Widya Krestina, Luqman Hakim, Dyah Ayu Pramoda Wardani,
Fakultas Matematika Dan Ilmu Pengetahuan Alam, Universitas Palangka Raya, Jalan Yos Sudarso, Palangka Raya, Kalimantan Tengah

Published : 5 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 5 Documents
Search

PENGARUH VARIASI WAKTU PAPARAN GELOMBANG ULTRASONIK DALAM MENGURANGI JUMLAH BAKTERI COLIFORM PADA SAMPEL AIR SUNGAI KAHAYAN Sunariyati, Neny Kurniawati, Kerelius,; Widya Krestina, Luqman Hakim, Dyah Ayu Pramoda Wardani,; Diah K. Fatmala, Dwi Tyas Setiawan, Ferry Purwanto,
Risalah Fisika Vol 4, No 1 (2020): Risalah Fisika ISSN 2548-9011
Publisher : Physical Society of Indonesia (PSI)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35895/rf.v4i1.168

Abstract

Abstrak ? Penelitian ini bertujuan untuk mengkaji pengaruh waktu paparan gelombang ultrasonik terhadap pengurangan jumlah koloni bakteri coliform pada sampel air sungai Kahayan. Pengambilan sampel air sungai dilakukan dengan teknik Grab Sampling menggunakan alat Kemmerer Sampler. Sampel air yang didapatkan diberikan paparan gelombang ultrasonik secara langsung, tanpa merubah kondisi lingkungan awal. Waktu paparan divariasikan pada 1 jam, 2 jam, 3 jam, 4 jam, dan 5 jam dengan frekuensi 40 kHz untuk memperoleh data waktu optimum. Uji coliform dilakukan dengan metode MPN, dengan tahapan uji pendugaan, uji penegasan, dan perhitungan koloni. Hasil uji MPN 24 jam setelah paparan menunjukkan bahwa penggunaan ultrasonik sebagai antibateri dapat optimum ketika diberikan paparan dengan waktu 3 jam, dengan efisiensi  96%. Kata kunci: antibakteri, coliform, ultrasonik, water treatment, sungai Kahayan  Abstract ? This study aims to examine the effect of ultrasonic wave exposure time on reducing the number of coliform bacterial colonies in the Kahayan river water samples. River water sampling is done using the Grab Sampling technique using the Kemmerer Sampler tool. The water samples obtained were given direct ultrasonic wave exposure, without changing the initial environmental conditions. The exposure time is varied in 1 hour, 2 hours, 3 hours, 4 hours and 5 hours with a frequency of 40 kHz to obtain optimum time data. Coliform test was carried out by the MPN method, with the stages of the estimation test, affirmation test, and colony calculation. The MPN test results 24 hours after exposure showed that the use of ultrasonic as an antibody can be optimum when given exposure with a time of 3 hours, with an efficiency of 96%.Keywords : antibakterial, coliform, ultrasonic, water treatment, Kahayan river
GAYA HIDUP BERSIH DENGAN MENCUCI TANGAN SEBAGAI UPAYA UNTUK MENCEGAHAN PENULARAN COVID 19 DI KOMUNITAS MUSLIMAH KOTA PALANGKA RAYA Erwin Prasetya Toepak; Rendy Muhamad Iqbal; Dyah Ayu Pramoda Wardani; Sari Namarito Simamarta; Elda Alyatikah
LOGISTA - Jurnal Ilmiah Pengabdian kepada Masyarakat Vol 4 No 2 (2020)
Publisher : Department of Agricultural Product Technology, Faculty of Agricultural Technology, Universitas Andalas Kampus Limau Manis - Padang, Sumatera Barat Indonesia-25163

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25077/logista.4.2.611-614.2020

Abstract

Virus Corona menyebabkan infeksi gangguan pernafasan serius yang dapat menyebabkan kematian. Berdasarkan data yang dipublikasikan oleh Kementerian Kesehatan Republik Indonesia, Kota Palangka Raya merupakan wilayah dengan kasus pasien terkonfirmasi positif terbesar sebanyak 145 orang dengan jumlah kematian sebesar 8 orang pertanggal 5 Juni 2020. Penyebaran virus, termasuk virus korona, sebesar 98% bersumber dari tangan. Oleh sebab itulah dengan rajin mencucui tangan maka dapart mencegah dan memutus rantai penyebaran virus korona. Jikalau tidak terdapat sabun dan air mengalir, maka dapat menggunakan hand sanitizer seperti yang dianjurkan oleh Centers for Disease Control and Prevention (CDC) Amerika Serikat. Berdasarkan hal itu, maka kegiatan mempromosikan penggunaan hand sanitizer perlu dilakukan. Kegiatan masyarakat yang telah dilaksanakan ini dilakukan melalui pemberian hand sanitizer dan informasi ringkas tentang kebiasaan mencuci tangan yang praktis pada komunitas muslimah Kota Palangka Raya. Hasil dari kegiatan ini diharapkan dapat memberikan sumbangsih mencegah infeksi COVID 19. Kata kunci: COVID 19, Hand Sanitizer, Palangka Raya, Hidup Bersih, Komunitas Muslimah ABSTRACT Corona virus causes serious respiratory infections that can lead to death. Based on data published by the Ministry of Health of the Republic of Indonesia, Palangka Raya City is the region with the largest positive confirmed cases of 145 people with 8 deaths as of June 5, 2020. The spread of viruses, including the corona virus, is 98% sourced from hands. That is why diligently washing hands can prevent and break the chain of spreading the corona virus. If soap and running water are not available, a hand sanitizer can be used as recommended by the US Centers for Disease Control and Prevention (CDC). Based on this, activities to promote the use of hand sanitizers need to be carried out. This activity that has been carried out is carried out through the provision of hand sanitizers and brief information about practical hand washing habits in the Muslim community of Palangka Raya City. It is hoped that the results of this activity can contribute to preventing COVID 19 infection. Keywords: COVID 19, Hand sanitizer, Palangka Raya, Clean living, Muslimah community
INVESTIGASI SIFAT MAGNET DAN LUAS PERMUKAAN BENTONIT TERMAGNETISASI SEBAGAI ADSORBEN CEPAT PISAH Dyah Ayu Pramoda Wardani; Akhmad Damsyik; Karelius Karelius; Suyanta Suyanta; Dwi Siswanta
Jurnal Sains dan Terapan Kimia Vol 15, No 2 (2021)
Publisher : Program Studi Kimia, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (626.361 KB) | DOI: 10.20527/jstk.v15i2.9726

Abstract

Bentonit merupakan material alam yang memiliki kecenderungan yang tinggi membentuk koloid, ukuran partikelnya yang dapat membesar sampai beberapa kali lipat jika terkontak dengan air dan membentuk suspensi, akan menimbulkan kesulitan dalam proses pemisahannya dari fasa cair setelah proses adsorpsi. Salah satu upaya untuk mengatasi kelemahan tersebut ialah dengan melakukan modifikasi bentonit menggunakan magnetit (Fe3O4), yang akan mengakibatkan adanya sifat kemagnetan pada material tersebut. Sifat kemagnetan ini diharapkan memudahkan pemisahan partikel–partikel bentonit termodifikasi setelah proses adsorpsi dapat dilakukan dengan mudah dan cepat menggunakan medan magnet eksternal. Dalam studi ini dikaji sifat kemagnetan bentonit termagnetisasi menggunakan instrumen VSM (Vibrating Sample Magnetometer) dan dikaji luas permukaan bentonit teraktivasi dan bentonit termagnetisasi menggunakan SSA (Surface Sorption Analyzer) berdasarkan persamaan BET.Hasil penelitian menunjukkan bahwa analisis VSM memberikan nilai Ms pada Fe3O4 murni lebih besar (64 emu/g) dibandingkan bentonit termagnetisasi (11 emu/g). Berdasarkan data analisis SSA diperoleh bahwa sampel bentonit termagnetisasi memiliki luas permukaan spesifik yang lebih kecil bila dibandingkan dengan bentonit teraktivasi, yaitu masing-masing sebesar 222 dan 138 m2/g.
Study of Microstructure and Optical Properties of Fe2O3/TiO2 Composites as Functional Materials Rendy Muhamad Iqbal; Erwin Prasetya Toepak; Dyah Ayu Pramoda Wardani; Elda Alyatikah; Stevin Carolius Angga; Luqman Hakim
Jurnal Sains dan Terapan Kimia Vol 16, No 2 (2022)
Publisher : Program Studi Kimia, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jstk.v16i2.12142

Abstract

 Semiconductors have conductivity levels between insulators and conductors which can be applied in various fields such as photocatalytic, adsorption, and Dye Sensitizer Solar Cell (DSSC). However, some semiconductors are only active under ultraviolet light, therefore to improve their utilization, modifications are made by producing a hybrid combination of two or more materials or dopping materials. This study aims to obtain a semiconductor material with a low band gap energy from the Fe2O3/TiO2 composite material. Fe2O3/TiO2 composites were synthesized by the solid-state method and characterized by XRD, SEM-EDX, and UV-Vis. The characterization using XRD showed the peak intensity of TiO2 and Fe2O3. The morphology of the material obtained using SEM-EDX showed an even distribution of particle size, as well as the distribution of Ti, Fe, and O elements. The optical properties of the composite showed strong absorbance in the UV region for higher TiO2 compositions. On the other hand, composite materials with a higher Fe2O3 composition showed stronger absorbance in the visible light region.
Utilization of Ferrate Ion (FeO42-) as Oxidizing Agent for Reducing Color Intensity of Peat Water Retno Agnestisia; Karelius Karelius; Rendy Muhamad Iqbal; Dyah Ayu Pramoda Wardani; Midun Efendi Patar Sihombing; Sri Yulandari Simangunsong; Junita Dongoran
Jurnal Sains dan Terapan Kimia Vol 17, No 2 (2023)
Publisher : Program Studi Kimia, Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jstk.v17i2.14832

Abstract

Peat water from Central Kalimantan is generally yellow to brownish-red in color. It causes peat water to not be used as a source of water for daily needs. Humic acid, fulvic acid, and humin are organic compounds that cause peat water to become colored. One alternative step that can be taken for reducing the color intensity of peat water is to degrade color-causing organic compounds by using an oxidizing agent. A hexavalent form of iron ion (Fe6+), commonly called ferrate (FeO42-) in potassium ferrate compound, is a powerful oxidizing agent used in the present study. Potassium ferrate (K2FeO4) was synthesized by a wet oxidation method and characterized using a UV-Vis spectrophotometer and an X-Ray Diffractometer (XRD). The ferrate solution is purplish-red in color with a maximum wavelength of 510 nm. The XRD pattern shows strong diffraction peaks at 2θ which are characteristic of K2FeO4. The ferrate solution was then used to degrade color-causing organic compounds  in the peat water from Central Kalimantan. Determination of the optimum degradation conditions was monitored by the absorbance decrease of organic compounds in peat water at a wavelength of 370 nm. The results showed that ferrate solution with a concentration of 80 ppm was able to degrade organic compounds in peat water at pH 8, with a  removal efficiency of 100%. Keywords: oxidizing agent, ferrate ion (FeO42-), peat water