairah, Alfita; Melinda; Hasanuddin, Iskandar; Asmadi, Didi; Arifin, Riski; Miftahujjannah, Rizka
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 9 No 3 (2025): June 2025
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29207/resti.v9i3.6401

Stress is a psychological response that occurs when someone faces pressure or demands that exceed their ability to adapt. In the context of a final-year student, stress is often a significant problem due to academic pressure, such as completing final assignments, as well as demands to immediately prepare to enter the workforce and demands to immediately prepare to enter the workforce. Research shows that stress that is not managed properly can cause various negative effects, such as sleep disorders and decreased cognitive function. This study aimed to identify and analyze stress levels among final-year students who completed a final report by integrating physiological and psychological data. In this study, 30 students were assessed using a wearable system to obtain physiological data, such as heart rate and body temperature, while subjective assessments were carried out using the NASA-TLX method to measure mental workload. The results showed that 19 out of 30 respondents experienced significant levels of stress and 11 respondents were in normal conditions, with the main causal factors including high academic pressure and distance regarding the future. In addition, the logistic regression analysis applied in this study succeeded in developing a predictive model with an accuracy of 94% in identifying students' stress conditions. This shows that this method is sufficiently accurate for detecting stress symptoms in final-year students.

Analysis of working posture of coffee bean milling operators to reduce musculoskeletal disorder risks using the OWAS and REBA method Mutia, Mutia; Iqbal, MT, Mohd; Hasanuddin, Iskandar
Jurnal Polimesin Vol 23, No 5 (2025): October
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v23i5.7184

Repetitive work involving lifting heavy loads over long distances and non-ergonomic working postures can lead to musculoskeletal disorders (MSDs). This problem is commonly found in coffee factories, particularly during the coffee bean grinding process, where two main activities are performed: the first is taking coffee beans from the ground, and the second is lifting the coffee beans to the grinding machine. The task of taking coffee beans from the ground involves a bent posture to collect them from a non-ergonomic coffee storage box. Meanwhile, in the task of lifting the beans to the grinding machine, workers must carry 25 kg of coffee over a distance of 8 meters. The purpose of this study was to evaluate work posture using the Ovako Working Posture Analysis System (OWAS) and Rapid Entire Body Assessment (REBA) methods. Six operators were observed at the coffee bean grinding station. The results show that three operators who perform the task of collecting beans from the ground received a category 3 score using the OWAS method, indicating that corrective action should be taken as soon as possible. In the task of lifting beans to the grinding machine, three operators received a score of 4 according to the OWAS method, also indicating that immediate corrective action is necessary. Based on the REBA method, three operators scored 10, classified as a high-risk level (action level 3), while the other three scored 11, indicating a very high-risk level. Based on these findings, it is necessary to provide ergonomic coffee storage boxes that accommodate workers’ posture in coffee factories and are easy to move according to the workers’ needs, to reduce the risk of musculoskeletal disorders.

Pelatihan Teknik Pengelasan dan Pengecatan Atomozing Bagi Santri Pesantren Anak Yatim Darul Hikmah Cot Yang-Kuta Baro Aceh Besar Akhyar; Sary, Ratna; Husaini; Khairil; Edhy, Sarwo; Tamlicha, Akram; Hasanuddin, Iskandar; Zulfan; Farhan, Ahmad
Kawanad : Jurnal Pengabdian kepada Masyarakat Vol. 3 No. 1 (2024): March
Publisher : Yayasan Kawanad

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56347/kjpkm.v3i1.206

Islamic boarding schools are traditional educational institutions that prioritize a religion-based curriculum. The Darul Hikmah Orphans Islamic Boarding School, located in Cot Yang Village, Kuta Barou District, Aceh Besar Regency, Aceh Province, faces the challenge of low levels of entrepreneurial skills in the field of welding and atomizing painting due to the absence of this material in their curriculum. To overcome this, atomizing welding and painting training was carried out at Islamic boarding schools, which aimed to improve students' hard skills in this field. This training is also planned to develop business units, including the establishment of atomizing welding and painting workshops. This atomizing welding and painting entrepreneurship training program is measured by several parameters, with the output being the basic welding technical skills obtained by the students. It is hoped that this program will produce entrepreneurs in atomizing welding and painting workshops that will benefit the environment of the Darul Hikmah Cot Yang Orphan Islamic Boarding School. The training implementation stages include welding and painting theory, occupational health and safety (K3), as well as practice and assistance in basic welding and painting, with the final product being a table. The training material was adopted from teaching welding and painting practices at Syiah Kuala Darussalam University-Aceh. The result of this training is an increase in participants' knowledge in welding and painting, as well as their ability to apply these processes by prioritizing K3 (Occupational Safety and Health).

Desain dan Analisis Artificial Exoskeleton pada Prajurit TNI Salam, Rudi; Iqbal, Mohammad; Hasanuddin, Iskandar
Jurnal Optimasi Sistem Industri Vol. 17 No. 2 (2018): Published in October 2018
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Soldier’s activities resulted in too much workload received by the body, especially in the back and waist. These conditions produce a high risk of musculoskeletal disorders especially if conducted continuously. The soldiers must carry a backpack containing supplies during training weighing up to 40 kg on average. All activities are conducted manually until the training is finish. Thus, the purposes of this study are to reduce spinal injury by identifying factors resulting from lifting loads that exceed the limits of the body, calculate the maximum load limit that can be carried by a soldier, and produce artificial exoskeleton as a tool for the Indonesian Armed Forces. The study used anthropometry, biomechanics, and physiological approach in solving the problem. The results show that the safe load can be carried by the soldiers is 30.46 kg. The body parts that feel the complaint are the upper neck, back, shoulder, buttocks. In addition, this study can produce a design of an artificial exoskeleton with the following dimensions: chest thickness 23 cm, chest width 32 cm, back length 52 cm. The soldiers can increase the force load by 9% of the initial weight of the load using this design.

Analyzing the Vibration Exposure to the Safety and Health at Workplace: A Case in the Urea Granulation Unit of the Fertilizer Factory Taufiq, Muhammad; Hasanuddin, Iskandar; Iqbal, Mohd; Erwan, Friesca
Jurnal Optimasi Sistem Industri Vol. 20 No. 2 (2021): Published in October 2021
Publisher : The Industrial Engineering Department of Engineering Faculty at Universitas Andalas

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/josi.v20.n2.p115-124.2021

This study aims to evaluate the vibration exposure experienced by workers in the Urea Granulation Screen Unit (UGSU) at the fertilizer factory in Aceh, Indonesia. This study involved 30 labors in charge as operators, mechanical maintenance officers, electrical maintenance officers, instrument maintenance officers, and inspectors. The measurement of vibration was carried out using a Triaxial Accelerometer with Integral Magnet and shows that the vibration exposure on the factory floor of the urea granulation screen unit occurs vertically with a minimum value of 0.298 m/s2 and a maximum of 1.630 m/s2. According to ISO 2631-1:1997, the maximum vibration values that occur are categorized as a likely health risk zone and result in uncomfortable reactions to the workers. Furthermore, this study analyzes the effect of vibrations on musculoskeletal problems using a Nordic Body Map (NBM) questionnaire. It reveals that the average score of musculoskeletal complaints is 71.6, which defines a high degree of pain. The results of the NBM questionnaire also showed that the vulnerable part of the body which experienced musculoskeletal complaints is the knee. The result of vibration exposure on this body part shows the highest value of 3.437 m/s2. To minimize occupational diseases and accidents, it is necessary to manage a working system that takes into account legal standards, ideal working time, and working shifts in the work area.

Title

Found 18 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 18 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 18 Documents
Search