Claim Missing Document
Check
Articles

Found 23 Documents
Search

ANALISIS LAJU PENDINGINAN BAHAN MAKANAN DALAM COOLBOX UNTUK PEMASARAN DENGAN WATER MISTING SYSTEM DI KOTA AMBON Leslie S Loppies; Eka Rahmat Mahayani Anthonio Putera Lilipaly
JURNAL SIMETRIK Vol 11, No 1 (2021)
Publisher : Pusat Penelitian dan Pengabdian Kepada Masyarakat (P3M) Politeknik Negeri Ambon

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31959/js.v11i1.620

Abstract

Food preservation can be done by using cooling system, however, the preservation used in Ambon traditional market is still the old ways of pouring cold water on the materials. The method caused many types of pollution such as smell, dirty puddle, and the damage of the road. By using a more effective and efficient cooling system, the food material is expected to be more clean, the market will be better and less damaged road. This will result in a happier customer and seller. The water misting system can keep the materials temperature at 10-15⁰C. The materials use is kale and fish. These materials can last all day and looked fresh. This system did not create pollution, dirty water puddle, and also consumed less water.
PENGGUNAAN FAN TYPE HOLOGRAM DENGAN SOLAR CELL SEBAGAI PILIHAN ALTERNATIF BILLBOARD DI KOTA AMBON Eka Rahmat Mahayani Anthonio Putera Lilipaly; Eka Adhitya Dharmawan
JURNAL SIMETRIK Vol 11, No 1 (2021)
Publisher : Pusat Penelitian dan Pengabdian Kepada Masyarakat (P3M) Politeknik Negeri Ambon

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31959/js.v11i1.621

Abstract

This research aimed to investigate the use of fan type hologram, that is considered to be a new technology, to replace conventional billboard. Billboard usage consumes plenty of energy and is not flexible. Fan type hologram is expected to reduce the electricity use and becomes more attractive to the general society. Prototype of the system build with solar cell as the source of energy, and battery as the storage. The energy from the sun is also measured to confirmed the energy supply is enough.The experiment showed that the initial cost for billboard is less expensive than the fan type hologram. On the other hand, the use of electricity of fan type hologram is much less than the billboard. It is also does not pay the monthly electricity bill, while conventional billboard needs to pay around Rp.252.000,- per month. 91.2% respondents agree for the replacement of the conventional billboard with fan type hologram.
Analisis Perbandingan Komposisi Karbon Dan Bubuk Tulang Sapi Dalam Proses Karburasi Padat Untuk Mendapatkan Nilai Kekerasan Tertinggi Pada Baja Karbon S-35 C Nevada J.M. Nanulaitta; Eka R. M. A. P. Lilipaly
ARIKA Vol 5 No 2 (2011)
Publisher : Industrial Engineering Study Program, Pattimura University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (293.536 KB)

Abstract

S-35 C, is a low steel carbon type with 0,30% - 0,35% carbon composition, which has a low hardness. This matter can be overcome by changing the hardness of this steel through heat treatment process. Heat treatment method used in this experiment is pack carburizing method. Experiment results showed that with composition of 500 g of carbon and 0% beef bones with 15 minutes holding time, the hardness number increased as much as 116.90 HRC, there was 20.54 HRC number increased. With 10% of cow bones composition, hardness number became 118.39 HRC and 20.40 HRC number increased. HRC number became 122.20 and increased by 24.38 on 20% composition, and on 30% the hardness value became 130.36 HRC, increased until 32.05 HRC number. 40% composition showed increasing hardness number up to 133.34 HRC, with 35.08 HRC increased. And 50% composition showed 141.29 HRC number, increased until 43.95 HRC. 50% composition produce the highest increase of hardness number, this verified that the higher composition of cow bones makes higher increasing of hardness number in a heat treatment process deliver a harder steel, and also prove that beef bones can be used as a catalyst in pack carburizing process.
Effect of Photosynthetic Pigment Composition of Tropical Marine Microalgae from Ambon Bay Navicula sp. TAD on Dye-Sensitized Solar Cell Efficiency Ivon Telussa; Eirene G. Fransina; Eka Rahmat Mahayani Anthonio Putera Lilipaly; Alfa Musa Imanuel Efruan
Science and Technology Indonesia Vol. 7 No. 4 (2022): October
Publisher : Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1970.154 KB) | DOI: 10.26554/sti.2022.7.4.486-491

Abstract

Solar cells using dyes as sensitizers continue to expand. The synthetic dye used as a sensitizing material for solar cells has high production costs, difficult to find, and can cause environmental pollution. Photosynthetic pigments as sensitizers are considered to be the solution to this matter. In this research, we investigated the effect of photosynthetic pigments from the Navicula sp. TAD as a dye-sensitized material on the efficiency of Dye-Sensitized Solar Cell. To obtain high biomass, the Navicula sp. TAD was cultivated in a modified medium. Pigment extract from dry biomass using acetone, then continued with purification of the pigment using column chromatography techniques. Characterization of pigment by scanning the absorption pattern of visible rays, the fabrication of solar cells with TiO2 paste, and the photographic test of the solar cells filled with solar simulators. Navicula sp. TAD has photosynthetic pigments consisting of chlorophyll and carotenoid with 8.570 gmL−1 and 2.581 gmL−1, respectively. Solar cells using pigment crude extract, chlorophyll, and xanthophyll which TiO2 absorbs as electrodes, have efficiency values of 6.150×10−4, 3.482×10−3, and 4.117×10−3%, respectively.
Penentuan Nilai Effisiensi Dye Sensitized Solar Cell dari Pigmen Fotosintesis Mikroalga Laut Tropis Navicula sp galur TAD Eka Rahmat Mahayani Anthonio Putera Lilipaly; Ivonne Telussa; Eirene G. Fransina; Alfa Musa Imanuel Efruan
JC-T (Journal Cis-Trans): Jurnal Kimia dan Terapannya Vol 6, No 2 (2022)
Publisher : State University of Malang or Universitas Negeri Malang (UM)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (357.53 KB) | DOI: 10.17977/um0260v6i22022p005

Abstract

Sel surya yang menggunakan pewarna sebagai sensitizer terus berkembang. Pewarna sintetis yang digunakan sebagai bahan sensitisasi sel surya memiliki biaya produksi yang tinggi, sulit ditemukan, dan dapat menyebabkan pencemaran lingkungan. Pigmen fotosintesis sebagai sensitizer dianggap sebagai solusi untuk masalah ini. Dalam penelitian ini, kami menyelidiki pengaruh pigmen fotosintesis dari Navicula sp. TAD sebagai bahan dye-sensitized pada efisiensi dye-sensitized solar cell. Untuk mendapatkan biomassa yang tinggi, Navicula sp. TAD dibudidayakan dalam media yang dimodifikasi. Navicula sp. TAD memiliki pigmen fotosintesis yang terdiri dari klorofil dan karotenoid. Sel surya menggunakan ekstrak pigmen kasar dengan konsentrasi 300 ppm yang diserap oleh TiO2 sebagai elektroda memiliki nilai efisiensi sebesar 4,475×10-4%.
EFISIENSI SOLAR DRYER UNTUK PENGAWETAN IKAN DAN PISANG Eka Adhitya Dharmawan; Eka Rahmat Mahayani Anthonio Putera Lilipaly
JURNAL SIMETRIK Vol. 13 No. 1 (2023)
Publisher : Pusat Penelitian dan Pengabdian Kepada Masyarakat (P3M) Politeknik Negeri Ambon

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31959/js.v13i1.1238

Abstract

Ikan dan pisang merupakan makanan yang banyak dikonsumsi oleh masyarakat Indonesia. Kapasitas produksi yang tinggi pada bahan makanan dan buah tersebut sering menyebabkan banyak yang terbuang. Terbuangnya bahan makanan ini dapat diatasi dengan metode pengawetan. Salah satu metode pengawetan yang dapat dilakukan adalah dengan cara pengeringan. Salah satu metode pengeringan yang efektif yaitu dengan menggunakan alat Solar Dryer. Penggunaan Solar Dryer berfungsi lebih baik dibandingkan dengan pengeringan langsung di bawah sinar matahari. Penelitian ini dimulai dengan pembuatan alat pengering, dan dilanjutkan dengan ujicoba proses pengeringan bagi pisang dan ikan. Ujicoba dilaksanakan selama (1) satu hari bagi masing-masing bahan, dan data diambil tiap 30 menit. Hasil penelitian menunjukkan efisiensi untuk pengeringan pisang adalah sebesar 12.2%, sementara untuk pengeringan ikan adalah sebesar 8.98%.
EFISIENSI WATER MISTING SYSTEM DALAM MEMPERTAHANKAN KUALITAS SAYUR Eka Rahmat Mahayani Anthonio Putera Lilipaly; Erwin Bravor Pattikayhatu; Edison Effendy
JURNAL SIMETRIK Vol. 13 No. 1 (2023)
Publisher : Pusat Penelitian dan Pengabdian Kepada Masyarakat (P3M) Politeknik Negeri Ambon

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31959/js.v13i1.1240

Abstract

Sayur yang biasanya dijual pada pasar-pasar swalayan dipajang  di  dalam lemari-lemari  pendingin atau diletakkan pada rak yang berada pada ruangan yang dingin dan memiliki sistem pendingin,  sedangkan di pasar-pasar tradisional sayur ini  hanya dihamparkan di atas meja-meja penjualan, sebagian lagi ditumpuk pada wadah-wadah yang bukan merupakan tempat penyimpanan sayur dan  tidak dilengkapi dengan alat pendingin. Penelitian sebelumnya menunjukkan bahwa kehilangan berat sayur dengan menggunakan sistem water misting dapat dipertahankan sebanyak 6.25% dari berat semula, dengan efisiensi alat pendingin water misting sebesar 61.47%. Penelitian ini diharapkan bisa mendapatkan metode baru terutama sistem kontrol yang dapat diaplikasikan  sesuai dengan kebutuhan manusia khususnya untuk pedagang sayur sehingga mempermudah pekerjaan dengan tidak lagi menyiram atau memercikkan air di atas sayur secara manual tetapi secara otomatis. Hasil penelitian menunjukkan bahwa efisiensi terbaik diperoleh pada waktu penyemprotan 7 menit dengan istirahat selama 2 menit sebesar 65.6%, lebih baik 4% dari penelitian sebelumnya.
EFFECT OF TIO2 WEIGHT ON THE EFFICIENCY OF DYE SENSITIZED SOLAR CELL (DSSC) USING NAVICULA SP. TAD MICROALGAE AS NATURAL DYE. SAMUEL M. TARIBUKA; EKA R.M.A.P LILIPALY; IVONNE TELUSSA
INTERNATIONAL JOURNAL OF MULTI SCIENCE Vol. 3 No. 05 (2023): INTERNATIONAL JOURNAL OF MULTISCIENCE - MAY - AUGUST 2023
Publisher : CV KULTURA DIGITAL MEDIA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Electricity requirements increase every year and have become a necessity for every household in the world. Alternative electricity sources will be required to handle the need. New and renewable energy (NRE) offer divers source on this issue; however, the development of these sources demands more exploration. DSSC or Dye Sensitized Solar Cell as the third generation of Solar Cell is one of the sources that can be explored. Using Microalgae as its dye is known to be an excellent choice for alternative natural dye. Navicula TAD, the original type of Microalgae found in Ambon Bay has been proven to be able to be a catalyst in electricity flow on DSSC. This research is investigating the effect of TiO2 paste weight on the efficiency of DSSC that uses Navicula TAD as the natural dye. Early studies showed that as the weight of TiO2 paste increases, the efficiency also increases. Using TiO2 weight of 0.1; 0.3 grams, the greatest efficiency is found in the DSSC with 0.3 grams of paste. The efficiency of DSSC with 0.3 grams of TiO2 paste is 17.02%.
Analisis Ketebalan Dinding Pelat Dan Sisa Umur Pada Tangki 11 – 15000kl Di PT. Pertamina Patra Niaga Integrated Terminal Wayame Kota Ambon Arun setiawan; Eka R. M. A. P. Lilipaly; Edison Effendi; Berthy Pelasula
Journal Mechanical Engineering Vol. 1 No. 3 (2023): Desember
Publisher : Jurusan Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31959/jme.v1i3.2102

Abstract

Abstrak Tangki penimbun (storage tank) merupakan salah satu peralatan yang sangat vital pada proses produksi industri perminyakan yang berfungi sebagai tempat penyimpanan dan penimbunan bahan cair, baik berupa minyak mentah, produk BBM, hasil minyak olahan, maupun bahan-bahan kimia lainnya. Korosi merupakan salah satu hal yang menjadi penghalang dalam sebuah proses penyimpanan terlebih lagi dalam fluida cair. Metode yang digunakan dalam pembahasan diawali dengan studi literatur dari berbagai referensi dan penelitian sebelumnya, kemudian pengambilan data lapangan dan kemudian dianalisa.. Dari hasil pengukuran yang diambil pada bulan september 2023, untuk kondisi Tangki 11-15000KL masih bagus ditandai dengan ketebalan course 1-8 masih diatas batas minimum yang sudah ditentukan. Untuk course 1 Tact sebesar 18,77 mm dengan Tmin sebesar 13,22 mm dengan laju korosi sebesar 0,15 mm/tahun dan sisa umur sebesar 37 tahun. Untuk course 2 Tact sebesar 15,84 mm dengan Tmin sebesar 11,81 mm dengan laju korosi sebesar 0,145 mm/tahun dan sisa umur sebesar 27 tahun. Untuk course 3 Tact sebesar 15,06 mm dengan Tmin sebesar 9,45 mm dengan laju korosi sebesar 0,07 mm/tahun dan sisa umur sebesar 80 tahun. Untuk course 4 Tact sebesar 13,17 mm dengan Tmin sebesar 8,17 mm dengan laju korosi sebesar 0,06 mm/tahun dan sisa umur sebesar 83 tahun. Untuk course 5 Tact sebesar 10,23 mm dengan Tmin sebesar 6,89 mm dengan laju korosi sebesar 0,07 mm/tahun dan sisa umur sebesar 47 tahun. Untuk course 6 Tact sebesar 9,55 mm dengan Tmin sebesar 5,61 mm dengan laju korosi sebesar 0,08 mm/tahun dan sisa umur sebesar 60 tahun .Untuk course 7 Tact sebesar 9,26 mm dengan Tmin sebesar 4,33 mm dengan laju korosi sebesar 0,08 mm/tahun dan sisa umur sebesar 63 tahun. Untuk course 8 Tact sebesar 9,50 mm dengan Tmin sebesar 2,54 mm dengan laju korosi sebesar 0,08 mm/tahun dan sisa umur sebesar 84 tahun Dapat disimpulkan kondisi Tangki 11-15000KL masih dalam kondisi baik. Kata kunci: Tangki timbun,minyak,laju korosi,sisa umur tangki,ketebalan tangki
ANALISIS KETEBALAN DAN SISA UMUR PAKAI PADA PIPA PENYALUR AIR RADIATOR MENUJU KE ENGINE DI PLTMG AMBON PEAKER 30 MW Away, Hyzkia; Effendy, Edison; Lilipaly, Eka R.A.P.
Journal Mechanical Engineering Vol. 2 No. 1 (2024): April
Publisher : Jurusan Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Ambon Peaker 30 MW. These pipes are prone to corrosion, especially if not protected by a coating, which leads to thickness reduction and shortens the operational lifespan of the pipes. The thickness measurement will be carried out using an Ultrasonic thickness gauge to determine the corrosion rate and the remaining life of the pipe. The standards referenced in data collection are the American Petroleum Institute (API) 570 and the American Society of Mechanical Engineers (ASME) B31.4. The research will be conducted by the author from August 28, 2024, to August 30, 2024, at PLTMG Ambon Peaker 30 MW, Salahutu District, Central Maluku Regency, Maluku Province. The research results show that the minimum thickness reduction indicates a corrosion rate of 0.228 mm/year at Thickness Measurement Location (TML) 17 and 18, while the maximum thickness reduction shows a corrosion rate of 0.564 mm/year at Thickness Measurement Location (TML) 3. Pipes with lower corrosion rates have a remaining life of 5.4 years, while pipes with higher corrosion rates have a remaining life of up to 31.9 years. In conclusion, coating protection is essential to reduce the corrosion rate and extend the service life of the pipes. Keywords: Pipe thickness, Corrosion rate, Pipe remaining life, Ultrasonic thickness gauge.