Claim Missing Document
Check
Articles

Sistem Komunikasi Suara Bawah Air dengan Metoda Simplex menggunakan Visible Light Communication (VLC) JAMBOLA, LUCIA; DARLIS, ARSYAD RAMADHAN; LIDYAWATI, LITA; HUSAENI, DZIKRI FACHRI
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 7, No 2 (2019): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v7i2.253

Abstract

ABSTRAKSistem komunikasi suara bawah air telah dikenal sejak lama, diantaranya sonar dan akustik. Seiring perkembangan zaman dan kemajuan teknologi, kini hadir komunikasi dengan media transmisi cahaya tampak yaitu Visible Light Communication (VLC) yang dapat diterapkan pada komunikasi bawah air. Pada penelitian ini telah dilakukan komunikasi suara bawah air (simplex) menggunakan VLC, dengan media akuarium berisi air dan beberapa pengujian diantaranya menggunakan color filter, didapat hasil pengujian terbaik yaitu tegangan 4,4 Vpp dan frekuensi 3,003 kHz untuk color filter yellow, pengujian menggunakan lensa didapat hasil pengujian terbaik yaitu tegangan 4,4 Vp-p dan frekuensi 3,051 kHz untuk lensa (+50), dan pengujian terakhir menggunakan lampu UV didapat hasil pengujian terbaik dengan tegangan 4,4 Vp-p dan frekuensi 3,010 kHz. Implementasi sistem VLC ini menunjukkan hasil yang baik dan layak untuk diterapkan pada komunikasi suara bawah air (simplex).Kata kunci: VLC, Komunikasi Suara Bawah Air, Simplex. ABSTRACTUnderwater voice communication systems have been known for a long time, including sonar and acoustics. Along with the development and advancement of technology, now there is communication with visible light transmission media, namely Visible Light Communication (VLC) which can be applied to underwater communication. Under this study underwater voice communication (simplex) has been carried out using VLC, with aquarium media containing water and several tests including using a color filter, the best test results obtained are voltage 4.4 Vp-p and frequency 3.003 kHz for yellow color filter, testing using the lens obtained the best test results namely voltage 4.4 Vp-p and frequency 3.051 kHz for lenses (+50), and the last test using UV lights obtained the best test results with a voltage of 4.4 Vp-p and a frequency of 3.010 kHz. The implementation of the VLC system shows good and feasible results to be applied to underwater voice communication (simplex).Keywords: VLC, Underwater Voice Communication, Simplex.
Implementasi Filter Finite Impulse Response (FIR) Window Hamming dan Blackman menggunakan DSK TMS320C6713 LIDYAWATI, LITA; RAHMIATI, PAULINE; SUNARTI, YULI
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 4, No 1 (2016): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v4i1.16

Abstract

ABSTRAKFilter didefinisikan sebagai proses atau rangkaian yang melewatkan pita frekuensi tertentu yang diinginkan dan meredam pita frekuensi lainnya. Salah satu metode perancangan filter digital Finite Impulse Response (FIR) adalah metode windowing. Dalam penelitian ini digunakan jenis window Hamming dan Blackman. Simulasi dilakukan dengan menggunakan software Matlab dengan memasukan frekuensi passband, frekuensi stopband, ripple passband, dan stopband attenuation. Dengan frekuensi sampling sebesar 15000 Hz, frekuensi passband sebesar 3000 Hz, frekuensi stopband sebesar 5000 Hz. Setelah simulasi dilakukan implementasi filter dengan parameter yang sama menggunakan DSK TMS 320C6713 dengan bantuan software CCS. Simulasi dan implementasi dilakukan pada semua band frekuensi. Hasil pengujian terhadap implementasi filter adalah respon magnitude, frekuensi cut-off, bandwidth, dan faktor kualitas dengan hasil simulasi tidak menunjukkan perbedaan yang signifikan.Kata kunci: filter digital, windowing, Hamming, Blackman, frekuensi cut-off.ABSTRACTFilter is defined as a process or series that skip certain desired frequency band and other frequency bands drown. One method of designing a digital filter Finite Impulse Response (FIR) is a windowing method. This study used the type of window Hamming and Blackman. Simulations performed using Matlab software by inserting a frequency passband, stopband frequency, passband ripple, and stopband attenuation. With a sampling frequency of 15,000 Hz, a frequency of 3000 Hz passband, stopband frequency of 5000 Hz. After the simulation is completed, implementation of the filter with the same parameters using TMS 320C6713 DSK with the help of software CCS. Simulation and implmentasi performed on all frequency bands. The test results of the implementation of the filter is the Magnitude response, the cut-off frequency, bandwidth, and quality factor with simulation results showed no significant difference.Keywords: digital filter, windowing, Hamming, Blackman, cut-off frequency.
AN ANALYSIS OF DISTANCE EXTENSION METHOD IN VISIBLE LIGHT COMMUNICATION (VLC) PERFORMANCE KRISTIANA, LISA; DARLIS, ARSYAD RAMADHAN; DEWI, IRMA AMELIA; LIDYAWATI, LITA; ARCHANDHIKA, HEGAR REFALDY
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 8, No 1 (2020): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v8i1.218

Abstract

ABSTRAK A Visible Light Communication (VLC) adalah teknologi yang menawarkan konsep inovatif karena VLC menerapkan cahaya tampak untuk mentransmisikan informasi dari satu titik ke titik lain. Tantangan utama dalam penerapan VLC adalah pelemahan sinyal cahaya tampak karena faktor jarak dari titik sumber ke titik tujuan. Penelitian ini berfokus pada metode untuk merancang dan menerapkan pemancar dan penerima VLC pada media udara. Dengan membandingkan berbagai macam tipe LED, pengukuran yang didapatkan menunjukkan bahwa pemancar dan penerima VLC dapat ditingkatkan kemampuannya sehingga mencapat jarak maksimum 8.5 meter dengan menggunakan LED HPL. Kata kunci: Visible Light Communication, VLC Transceiver, Distance Extension Method, Light Emitting Diodes (LEDs). ABSTRACT A Visible Light Communication (VLC) offers the innovative concept in telecommunication since it implements visible lights to transmit information from one point to other points. The main challenge in VLC is the attenuation due to the distance from source to destination. This research focuses on extension method to design and implement the VLC transceiver in an air medium. By comparing the real measurement of several types of LEDs, the distance of VLC transceiver can be extended up to 8.5 meters by applying HPL LED. Keywords: Visible Light Communication, VLC Transceiver, Distance Extension Method, Light Emitting Diodes (LEDs).
Implementasi Sistem SMS Gateway untuk Kendali Air Conditioner DERI, GEMA ALFARISI; M.ICHWAN, M.ICHWAN; LIDYAWATI, LITA
REKA ELKOMIKA Vol 1, No 2 (2013)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (386.624 KB)

Abstract

ABSTRAK Dalam suatu ruang server, pengaturan suhu sangatlah penting. Dimana dalam ruangan tersebut suhu harus tetap terjaga agar selalu dingin sekitar 20-25 derajat celcius. Keterbatasan sebuah AC dalam mengatur suhu pada ruang server untuk terus aktif dalam 24 jam tentu menjadi kendala tersendiri dimana membuat AC tersebut menjadi cepat rusak. Untuk mengatasi hal tersebut digunakan beberapa AC dalam suatu ruang server. Untuk menghemat energi dan biaya dari listrik yang digunakan, melalui integrasi dari SMS (Short Message Service) dan dengan hardware serta software yang digunakan, dihasilkan ide untuk merancang remote AC dengan SMS gateway berbasis mikrokontroler ATMEGA 16. Perancangan ini dilakukan untuk dapat mengaktifkan atau mengnonaktifkan satu atau beberapa AC secara bergantian dari jarak jauh. Ada tiga pengujian yang dilakukan, yaitu pengujian pertama mengirim perintah SMS dengan Format yang benar dan salah. Percobaan kedua mengirim sms dengan nomor yang tidak masuk dalam pengaturan.Pengujian ketiga menghitung lama waktu akses pada saat mengirim perintah hingga user menerima sms balasan bahwa AC telah aktif atau tidak. Dihasilkan waktu akses tercepat 6,756 detik dan waktu akses terlama 8,012 detik. Kata Kunci : Ruang server, SMS, AC ABSTRACT In the server room, the temperature setting is very important. Where in the room temperature must be maintained to keep it cool around 20-25 degrees Celsius.  Limitations of an air conditioner in regulating the temperature in server room to continue being active in the 24 hours of course became an obstacle which makes air conditioner became easily damaged. To solve this problem use some air conditioning in the server room. To save energy and cost of electricity used, through the integration of SMS (Short Message Service) and the hardware and software used, generated the idea to design a remote AC with SMS gateway based microcontroller ATMEGA 16. The design was conducted to be able to activate or turn off the air conditioner one or alternately from long distance. There are three tests, the first test sending an SMS with the Format command is right and wrong. The second experiments sending sms to a number that is entered in the settings. Testing the three calculate long access time when sending commands to the user receives a SMS reply that the air conditioner was on or not. Resulting the fastest access time access time of 6.756 seconds and 8.012 seconds longest. Keywords : Server Room, SMS, AC
Simulasi dan Analisis Probabilitas Blocking Jaringan Sistem Komunikasi Serat Optik ITENAS berbasis WDM MUKHTARETA, RAISA; JUHANA, TUTUN; LIDYAWATI, LITA
REKA ELKOMIKA Vol 2, No 1 (2014)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (518.087 KB)

Abstract

Abstrak Terus terjadi peningkatan jumlah pengguna jaringan komunikasi di ITENAS. Wavelenght Division Multiplexing(WDM) merupakan solusi untuk mengakomodasi pertumbuhan trafik global dengan mengurangi batasan dalam pengaturan koneksi atau menurunkan probabilitas blocking. Tujuanpenelitian ini mensimulasikan dan menganalisaisprobabilitas blocking jaringan serat optik ITENAS yang memiliki 8 node, 26 link dan 13 kanal terhadap jumlah node, menggunakan teknologi WDM yang terintegrasi dengan sistem WDM pada Matlab R2013a. Penelitian dilakukan untuk beberapa kondisi,yaitu conversion, full conversion, limited conversion, no conversion, no conversion firts-fit, dan no conversion random.Berdasarkan hasil simulasi didapatkan probabilitas blocking maksimum 82% untuk jaringan dengan full conversion dan probabilitas blockingminimum 0% untuk jaringan no conversion first-fit. Kata kunci: Matlab R2013a, WDM, probabilitas blocking, konversi, dan kanal. Abstract The number of users atITENAS communication network continuallyincrease.The Wavelength Division Multiplexing (WDM) solution to accommodate global traffic growth by reducing restrictions in setting up a connection or decreasing the blocking probability. The purpose of this research was simulating and analyzing the blocking probability of ITENAS optical fiber networks which had 8 nodes, 26 links and 13 channels compared to the number of nodes, using the WDM technologyintegratedWDMsysteminMatlabR2013a. The researchwas conducted some conditions, conversions, fullconversions, limitedconversions, noconversion, noconversionfirts-fit, andnoconversionrandom. The simulation resultsbased onobtainedmaximumblockingprobability82% fora networkwithfullconversionandthe minimumblocking probability0% fora networkwithnoconversionfirst-fit. Keywords:Matlab R2013a, WDM, blocking probability, conversion, and channel.
Analisis Benchmarking Jaringan 3G Operator HCPT dan XL di Area Jakarta SARI, ANITA PURNAMA; LIDYAWATI, LITA; DARLIS, ARSYAD RAMADHAN
REKA ELKOMIKA Vol 1, No 2 (2013)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (730.1 KB)

Abstract

Abstrak Jumlah pengguna teknologi telekomunikasi yang bertambah bisa menjadi penyebab menurunnya kualitas layanan. Hal ini membuat operator harus menjaga kinerja jaringan dengan cara drive test dan mengoptimasi jaringan secara rutin. Analisis data untuk mengetahui penyebab masalah yang terjadi dan solusi untuk mengatasi penurunan kualitas jaringan. Pada penelitian ini, dilakukan benchmarking (perbandingan) antar 2 operator 3G yaitu HCPT dan XL di daerah Jakarta dengan pembagian 3 rute, dan parameter pembanding yaitu RSCP (Receive Signal Code Power), Ec/No (Energy Chip per Noise), Call Setup Success Ratio (CSSR) dari perbandingan call attempt dan call setup, Call Drop Ratio (CDR) dari perbandingan call attempt dan call drop, Call congestion ratio (CCR) dari perbandingan call attempt dan block call. Dari hasil pengukuran, pada operator HCPT persentase RSCP  terbaik (-74 s/d 0 dBm) yaitu 61%, 70% dan 81%, persentase Ec/No terbaik (-6 s/d 0 dB) yaitu 49%, 28%, dan 40%, CSSR sebesar 99.14%, CDR 0%, dan CCR 0%. Sedangkan operator XL persentase RSCP terbaik 36%, 36%, dan 55%, persentase Ec/No terbaik 48%, 28%, dan 35%, CSSR 99%, CDR 2%, dan CCR 0.99%. Kata kunci: kinerja jaringan, 3G, benchmarking. Abstract The increasing of telecommunication technology users could be cause of decreasing the quality of service. This make operators have to maintain performance with drive test and optimizing the networks regularly. Data analizing to determine caused of the problems occured and solution to solve the decreasing of network quality problems. This research, would be benchmarking (compare) two 3G operators, HCPT and XL in Jakarta with 3 routes, and comparison parameters were RSCP (Received Signal Code Power), Ec/No (Energy Chip per Noise), Call Setup Success Ratio (CSSR) from compared call setup and call attempt, Call Drop Ratio (CDR) from compared call setup and call drop, Call congestion ratio (CCR) from compared call attempt and call block. From the measurement result, the best percentage of RSCP in HCPT (-74 to 0 dBm) were 61%, 70% and 81%. The best percentage of Ec/No (-6 to 0 dB) were 49%, 28%, and 40%, CSSR were 99.14%, CDR 0%, CCR 0%. For XL, the best percentage of RSCP were 36%, 36%, and 55%, percentage of Ec/No were 48%, 28%, and 35%, CSSR 99%, CDR 2% and CCR 0.99%. Keywords: network performance, 3G, benchmarking.
Analisis Perhitungan dan Pengukuran Transmisi Jaringan Serat Optik Telkomsel Regional Jawa Tengah PRAJA, FAZAR GUNTARA; ARYANTA, DWI; LIDYAWATI, LITA
REKA ELKOMIKA Vol 1, No 1 (2013)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Abstrak Serat optik merupakan media transmisi yang banyak digunakan untuk jaringan local. Pada serat optik untuk media transmisi terdapat beberapa macam rugi-rugi seperti rugi-rugi penyerapan, rugi-rugi pada inti dan cladding, rugi-rugi penyambungan dan rugi-rugi konektor. Pengujian jaringan dilakukan pada panjang gelombang λ= 1310 nm dan λ=1550 nm. Perancangan transmisi jaringan serat optik Telkomsel Regional JawaTengah terbentang diantara Kota Bawen-Payaman yang terdiri dari empat link. Pengukuran dilakukan pada power link budget dan rise time budget dengan ketentuan standar KPI (Key Performance Indicator) Telkomsel yaitu untuk power link budget sebesar – 4 dBm dan rise time budget 70 ps. Hasil pengukuran link jaringan diperoleh nilai power link budet rata-rata sebesar -0,33 dBm dan rise time budget rata-rata sebesar 45,76 Ps, yang mengindikasikan seluruh link yang telah dibangun memiliki kinerja yang baik dan sesuai dengan standar minimal yang diinginkan Telkomsel. Kata kunci: serat optik, OTDR, power link budget, rise time budget. Abstract Fiber optics is a transmission medium that is widely used for the local network. In fiber optics for transmission media, there are several kinds of losses such as absorption losses, losses in the core and cladding, switching losses and connector losses. Tests carried out at a wavelength network λ = 1310 nm and λ = 1550 nm. Design of fiber-optic transmission network stretching between the Central Java Regional Vodacom Bawen-Payaman City consisting of four links. Measurements were taken on the power link budget and rise time budget with the provisions of the standard KPI (Key Performance Indicator) Telkomsel is for power link budget at ≤ - 4 dBm and rise time budget ≤ 70 ps. The measurement results obtained by the network link budet link power value by an average of -0,33 dBm and rise time budget by an average of 45,76 Ps, indicating all links that have been built have performed well and in accordance with the desired minimum standards Telkomsel.   Key words: Fiber optics, OTDR, power link budget, rise time budget
Perancangan dan Analisis Kinerja Sistem Pencegahan Penyusupan Jaringan Menggunakan Snort IDS dan Honeyd PUTRI UTAMI, AGITA SYAIMI; LIDYAWATI, LITA; RAMADHAN, ZUL
REKA ELKOMIKA Vol 1, No 4 (2013)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (839.593 KB)

Abstract

ABSTRAK Kelemahan sistem keamanan jaringan akan dimanfaatkan oleh penyusup (intruder) untuk melakukan serangan dengan cara mencuri data dan merusak jaringan komputer. Pada penelitian ini dilakukannya pencegahan penyusupan menggunakan Snort IDS dan Honeyd. Snort IDS ini bekerja dengan cara mendeteksi serangan yang telah dilakukan oleh penyusup (intruder). Setelah serangan berhasil terdeteksi, maka serangan tersebut akan dibelokkan ke server palsu (Honeyd). Akibat dari serangan penyusup adalah terjadinya gangguan pada sisi sistem kinerja server. Begitupula pada pemakaian CPU history adanya peningkatan kapasitas server 94,1% ketika terjadi serangan. Akan tetapi setelah terjadinya pembelokan, kapasitas server menurun menjadi 47,4%. Setelah dilakukan proses pendeteksian dan pembelokan maka sistem sudah bekerja dengan baik untuk mengamankan suatu jaringan komputer. Kata kunci : CPU history, Honeyd, kinerja sistem, penyusup, Snort IDS. ABSTRACT A disadvantage of network security system will be utilized by the intruders to carry out attacks in a way to steal data and destroy the computer network. In this research , it was conducted the prevention to detect attack using Snort IDS and Honeyd methods. The Snort IDS worked by using an attack detection that conducted by intruder. After attack detection, it would be moved to the fake server (Honeyd). The results of the intruder attack were the interference on the performance of server side system. Similarly, the CPU usage history would increase. In the event of attack, the state of the server would increase to 94.1%, but after bending state of server, it would decrease to 47.4%. After detection and deflection processes, the system would work back into the normal condition for securing the computer network. Keywords : CPU history, Honeyd, , Intuder, system performance, Snort IDS.
Implementasi Sistem Komunikasi Video menggunakan Visible Light Communication (VLC) DARLIS, ARSYAD RAMADHAN; LIDYAWATI, LITA; JAMBOLA, LUCIA; WULANDARI, NURUL
REKA ELKOMIKA Vol 2, No 3 (2014)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (484.09 KB)

Abstract

ABSTRAK Visible Light Communication (VLC) adalah sebuah sistem komunikasi yang memanfaatkan cahaya tampak sebagai media dalam komunikasi antar perangkat. Pada penelitian ini,  teknologi Visible Light Communication (VLC) dalam sistem komunikasi yang akan diimplementasikan ini informasi yang akan dikirim  berupa video. Metodologi penelitian yang digunakan dengan cara mentransformasikan Informasi digital  menjadi sinyal analog oleh modulator, kemudian diubah menjadi cahaya oleh lampu sehingga cahaya lampu mengandung informasi. Selanjutnya cahaya tersebut diterima oleh photodiode yang akan mengubah menjadi sinyal listrik. Sinyal listrik yang berupa sinyal analog tersebut diubah kembali menjadi informasi digital kembali oleh demodulator setelah sebelumnya dikuatkan terlebih dahulu. Dengan adanya penelitian ini, manusia dapat berkomunikasi atau bertukar informasi hanya dengan cahaya lampu. LED dapat mengirimkan sebuah informasi berupa video (gambar bergerak) yang akan diterjemahkan kembali oleh photodiode. Pada penelitian ini hasil gambar video yang tampak pada monitor yang dikirim melalui transmitter dengan menggunakan LED belum sempurna, hal ini disebabkan oleh faktor pemilihan LED dan photodiode yang belum sesuai untuk mengirimkan data sepenuhnya. Gain pada sistem transceiver memiliki rata-rata sebesar 7,78 dB. Dengan rata-rata faktor delay pembacaan frekuensi sebesar 17,49 µs. Kata Kunci : LED, Transceiver, Video, Cahaya Tampak ABSTRACT Visible Light Communication (VLC) is a communication system that utilizes visible light as a medium of communication between devices. In this study, technological Visible Light Communication (VLC) in a communication system that will be implemented this information to be sent in the form of video. The research methodology used to transforming the way digital information into an analog signal by the modulator, then converted into light by the light bulbs so that the information it contains. Furthermore, the light received by the photodiode which will convert it into electrical signals. Electrical signal in the form of analog signals are converted back into digital information returned by the demodulator after previously strengthened first. Given this research, humans can communicate or exchange information only with light. LEDs can transmit information in the form of a video (moving pictures) that will be translated back by a photodiode. In this study the results of video images that appear on the monitor that is sent through the transmitter by using LED is not perfect, this is caused by a factor in choosing the LED and photodiode are not suitable to transmit the data completely. Gain on transceiver system has an average of 7.78 dB. With an average delay factor frequency of 17.49 µs. Keywords: LED, Transceiver, Video, Visible Light
Perancangan dan Implementasi Sistem Komunikasi Laser Berdaya 1 mW BANGUN, JAPE ATHAN; LIDYAWATI, LITA; DARLIS, ARSYAD RAMADHAN
REKA ELKOMIKA Vol 1, No 3 (2013)
Publisher : REKA ELKOMIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (287.165 KB)

Abstract

Abstrak Perkembangan teknologi telah menunjukkan peningkatan yang cukup signifikan, terutama untuk bidang komunikasi. Ini terbukti dengan banyaknya media komunikasi baik itu nirkabel maupun kabel. Pada penelitian ini digunakan cahaya sebagai media sistem komunikasi, selain fungsi cahaya sebagai penerangan. Pada penelitian ini direalisasikan prototype sistem komunikasi Laser yang memanfaatkan fungsi cahaya dari Laser untuk menjadi sistem komunikasi. Prototype sistem komunikasi laser ini terdiri dari pemancar dan penerima. Pemancar terdiri dari Laser, transformator audio dan batere. Sedangkan penerima terdiri dari photodioda, amplifier dan catu daya. Metode yang digunakan dalam pengukuran adalah metode Line of Sight (LOS) pada saluran terbuka dan saluran tertutup. Parameter yang dapat mempengaruhi hasil output sistem komunikasi adalah jarak dan cahaya luar, karena semakin jauh jarak tempuh Laser maka semakin kecil intensitas cahaya yang diterima receiver. Hasil yang diperoleh dari pengukuran transmisi bahwa pada kondisi siang hari sistem komunikasi laser yang dirancang dapat bekerja pada jarak 5 meter sedangkan pada malam hari bekerja pada jarak 10,5 meter. Kata kunci: laser, Sistem komunikasi, Line of Sight, prototype. Abstract The development of technology  was have shown a significant increase, especially for the communication field. This evidenced by the number of communication media both wireless and wired. Thus in this research, the utilized light as a medium of communication systems was applied to the light as illumination. This research will be realized the prototype of laser communication system. Prototype of laser communication system consisted of a transmitter and a receiver. The transmitter consisted of a laser, audio transformer and batere. While the receiver consisted of photodioda, amplifier and power supply. The used method in this measurement was Line of Sight (LOS) in the open channel and the closed channel. The parameters those could affect the output of the communication system were distance and outside light, because the farther the distance, the smaller the laser light intensity that received by the receiver. The result obtained from transmission measurements in a day condition,was the laser communication system that could work in 5 meters while in the night work was in 10,5 meters. Keywords: laser, Communication systems, Line of Sight, prototype.