Kukuh Aryo Wicaksono
Balai Besar Teknologi Pencegahan Pencemaran Industri

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Implementation Of Electrocatalytic Reactor As Oxidation Unit For Residual Reagent Wastewater Of Testing Laboratory Aris Mukimin; Kukuh Aryo Wicaksono; Nur Zen; Agus Purwanto; Hanny Vistanti
Jurnal Riset Teknologi Pencegahan Pencemaran Industri Vol. 9 No. 2 (2018)
Publisher : Balai Besar Standardisasi dan Pelayanan Jasa Pencegahan Pencemaran Industri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21771/jrtppi.2018.v9.no2.p11-20

Abstract

The remaining reagent from the sample analysis process become a significant source of hazardous waste of laboratory tasting activities. Methylene blue, phenol and oil are pollutants common in the remaining reagent waste. The electrocatalytic reactor is effective oxidation units for these organic pollutants. The reactor was made for a 50 L capacity with cylindrical metal oxide as the anode. The three anode which 6 cm in diameter and 50 cm in length were paired stainless cathode with the distance of 2.5 cm. The reactor was also equipped with a stirrer that is connected to the motor so that the mass transfer and oxidizing agents is more effective. The reactor application was carried out by feeding the remaining reagent waste into the electrocatalytic unit and giving DC potential 5 Volt. Each COD content for reagent waste of detergent: 2864 mg/L, phenol: 838 mg/L and oil: 708 mg/L. The reactor has reduced COD to 2157 mg/L (detergent), 399 mg/L (phenol) and 506 mg/L (oil) for 120 minutes. The high COD content in residual is caused by solvent (chloroform or hexane) that used at extraction step in determining the process of a sample. This compound is tough to oxidize into CO2 by OH radical or hypochlorite acid formed at the anode during the electrolysis process
Influence of Operational Condition on the Performance of Halotolerant Enriched - Activated Sludge System for Treating Medium Salinity Peanut Roasted Wastewater Rustiana Yuliasni; Nanik Indah Setianingsih; Kukuh Aryo Wicaksono; Nani Harihastuti
Jurnal Riset Teknologi Pencegahan Pencemaran Industri Vol. 9 No. 2 (2018)
Publisher : Balai Besar Standardisasi dan Pelayanan Jasa Pencegahan Pencemaran Industri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21771/jrtppi.2018.v9.no2.p46-54

Abstract

This research aimed to investigate the influence of operational condition on the performance of halotolerant enriched - activated sludge system for treating high organic wastewater with medium salinity from roasted peanut industry. Roasted peanut wastewater with VLR ranged from 0.268 to 4.7 kg COD/m3.day and Chloride concentration ranged between 1582 - 4392 mg/L was treated continuously for almost 77 days. Two identical reactor with Volume 25 L, namely R1 a conventional Activated Sludge (AS) System and R2, a halotolerant enriched-AS. Both reactors were running with operational condition: HRT (9 h to 46 h) and MLSS (1000-6000 mg/L). Compared to conventional AS system, Halotolerant enriched-Activated sludge system could remove average of 86.7% COD, compared with conventional AS which was 85.7%. Average COD effluent of Halotolerant Enriched-Activated Sludge was also considerably lower, which was 127 mg/L, than conventional AS which was 150 mg/L. Halotolerant enriched-activated sludge also produced less sludge, giving a high F/M ratio (4.9) compared with conventional AS (3.5). In order to make effluent fulfilled stream standard regulation (at central java region COD was<150 mg/L), the favorable operational condition for both reactors would be at VLR 0.268 to 2.03 kg COD, HRT was 25 hours HRT, with MLSS was 2584 – 3956 mg/L and maximum chloride concentration 1920 mg/L.