Claim Missing Document
Check
Articles

Found 39 Documents
Search

SIMULASI PENGARUH LITOLOGI TERHADAP MODEL SISTEM AKUIFER BEBAS ( Studi Kasus Kecamatan Tampan Kota Pekanbaru ) Juandi. M Juandi. M; Taufik Arianto; Usman Malik
Komunikasi Fisika Indonesia Vol 14, No 2 (2017)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (421.835 KB) | DOI: 10.31258/jkfi.14.2.1037-1040

Abstract

Telah dilakukan penelitian tentang simulasi pengaruh litologi terhadap model sistem akuifer bebas (studi kasus Kecamatan Tampan Kota Pekanbaru). Penelitian ini bertujuan untuk menganalisa pengaruh litologi terhadap model sistem akuifer bebas di Kecamatan Tampan Kota Pekanbaru menggunakan program komputer aplikasi MATLAB R2009a. Hasil penelitian diperoleh keluaran dari program komputer berupa kedalaman akuifer bebas atau nilai head hidrolik. Kedalaman akuifer bebas berkisar antara 2,187 meter sampai 8,2709 meter. Hasil penelitian juga memperlihatkan nilai transmisivitas dan storativitas yang besarnya adalah masing-masing 5175 m2 /hari dan 287,8 nilai tersebut adalah litologi kerikil, sedangkan nilai transmisivitas dan storativitas masing-masing adalah 2,3 m2 /hari dan 241,5 adalah litologi batu pasir halus.
PENGARUH LIMBAH INDUSTRI Pb DAN Cu TERHADAP KESETIMBANGAN SUHU DAN SALINITAS DI PERAIRAN LAUT KOTA DUMAI Riad Syech; Nia Audina; Usman Malik
Komunikasi Fisika Indonesia Vol 14, No 1 (2017)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (283.573 KB) | DOI: 10.31258/jkfi.14.1.981-985

Abstract

Telah dilakukan penelitian tentang “Pengaruh Limbah Industri Pb dan Cu Terhadap Kesetimbangan Suhu dan Salinitas di Perairan Laut Kota Dumai” dengan metode survei.Pengukuran suhu dan salinitas ditentukan pada tiga stasiun, yaitu Stasiun I Pelabuhan PT.KLK Dumai, Stasiun II Muara Sungai Mesjid dan Stasiun III Pelabuhan TPI Purnama Dumai selama 3 hari pengambilan sampel dan dilakukan pada pukul 13.00 sampai dengan 15.00 WIB secara serentak di tiga stasiun. Pengambilan sampel dilakukan untuk mengetahui suhu, salinitas dan kadar logam Pb dan Cu. Kadar logam Pb dan Cu diketahui dengan menggunakan alat Atomic Absorption Spectrophotometer atau AAS. Hasil penelitian untuk suhu, salinitas dan kadar logam berat Pb dan Cu tertinggi berturut-turut, yaitu 32°C, 37‰, 1,43 ppm dan 0,028 ppm. Kadar logam berat dan kondisi pasang surut mempengaruhi suhu dan salinitas sampel air laut.
PENGGUNAAN ENERGI SURYA UNTUK PENJERNIHAN AIR GAMBUT MENGGUNAKAN REFLEKTORCERMIN CEKUNG Usman Malik; Muksin '; Juandi M '
Komunikasi Fisika Indonesia Vol 13, No 13 (2016)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (520.766 KB) | DOI: 10.31258/jkfi.13.13.883-889

Abstract

Penelitian tentang destilasi air gambut telah dilakukan dengan menggunakan alat pemanas energi matahari reflektor cermin cekung dengan dua variasi wadah yang berbeda, masing-masing wadah terbuat dari aluminium, satu dicat dengan warna hitam dan yang lainnya tanpa dicat. Reflektor cermin cekung dibuat dengan ukuran diameter 2,2 meter, tinggi cermin 0,3 meter dan panjang fokusnya 1 meter. Reflektor diletakkan di atas tanah dan disinari langsung oleh cahaya matahari. Kolektor yang berisi sampel air gambut diletakkan diatas reflektor tepat pada posisi titik fokus. Selama pemanasan, suhu diukur setiap jam dengan waktu pengamatan mulai pukul 08.00 sampai 16.00 WIB. Pengamatan dilakukan selama empat belas hari, tujuh hari pertama yaitu pengamatan untuk wadah tanpa dicat dan tujuh hari kedua untuk wadah yang dicat hitam pada cuaca cerah. Hasil penelitian menunjukkan bahwa suhu maksimum sampel air gambut yang menggunakan wadah tanpa dicat adalah 89˚C, dan suhu maksimal pada titik fokus adalah 93˚C. Hasil volume destilasi air gambut tertinggi diperoleh 311 ml. Hasil pengamatan untuk destilasi pada wadah dicat hitam diperoleh suhu maksimal air gambut adalah 91˚C dan suhu maksimal pada titik fokusnya adalah 96˚C. Hasil volume destilasi air gambut tertinggi diperoleh 355 ml. Hasil pengujian laboratorium sampel air gambut sebelum destilasi terhadap parameter warna adalah 1368 Pt-Co dan pengujian laboratorium air gambut setelah di destilasi menjadi 65 Pt-Co, hal ini menunjukkan sampel setelah proses destilasi mengalami peningkatan kualitas yang sangat signifikan.
MODEL OF TERAHERTZ PULSE-BLOOD FLOW INTERACTION FOR OVERCOMING CHOLESTEROL PLAQUE VENTURI EFFECT IN ARTERY Usman Malik; Muhamad Hamdi
Komunikasi Fisika Indonesia Vol 11, No 9 (2014)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (310.285 KB) | DOI: 10.31258/jkfi.11.9.582-590

Abstract

This model attempts to analyze involvement using THz radiation interaction with cholesterol depositsform plaque on the inner walls of an artery. It interacts with blood fluid by principle of THz radiation heattransfer mechanism for overcoming cholesterol plaque venture effect in artery. Athermanous plaque, abuildup of white blood cell wherein is sometimes termed fatty, despite absence of adiposities depositswithin the wall of an artery. When cholesterol deposits form plaque on the inner walls of an artery, thevelocity of blood flow increases when t increases and generates higher pressure according to the ventureeffect. Consequences of this effect can lead to collapse the artery, causing a myocardial infarction in acoronary artery. Analysis on the cholesterol plaque effect in blood flow through the forced convection ofterahertz pulse heat release in artery causes the blood flow change after interacting with terahertz pulse.The results indicate that blood velocity and diffusivity for axial positions to higher with change oftemperature rises along radial position caused by heat release of the absorbed terahertz pulse power inblood flow. Transient behavior of a 10 THz pulse-blood flow interaction in artery wherein the resultchosen varies the blood kinematics viscosity to see how fast this final blood velocity profile is attained.Indeed, for very small blood kinematics viscosities, the response is slower. This result is to be expectedsince the blood kinematics viscosity unit is cm2/s just like the diffusion coefficient and the thermaldiffusivity.
KARAKTERISASI DIFFRAKSI SINAR-X (XRD) MATERIAL FERROELEKTRIK BARIUM TITANAT (BaTiO3) Rahmi Dewi; Krisman '; Usman Malik; Fauzan '
Komunikasi Fisika Indonesia Vol 10, No 7 (2013)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (407.023 KB) | DOI: 10.31258/jkfi.10.7.513-515

Abstract

Ferroelectric material Barium Titanat (BaTiO3) has been made with the comparison of 1:1from chemical reactionof Barium Carbonat (BaCO3) and Oxide Titanium (TiO2). The sample at pra-sinter at temperature of 400oC and printed in the form of pellets.The pellet were anneled with the temperature of 700oCand then characterized using XRD. The results of characterization using XRD was described on a graph between the intensity versus 2 theta angle. TheXRDresultsBaTiO3 before annelingdoes not show any peaks, this mean that the structure of BaTiO3before annelingis amorfus structure. The XRDresult BaTiO3 after annelingshowedsome peaks, the positions of the peaks on 2θ are 23.32°, 32.72°, 38.40o, 45.52o, 52.04°, 57.80o. After anneling, the peaks become wider, this mean the samples become crystaline in structure. At standard temperature (0oC to 320oC) the samples of BaTiO3 has tetragonal formbut on the temperature 700oC after being anneledit changed into Cubic.
PEMODELAN SATU SIKLUS RADIASI GELOMBANG TERAHERTZ PADA JARINGAN SAPI DENGAN METODE KOMPUTASI BIOFISIK Mimwindayani Mimwindayani; Mhd. Hamdi; Usman Malik
Komunikasi Fisika Indonesia Vol 14, No 1 (2017)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (562.085 KB) | DOI: 10.31258/jkfi.14.1.1013-1019

Abstract

Radiasi terahertz (THz) berada pada daerah inframerah pada spektrum elektromagnetik yang memiliki rentang frekuensi dengan nilai hampir sama dengan frekuensi molekul air. Interaksi radiasi THz mengindikasikan penyerapan hamburan rendah. Penelitian ini mengkaji model perambatan gelombang satu siklus radiasi THz pada jaringan biologis seperti: jaringan kulit, lemak, tumor, dan daging sapi dengan memfokuskan pada parameter-parameter fisis gelombang elektromagnetik Persamaan Maxwell. Solusi kajian ini menggunakan metode komputasi dengan perangkat lunak Wolfram Mathematica 9.0 menggunakan sumber densitas daya THz (10-150) mW.m-3 dan rentang frekuensi (0.1-1) THz. Kualitas spektrum penyerapan radiasi THz dibatasi oleh resolusi frekuensi dengan resonansi yang bervariasi. Pada resolusi rendah, puncak spektrum yang diperluas dengan tingkat energi dapat ditentukan dengan akurasi yang tinggi. Terdapat perbedaan dari puncak yang antara jaringan tumor dan jaringan normal. Hal ini dapat dilihat dengan model penyerapan dan hasil eksperimen mengindikasikan cukup akurat dengan kesalahan sebesar 0.8%.
SENSOR KOIL DATAR UNTUK ENGSEL ELEKTRONIK DENGAN ALGORITMA KOREKSI SUHU LINGKUNGAN Usman Malik; Lazuardi Umar; Widya Nora Nasution
Komunikasi Fisika Indonesia Vol 12, No 11 (2015)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (76.073 KB) | DOI: 10.31258/jkfi.12.11.701-706

Abstract

Telah dilakukan penelitian meggunakan sensor koil datar sebagai elemen pengindra terhadap pengembangan engsel elektronik untuk aplikasi rumah pintar. Dalam pengukuran ini jarak minimum yang diukur ialah 5 mm dan jarak maksimum 20 mm. penelitian ini dilakukan dengan suhu bervariasi yaitu 30C, 40C, 50C dan 60C. Nilai tegangan keluaran untuk suhu 30C hingga 60C berkisar antara 1,468 mV sampai dengan 2,863 mV. Hasil yang diperoleh ialah grafik dengan kurva berlapis. Dari hasil grafik dilakukan pemodelan menggunakan persamaan matematis. Dan hasil yang didapat ialah berupa persamaan umum yaitu ܷUo(d,0)=yo(0)+a(0)e^[-(b(0))d].
PREDIKSI VOLUME AKUIFER BEBAS DI KECAMATAN BUKIT RAYA DENGAN METODE BEDA HINGGA Muhammad Juandi; Muhammad syahputra syahputra; Usman Malik
JOURNAL ONLINE OF PHYSICS Vol. 3 No. 1 (2017): JOP (Journal Online of Physics) Vol 3 No 1
Publisher : Prodi Fisika FST UNJA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (526.498 KB) | DOI: 10.22437/jop.v3i1.5317

Abstract

A research about prediction of unconfined aquifer in Distrcit Bukit Raya have been done by using finite difference method. The depth of unconfined aquifer data using contour grid District Bukit Raya in 2015 solved numerically by using computer program MATLAB application R2009a version. The aim of this research was to analyze the effect of population growth on the volume of unconfined aquifer in District Bukit Raya. The result of the research could be informed to District Bukit Raya as follows : the total volume of underground water in 2017 in the amount of 10.399.615,33 m3 and in 2021 in the amount of 10.931.060,63 m3. the volume of underground water that taken by residents in 2017 were in the amount of 5.038.007,328m3and in 2021 were in the amount of 5.334.525,03 m3. The inreasing of lowering the volume of underground water (residue), so that in 2017 The inreasing of loweringthe volume of underground wateras much as5.361.608 m3and in 2021 as much as 5.596.535,6 m3. It can be concluded that the volume of underground waterinfluenced by the changes of the dept of aquifer and the large of green open space
EFEK VARIASI MASSA DAN ANALISA EFISIENSI BIOMASSA LIMBAH KAYU AKASIA DALAM PENGOLAHAN OPAK SINGKONG MENGGUNAKANKOMPOR BIOMASSA Juandi Juandi; Ray Afriando; Usman Malik
JOURNAL ONLINE OF PHYSICS Vol. 3 No. 2 (2018): JOP (Journal Online of Physics) Vol 3 No 2
Publisher : Prodi Fisika FST UNJA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1144.814 KB) | DOI: 10.22437/jop.v3i2.5365

Abstract

Has conducted research on “Variation Of Mass Effect and Analysis Of The Efficiency Biomass Accacia Timber Waste In Processing Cassavas Opak Using Biomass Stove” using the experimental method. The biomass stoves is using biomass energy from accacia timber waste as an energy source or fuel with a variety of mass 1200 grams, 1000 grams, and 800 grams. The observations were carried out for 60 minutes with intervals of 10 minutes each observation. The research results show that at mass 1000 grams obtained value temperature highest of 4630C. The average rate of heat energy is missing from the third variation mass 800 grams, 1000 grams, and 1200 grams receive is 514.439 Joule/s, and the average rate of energy heat elapsed of 29176.323 Joule/s with the water levels were lost during steaming of 6.046 %, and the average a mass of type the end of 60.287 kg/m3. The efficiency obtained with the values respectively of 99.542 %, 99.270 %, and 99.316 %.
SIFAT MAGNETIK DAN UKURAN PARTIKEL MAGNETIK SERTA KOMPOSISI MATERIAL PASIR BESI PANTAI KATA PARIAMAN SUMATERA BARAT DI SINTESA DENGAN IRON SAND SEPARATOR DAN BALL MILLING Salomo salomo; Erwin Erwin; usman malik; Sandra Utama Putra
JOURNAL ONLINE OF PHYSICS Vol. 3 No. 2 (2018): JOP (Journal Online of Physics) Vol 3 No 2
Publisher : Prodi Fisika FST UNJA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (155.512 KB) | DOI: 10.22437/jop.v3i2.5730

Abstract

Research on influence of Ball Milling time on magnetic properties composition and particle size of iron sand has been studied by Iron Sand Separator. The sampel was collected Kata beach Pariaman West Sumatera. Magnetic properties was studied using a solenoid wound with 2000 turns, length of 10 cm, and diameter 3 cm. Composition of the sample was studied by X-Ray Fluorescence, while particle size of the sample was studied by Particle Size Analyzer. The results showed that the size particle is 99,14 μm, 96,59 μm, and 93,34μm after processing by Ball Milling of 3, 5, and 7 hours respectively. The composition of the sample after being processed by Ball Milling of 7 hours is 12,2% and 47,387% respectively. More over, mass suseptibility of the sample increased after being processed by Ball Milling from 873,62 x 10-8 m3/Kg to 14.576,52 x 10-8 m3/Kg. These values are interval of ilmenite mineral (46 x 10-8 – 80.000 x 10-8) m3/Kg.